EPAuto 20-Inch Battery Inverter Cable Set

All copper conductor with nickel-plated copper terminals. Heavy duty safe UL 6 Gauge cables. Length: 20 inch. A set of positive Red and negative Black small cables. 1/4" ＆ 3/8" round center hole.

---

On-Off - BEP 701 Battery Switches

This ensures the switch meets ABYC requirements. Three removable side plates provide access of up to 1/0 cables. This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715. This switch offers a number of unique features, allowing it to be a stand alone unit, the highlight being the patented Contour Locking System, or locked together with other switches.

Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. The continuous and intermittent ratings are tested at 110% of specified ratings. The control knob can be removed by switching to an counterclockwise 45 degree position.

Control knob can be removed by switching to counter-clockwise 45° position. Operation: on/off, voltage: 48v dc, 1250a dc cranking 10 sec, 455A DC Intermittent 5 min, rating: 275a dc continuous 1hr, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds. All bep switches are tested Independently to this specification by a 3rd party laboratory. The rear cover insulating the rear terminals against any short circuits.


Similar products

---

Shoreline Marine Battery Marine Terminal Kit

Operation: on/off, 455a dc intermittent 5 min, rating: 275a dc continuous 1hr, 1250a dc cranking 10 sec, voltage: 48v dc, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Simply tighten around the post of your standard battery.

This ensures the switch meets ABYC requirements. Simple and easy way of converting a standard car battery for marine use. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Suitable for 12 and 24 Volt Applications. Provides the threaded post needed for marine applications.

Color coded coated wing nuts for added convience. Ignition protected. Coated wing Nuts For Added Convinence. Converts a standard Car Battery For Marine Use. Tin-plated copper studs and nuts. Standard Lead Terminals. Control knob can be removed by switching to counter-clockwise 45° position.


Similar products

---

Cllena Battery Disconnect Isolator Switch for Marine Boat Car Rv ATV Vehicles

Tin-plated copper studs and nuts. This ensures the switch meets ABYC requirements. Standard Lead Terminals. Can be used with 8v up to 60V DC systems to isolate and secure the electrical system. Ignition protected. Coated wing Nuts For Added Convinence. Disconnects the battery safely, sleek modern appearance, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sturdy and durable.

Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position. Instructions included: one Battery Switch not include bolts/hardware. Converts a standard Car Battery For Marine Use. Control knob can be removed by switching to counter-clockwise 45° position.

Suitable for 12 and 24 Volt Applications. 2-position: oN and OFF positions. Uv stabilized construction - built to last in marine conditions easy to install - Comprehensive wiring diagram and installation Specifications: Voltage: 8V to 60V DC Rated at 1250 Amps momentary @ 12V DC, 200 Amps continuous 12V DC Base: 2.

85" x 2. 85" 72. 5mm x 72.


Similar products

---

Cllena Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat Rv ATV Vehicles

Brand new and high-quality switch. Max. This ensures the switch meets ABYC requirements. Rust and corrosion resistant, Solid brass nuts and washers. Standard Lead Terminals. Waterproof cover can better protect key hole. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Extra heavy duty - rated at 1250 amps momentary, 200 Amps continuous 12V DC. Coated wing Nuts For Added Convinence. Withstanding current: 12V 500A. Easy to install & Simple To Use. Suitable for 12 and 24 Volt Applications. Instructions included: one Battery Switch not include bolts/hardware. Tin-plated copper studs and nuts.

Ignition protected. Converts a standard Car Battery For Marine Use. Specification: voltage: 12v rated current: 200A Max Current: 500A for 5 seconds Round disk diameter: 2. 36'' 60mm feet Spacing: 1. 35'' 34. 5mm height: 2.


Similar products

---

CISNO On/off Disconnect Switch for RV Battery Boat Caravan 275/1250 Amps Waterproof

Control knob can be removed by switching to counter-clockwise 45° position. Specification: voltage : 12v, 75a48v mounting screw diameter: 10mm dimensions: 68 x 68 x 65 mm operation: on/off color: black and red package include: 1 x disconnect switch with cover operation: on/off, rating: 275a dc continuous 1hr, 455A DC Intermittent 5 min, 24V, voltage: 48v dc, 150A24V, 48V DC Electric Current: 100A-300A Current Rating: 275A12V, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. 2-position: oN and OFF positions. Withstanding current: 12V 500A. Suitable for 12 and 24 Volt Applications. The rear cover insulating the rear terminals against any short circuits to meet ABYC requirements.

Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Converts a standard Car Battery For Marine Use. Rated at 1250 amps intermittent, 275 amps continuous at 12V. Can be used with 8v up to 60V DC systems to isolate and secure the electrical system.

Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable. Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position.




Similar products

---

Qiorange Car Battery Isolator Disconnect Cut OFF Power Kill Switch Pack of 1

2-position: oN and OFF positions. It can stand alone, or be locked together with other switches to isolate and secure the electrical system with 12V up to 48V systems. Waterproof cover can better protect key hole. Brand new and high quality. Rust and corrosion resistant, Solid brass nuts and washers. Tin-plated copper studs and nuts.

