Power Bright 8-AWG6 8 AWG Gauge 6-Foot Professional Series Inverter Cables 800-1000 watt

Ofhc power Cable. 8 awg gauge 6 ft professional series battery Cables, recommended for use with PowerBright inverters up to 1000 watt Ultra Flexible. Ring terminal Connectors. 105 c high temperature / Chemical Resistant. High Amperage.

Stinger 8 Gauge Crimp Style Ring Terminal 2 Pair

Accepts direct connection of 8 gauge power wires. Can be used for audio, marine and any underhood wiring. 2 red and 2 black protective terminal covers. Very heavy duty. Corrosion resistant Gold Plating - High Power Delivery. 5/16 ring Opening.


Similar products

Pyramid RPR825 8 Gauge Power Wire 25 feet OFC (Clear Red)
Pyramid RPB825 Ground Wire 8-Gauge, 25 Feet, Flexible, OFC Cable Wire, Translucent (Black)
Pico 0969PT 60 AMP In-Line Maxi Fuse Holder with Dust Cap 8 AWG
InstallGear 8 Gauge Red 25ft Power/Ground Wire True Spec and Soft Touch Cable
Bussmann MAX60 Maxi Fuse
InstallGear 8 Gauge Black 25ft Power/Ground Wire True Spec and Soft Touch Cable
KnuKonceptz Kolossus Flex Kable 8 Gauge Power Wire Red OFC
Install Bay RVBC825 Red Vinyl Butt Connector 8-Gauge, 25-Bag
BNTECHGO 8 Gauge Silicone Wire 10 feet [5 ft Black And 5 ft Red] High Temperature Resistant Soft and Flexible 8 AWG Silicone Wire 1650 Strands of copper wire
KnuKonceptz Kolossus Flex Kable 8 Gauge Power Wire Black OFC


Blue Sea Systems 5025 ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Fuse block, mfg# 5025, atc/ato, 6 circuit, w/negative bus and cover, 32VDC max W/30Amp max per circuit & 100Amp per block.5/16 ring Opening. 3.

32"w x 4. 9"h x 1. 52"d. Positive distribution bus with #10-32 stud. Accepts direct connection of 8 gauge power wires. St blade fuse block - 6 circuits with negative bus and cover. Accepts ato and ATC fast acting blade fuses. Corrosion resistant Gold Plating - High Power Delivery. Very heavy duty. Fuses not included. Can be used for audio, marine and any underhood wiring.

2 red and 2 black protective terminal covers. Can be used for 24-hour circuits.


Similar products

Blue Sea Systems 10 Gang Common 150A Busbar with Cover
Ancor 108802 Marine Grade Electrical Primary Tinned Copper Boat Wiring (10-Gauge, Red, 25-Feet)
Ancor Marine Grade Duplex Cables
Blue Sea Systems 285-Series Surface Mount 100A Circuit Breaker
BEP 701 Battery Switches - On-Off
Blue Sea Systems Black 60 Label Set
270 PCS Heat Shrink Wire Connector Kit Electrical Insulated Crimp Marine Automotive Terminals Set
BlueFire Digital Voltmeter 12V Cigarette Socket Double USB Power Charger Adapter Flush Mount Waterproof 6 Gang Rocker Switch Panel Black for RV Car Boat
Purishion 4 Gang Rocker Switch Panel with Dual USB & Power Socket 12V-24V for Car Marine Boat Trailer (S8228)?-
Ancor 252246 Marine Grade Electrical Heavy Duty Tinned Copper Lugs (6-Gauge, Size 3/8 Screw, 2-Pack)


E2 by Scoshe EWFH Single ANL Fuse Holder

Durable finish and conductivity. Fuse nOT included. Accepts ato and ATC fast acting blade fuses. Positive distribution bus with #10-32 stud. Can be used for audio, marine and any underhood wiring. 2 red and 2 black protective terminal covers. Durable Finish and Conductivity. Anl fuse Holder. St blade fuse block - 6 circuits with negative bus and cover.

Accepts direct connection of 8 gauge power wires. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Platinum Plated wiring terminals and Accessories. Platinum-plated Wiring Terminals and Accessories.

Corrosion resistant Gold Plating - High Power Delivery. Easy installation of Multiple amplifier combinations. Very heavy duty. Easy installation Of Multiple Amplifier Combinations. 2- and 4-position distribution Blocks Along With A Wide Range Of Fuse Sizes. 5/16 ring Opening. Can be used for 24-hour circuits.