Rated at 1250 amps intermittent, 275 amps continuous at 12V. Withstanding current: 12V 500A. Max. Standard Lead Terminals. Description: Brand new and high quality Max. The rear cover insulating the rear terminals against any short circuits to meet ABYC requirements. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable. Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position.

Durable, non-corrosive, ABS plastic housing to resist the harsh marine conditions. Round disk diameter: 57. 5 mm round disk pitch: 37.


Similar products

---

NOCO HM318BKS Group 24-31 Snap-Top Battery Box for Automotive, Marine, and RV Batteries

Suitable for 12 and 24 Volt Applications. Rated at 1250 amps intermittent, 275 amps continuous at 12V. Move-able plates that allow different orientation for the wires. Designed for rugged environments; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, oil and other contaminants, gas, and immune to UV exposure.

Keeps your battery safe; limits water entry, allows adequate ventilation, effectively collects battery acid, and protects against accidental contact of battery terminals. Ships in certified Frustration-Free Packaging. This ensures the switch meets ABYC requirements. Can be used with 8v up to 60V DC systems to isolate and secure the electrical system.

Brand new and high quality. The noco snap-top battery Box is designed for Group 24-31 batteries. The rear cover insulating the rear terminals against any short circuits to meet ABYC requirements. The snap-top design effectively collects electrolytes, allows ventilation, secures and locks lid to prevent accidental contact of underground battery terminals.

Meets uscg code of Federal Regulations 183. 420 and abyc e-107 specification.


Similar products

---

Group 24 - Camco 55362 Standard Battery Box

Fits group size 24 batteries. Waterproof cover can better protect key hole. Camco rv standard battery box is a black lightweight, heavy-duty corrosion-resistant polypropylene box which is designed to secure and protect the battery. Max. The rear cover insulating the rear terminals against any short circuits to meet ABYC requirements.

Certified and tested; meets united states coast guard uscG Code of Federal Regulations 183. 420 and american boat and Yacht Council ABYC E-107 specifications. Extra heavy duty - rated at 1250 amps momentary, 200 Amps continuous 12V DC. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Instructions included: one Battery Switch not include bolts/hardware. This box meets uSCG CFR 183. 420 and abyc e-0107 specifications. In this way, power supply will not be viciously switched on. Waterproof cover can better protect key hole. Heavy-duty grade battery box for Automotive, Marine, RV and more; Designed for a single group 24-31 battery.




Similar products

---

Cllena Battery Isolator Disconnect Cut OFF Power Kill Switch for Car Boat Rv ATV

Brand new and high quality. Can be used with 8v up to 60V DC systems to isolate and secure the electrical system. Max. Ignition protected. Lightweight, heavy-duty corrosion-resistant polypropylene box. Specification: voltage: 12v rated current: 200A Max Current: 500A for 5 seconds Round disk diameter: 2. 36'' 60mm feet Spacing: 1.

35'' 34. 5mm height: 2. 99'' 76mm no key Overall height: 4. 25'' 108mm with key package included: 1 x battery switch 1 x key 1 x waterproof cover operation: on/off, 1250a dc cranking 10 sec, voltage: 48v dc, 455A DC Intermittent 5 min, rating: 275a dc continuous 1hr, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Unique patented design; features locking tabs to securely fasten the lid to the base, reinforced handles to prevent cracking during relocation, and vent caps to limit water entry. Suitable for 12 and 24 Volt Applications. Inside dimensions = 7 ¼" wide x 10 3/4" long X 8 " Tall with 2" additonal head room for battery terminals.

Meets uscg cfr 183. 420 and abyc E-107 specifications.


Similar products

---

Camco 55373 Large Battery Box - Groups 27, 30 and 31

Easy to install & Simple To Use. Includes lift-off lid, durable woven hold-down strap, foot clamps and stainless steel screws. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. It can stand alone, or be locked together with other switches to isolate and secure the electrical system with 12V up to 48V systems.

It fits group size 27, 30, and 31 batteries with inside dimensions measuring 7 ¼” Wide X 13 ¼” Long X 8 5/8” tall with 2” additonal head room for battery terminals. Withstanding current: 12V 500A. Includes lift-off lid, durable woven hold-down strap, foot clamps and stainless steel screws. Coated wing Nuts For Added Convinence.

Rust and corrosion resistant, Solid brass nuts and washers. The key can be taken down when there is no power connection. This box meets uSCG CFR 183. 420 and abyc e-0107 specifications. Unique patented design; features locking tabs to securely fasten the lid to the base, reinforced handles to prevent cracking during relocation, and vent caps to limit water entry.

Designed for rugged environments; impact resistant down to minus 20 degrees Fahrenheit, gas, withstands acid, oil and other contaminants, and immune to UV exposure.


Similar products