Similar products

Absolute ANL100-2, 2 Pack ANL Fuses 100 Amp Gold Plated
Cobra CPI-A4000BC 4-AWG Heavy-Duty AC Power Inverter Cable Kit
Absolute ANL200-2, 2 Pack ANL Fuses 200 Amp Gold Plated
bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt
Absolute USA ANL200-4 4 Pack ANL 200 Amp Gold Plated Fuse
BEP 701 Battery Switches - On-Off
Absolute ANL80-2, 2 Pack ANL Fuses 80 Amp Gold Plated
Install Bay ANL150-10 - 150 Amp ANL Fuses (10 Pack)
Power TechON PS1005 Pure Sine Wave Inverter (1500W Cont/3000W Peak)
AIMS Power REMOTEHF Flush Mount Power Inverter Remote On/Off Switch


Carwires PRT8 8-AWG Crimp Ring Terminals, 4-Pack

Platinum-Plated for Corrosion Resistance. 2 8-awg 5/16" ring Terminals. 2 8-awg 3/8" ring Terminals. Designed to securely connect power wires. We recommend using a crimp tool to make the best possible connection. Very heavy duty. Can be used for 24-hour circuits. Designed to provide a secure, crimp-on termination for 8-gauge power and ground wires.

2- and 4-position distribution Blocks Along With A Wide Range Of Fuse Sizes. Can be used for audio, marine and any underhood wiring. 2 red and 2 black protective terminal covers. Easy installation Of Multiple Amplifier Combinations. Accepts direct connection of 8 gauge power wires. Corrosion resistant Gold Plating - High Power Delivery.

Positive distribution bus with #10-32 stud. Accepts ato and ATC fast acting blade fuses. 5/16 ring Opening. Platinum-plated Wiring Terminals and Accessories. 4 rubber Protective Boots. Fuse nOT included.


Similar products

InstallGear 8 Gauge Red 25ft Power/Ground Wire True Spec and Soft Touch Cable
InstallGear 8 Gauge Black 25ft Power/Ground Wire True Spec and Soft Touch Cable
Pyramid RPR825 8 Gauge Power Wire 25 feet OFC (Clear Red)
Pyramid RPB825 Ground Wire 8-Gauge, 25 Feet, Flexible, OFC Cable Wire, Translucent (Black)
Stinger 8 Gauge Crimp Style Ring Terminal 2 Pair
BNTECHGO 8 Gauge Silicone Wire 10 feet [5 ft Black And 5 ft Red] High Temperature Resistant Soft and Flexible 8 AWG Silicone Wire 1650 Strands of copper wire
InstallGear 8/10 Gauge AWG In-Line AGU Fuse Holder with 60 Amp Fuse
InstallGear 4 Gauge AWG Crimp Ring Terminals Connectors - 4-Pack (2 Positive, 2 Negative)
Blue Sea Systems 10 Gang Common 150A Busbar with Cover
Install Bay RVBC825 Red Vinyl Butt Connector 8-Gauge, 25-Bag


Renogy TOOL-MC4 Solar Panel Mc4 ASSEMBLY Tool,

4 rubber Protective Boots. 8 gauge crimp Ring Terminals. Can be used for audio, marine and any underhood wiring. 2 red and 2 black protective terminal covers. Designed to securely connect power wires. St blade fuse block - 6 circuits with negative bus and cover. 2 8-awg 3/8" ring Terminals. Accepts direct connection of 8 gauge power wires.

5/16 ring Opening. Fuse nOT included. Platinum-plated Wiring Terminals and Accessories. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors.

Positive distribution bus with #10-32 stud. Easy installation Of Multiple Amplifier Combinations. Can be used for 24-hour circuits. Hard plastic. Corrosion resistant Gold Plating - High Power Delivery. 100% solid Brass Construction.


Similar products

RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect
Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm2 Solar Panel PV Cable
Renogy CNCT-MC4Y Branch Connectors Solar MC4 Connectors Y connector in Pair MMF+FFM
Sun YOBA 5 Pairs of MC4 Male/ Female Solar Panel Cable Connectors
50' solar cable Bulk Black copper #10 AWG 1000 volt PV Wire with Tough XLPE insulation
Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat
2 Sets of RENOGY Branch Connectors Solar MC4 Connectors Y connector in Pair MMF+FFM
Findyouled MC4 Male / Female Solar Panel Cable Connector, 20 Pairs
RENOGY 30A MC4 Waterproof In-Line Fuse Holder w/ Fuse
Signstek Y Branch MC4 Parallel Connector Adapter 1M2F+2M1F (1)


RENOGY 30A MC4 Waterproof In-Line Fuse Holder w/ Fuse

Plugging and unplugging while under voltage is permitted. Durable Finish and Conductivity. For breaking connections after they have already been locked together. Accepts ato and ATC fast acting blade fuses. 4 rubber Protective Boots. Very handy for the assembly of custom Mc4 wires. Fuse nOT included. Compatible with PV cables with different insulation diameters.

Designed for a wide range of DC applications. Auto-lock equipment of male and female points render connections easy and reliable. Waterproof - ip67 Class Protection and high current-carrying capacity. Connector adopts touch and insertion of reed with inner-knob type. Disconnected connectors should be protected from dirt and water with sealing caps.

Easy installation Of Multiple Amplifier Combinations. The end product must provide protection from electric shock. 8 gauge crimp Ring Terminals. Specifications renogy 30a mc4 solar in-line fuse holder waterproof w/ fuse rated current: 30a rated voltage: 1000 v dc test voltage: 6000v 50hz, 1 min degree of protection: ip2*/ip67 suitable connector: MC4 Connector Contact Resistance of Plug Connector:1mΩ Insertion Force / Withdrawal Force: ≤50N / ≥50N Contact Material: Copper, Silver Plated Fuse Can Replace Insulation Material: PPO Temperature Range: -40 to +125°C Weight: 1.

23 oz dimensions: 4. 8 x 0


Similar products

Renogy TOOL-MC4 Solar Panel Mc4 ASSEMBLY Tool,
RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect
Renogy CNCT-MC4Y Branch Connectors Solar MC4 Connectors Y connector in Pair MMF+FFM
RENOGY 8ft. 10 AWG Wire Copper Tray Cable - Connect Charge Controller and Battery
Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm2 Solar Panel PV Cable
2 Sets of RENOGY Branch Connectors Solar MC4 Connectors Y connector in Pair MMF+FFM
RENOGY 30A ANL Fuse Set w/ Fuse (ANL Fuse Holder + 30A ANL Fuse)
Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat
Renogy 200 Watt 12 Volt Monocrystalline Solar Starter Kit with Wanderer
Renogy AK-10FT-10 One Pair of 10Ft. 10AWG Adaptor Kit Solar Cable Pv with Mc4 Female & Male Connectors - Connect Solar Panel & Charge Controller


Renogy CNCT-MC4Y Branch Connectors Solar MC4 Connectors Y connector in Pair MMF+FFM

Platinum-plated Wiring Terminals and Accessories. Use these mc4 branch Connectors to make tight, waterproof connections. Positive distribution bus with #10-32 stud. Renogy mc4 branch connectors are used for parallel wiring solar panels PV modules. Platinum-Plated for Corrosion Resistance. Sold as a pair, these "y-connectors" will maintain the voltage of the solar panel configuration to match the battery size.

Designed to securely connect power wires. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. St blade fuse block - 6 circuits with negative bus and cover. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Can be used for 24-hour circuits. Hard plastic. Durable Finish and Conductivity. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. For breaking connections after they have already been locked together. Compatible with PV cables with different insulation diameters. Designed for a wide range of DC applications.




Similar products

Renogy TOOL-MC4 Solar Panel Mc4 ASSEMBLY Tool,
Renogy 100 Watts 12 Volts Monocrystalline Solar Panel
RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect
Renogy 2 Piece 100W Monocrystalline Photovoltaic PV Solar Panel Module, 12V Battery Charging
Renogy AK-20FT-10 10AWG Adaptor Kit Solar Cable PV with MC4 Female and Male Connectors, Connect Solar Panel and Charge Controller (1 Pair), 20'
Renogy Solar Panel Mounting Z Bracket 4 Units
Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat
Renogy AK-10FT-10 One Pair of 10Ft. 10AWG Adaptor Kit Solar Cable Pv with Mc4 Female & Male Connectors - Connect Solar Panel & Charge Controller
Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm2 Solar Panel PV Cable
RENOGY 30A MC4 Waterproof In-Line Fuse Holder w/ Fuse


Power Bright 4-AWG3 4 AWG Gauge 3-Foot Professional Series Inverter Cables 1000-1500 watt

105 c high temperature / Chemical Resistant. Durable Finish and Conductivity. Very handy for the assembly of custom Mc4 wires. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. 2 8-awg 3/8" ring Terminals. Ring terminal Connectors. 5/16 ring Opening. Can be used for audio, marine and any underhood wiring.

2 red and 2 black protective terminal covers. 2 8-awg 5/16" ring Terminals. Easy installation Of Multiple Amplifier Combinations. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. Ultra Flexible. 4 awg gauge 3 ft professional series battery cables, recommended for use with PowerBright inverters up to 1500 watt Accepts direct connection of 8 gauge power wires.

Platinum-plated Wiring Terminals and Accessories. Designed to securely connect power wires. St blade fuse block - 6 circuits with negative bus and cover. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Very heavy duty. High Amperage.


Similar products

Power Bright PW1500-12 Power Inverter 1500 Watt 12 Volt DC To 110 Volt AC
E2 by Scoshe EWFH Single ANL Fuse Holder
2PC 4 AWG Gauge Red Black Battery Post Inverter Cables Solar, Golf Car RV Boat
Camco 47453 Red 3/8" Stud 12" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned
Xantrex 806-1210 PROwatt 1000 SW Inverter
Arnold 16-Inch Battery Cable Set
Shoreline Marine Battery Marine Terminal Kit
BEP 701 Battery Switches - On-Off
Absolute ANL100-2, 2 Pack ANL Fuses 100 Amp Gold Plated
NOCO HM318BKS Group 24-31 Snap-Top Battery Box for Automotive, Marine, and RV Batteries


Ancor 252235 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 8-Gauge, Size 5/16 Screw, 2-Pack

Fuse nOT included. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. 4 rubber Protective Boots. 5/16 ring Opening. Designed to securely connect power wires. Heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Very heavy duty. Seamless barrel design allows for maximum strength when crimped.

100% solid Brass Construction. Ultra Flexible. Closed end to seal out moisture. Corrosion resistant Gold Plating - High Power Delivery. For breaking connections after they have already been locked together. 2 8-awg 3/8" ring Terminals. Platinum-Plated for Corrosion Resistance. Accepts ato and ATC fast acting blade fuses.

Compatible with PV cables with different insulation diameters. Designed for a wide range of DC applications. Auto-lock equipment of male and female points render connections easy and reliable. Waterproof - ip67 Class Protection and high current-carrying capacity. Connector adopts touch and insertion of reed with inner-knob type.




Similar products

Ancor 305148 Marine Grade Electrical Adhesive Lined Heat Shrink Tubing (1/2-Inch Diameter, 48-Inches Long, Black)
Ancor 111502 Marine Grade Electrical Tinned Copper Battery Cable (8-Gauge, Red, 25-Feet)
Blue Sea Systems 10 Gang Common 150A Busbar with Cover
PENSON CAYQK007010 Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool, 9 Dies, 10 Ton
Blue Sea Systems 285-Series Surface Mount 60A Circuit Breaker
Blue Sea Systems 5025 ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover
IWISS Cable Lug Crimper Crimping Tool Ratchet Crimp Hand Electrician Pliers Wire Cable 6-50mm²(AWG 10-1)--Thickened and Reinforced the Metal Plate!!
Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP
Ancor 311225 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals (16 to 14-Gauge, Size 8 Screw, 25-Pack)
Blue Sea Systems 30A MRBF Terminal Fuse


Power Bright 4-AWG6 4 AWG Gauge 6-Foot Professional Series Inverter Cables 1000-1500 watt

Easy installation Of Multiple Amplifier Combinations. For breaking connections after they have already been locked together. 2- and 4-position distribution Blocks Along With A Wide Range Of Fuse Sizes. 4 rubber Protective Boots. St blade fuse block - 6 circuits with negative bus and cover. Corrosion resistant Gold Plating - High Power Delivery.

High Amperage. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. Fuse nOT included. Ring terminal Connectors. Designed to securely connect power wires. Can be used for audio, marine and any underhood wiring. 2 red and 2 black protective terminal covers. Ultra Flexible. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C.

4 awg gauge 6 ft professional series battery cables, recommended for use with PowerBright inverters up to 1500 watt Accepts direct connection of 8 gauge power wires. Closed end design seals out moisture so cables stay dry and corrosion free. 105 c high temperature / Chemical Resistant. 100% solid Brass Construction.




Similar products

E2 by Scoshe EWFH Single ANL Fuse Holder
Power Bright 4-AWG3 4 AWG Gauge 3-Foot Professional Series Inverter Cables 1000-1500 watt
Absolute ANL100-2, 2 Pack ANL Fuses 100 Amp Gold Plated
Power Bright PW1500-12 Power Inverter 1500 Watt 12 Volt DC To 110 Volt AC
Power Bright 8-AWG6 8 AWG Gauge 6-Foot Professional Series Inverter Cables 800-1000 watt
Camco 47483 Red 3/8" Stud 12" Long 2-Gauge Marine Battery Cable and Tinned Lug Assembly
Absolute ANL200-2, 2 Pack ANL Fuses 200 Amp Gold Plated
Arnold 16-Inch Battery Cable Set
Power Bright 4-AWG12 4 AWG Gauge 12-Foot Professional Series Inverter Cables 1000-1500 watt
MicroSolar 12V 1000W (Peak 2000W) Pure Sine Wave Inverter - with Battery Cable & Remote Wire Controller