bearfire Car Logo LED Cup Pad led cup coaster USB Charging Mat Luminescent Cup Pad LED Mat Interior Atmosphere Lamp Decoration Light Toyota

The product is charging by a usb cable. Its interface is micro USB, the same as ordinary Android phones' interface. The charging port is placed on the edge of the product. Function description: led cup coaster with usb cable charge there is a button on the back of the smart glass pad, through press 2 seconds start the lights or turn off the lights, change color and mode.

. The product contains a vibration-sensitive device. The cable will be provided as the accessory. Charge the batteries before first time using. Package include： 2 x car led cup pad，1 usb cable charge led cup coaster with usb cable charge, there is a button on the back of the smart glass pad, through press 2 seconds start the lights or turn off the lights, change color and mode.

Steady on, red, combination, green, yellow, blue, RGB multicolor cup pad with 7colorswhite, pink, ice bule for you to choose. The product contains a vibration-sensitive device. When the car is shut off and the driver leaves, the light will stay on for 20 seconds and then enter the standby mode. Waterproof, easy to install, no tools and wiring needed.

Fit for any vehicles that come with the position of the CAR CUP HOLDER. When the car is shut off and the driver leaves, the light will stay on for 20 seconds and then enter the standby mode.

---

Bailongju Toyota Easy Installation Car Door LED Logo Projector Ghost Shadow Lights 2-pc Set

When the door is opened, the toyota logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle. Use a flathead screwdriver or installation Tool In The Package To Remove And Disconnect Original Door Step Lights; 2. Plug in new door lights With Correspondent Connector; 3.

Done! logo should Be Projecting On To The Ground. When you close the door, the logo light disappears. Compatibility: toyota 4 runner 2010 to 2018 avalon 2005 to 2018 camry 2007 to 2018 highlander 2001 to 2018 land cruiser 2008 to 2018 prius 2010 to 2018 sequoia 2013 to 2018 Sienna 2011 to 2018 Tundra 2007 to 2010 Venza 2009 to 2018 Package Include: 2 pieces welcome light Package Size: 9.

5 * 3. 8 * 9. 5 cm installation Instructions: 1. This welcome lights is positioned into the under surface of the front doors. Easy to install, no disassemblying, It will only take you about 5 minutes. When the door is opened, the toyota logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.

High definition and bright projection. Using high brightness LED chip, Very bright lighting output, Very low power consumption.


Similar products

---

Custom Fit Cup Holder and Door Liner Accessories for 2018 2019 Toyota Camry 16-pc Set Red Trim

This happens to less than 1% of orders The mats usually fix themselves over 1-2 weeks by being in a hot car. 1 mat will not work with cars that have wireless charging! glovebox liner may be slightly to big for some trims BUT WILL STILL FIT 1 EXTRA MAT IS INCLUDED FOR CARS WITHOUT BACK SEAT AIR VENTS. Patent pending design is simple to install, easy to clean, and provides a soft surface to prevent items from rattling in your cars compartments.

Includes a hassle free lifetime guarantee so that you will be protected for the lifetime of your car. No drilling, no wiring, no damage to your Car. You can then shake them out, and if needed wash them with warm soapy water. If you are in a cold climate you may need to use a hair dryer, wash the mat with hot water, or place them on your dashboard in the sun to fix the curling.

Curled mats: during shipping mats may get slightly bent and not sit flat in the compartments. Easy to install, no disassemblying, It will only take you about 5 minutes. When the door is opened, the toyota logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.

High definition and bright projection. Using high brightness LED chip, Very bright lighting output, Very low power consumption. Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.


Similar products

---

Ghost Shadow Logo Projector LED Courtesy Light For Toyota Highlander Land Cruiser Prado Sequoia Reiz Camry E'Z Corolla Alphard

Just taked out the your old light and insert this product without change wires or drill hole. Specifications: voltage: 12v color: white power consumption:3w material: ABS+Aluminum alloy Installed simply, Good looking and Utility Lower power consumption   Dedicated to the toyota car, Installation is simple, Directly replace the original car door lights.

Suitable for: for crown 2005-2013 ; for reiz 2006-2014 ;for camry 2006-2014; for highlander 2009-2013; for verso/ez 2011-2012; for corolla 2007-2011; for prius 2006-2012 For Previa 2006-2012; For Tundra 2011; For Alphard 2011-2014; For Sienna 2011-2014. Volt: dc12v;led type: high power for cree chip. Easy to install: no need to drill hole, no wires.

Play& plug, just replace your car door light. Laser logo light works as car courtesy light, the car logo will be projected on the ground. Easy to install, no disassemblying, It will only take you about 5 minutes. When the door is opened, the toyota logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.

High definition and bright projection. Using high brightness LED chip, Very bright lighting output, Very low power consumption. Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.


Similar products

---

Steel Interior center & Front console Cup Holder & Storage box Gears Frame cover trim Accessories for 2014 2015 2016 2017 2018 TOYOTA Tundra Storage box

Features: exterior or interior upgrades Protection Redefining the car personality Dedicated to the toyota car, Installation is simple, Directly replace the original car door lights. Great quality, made in a iso9001 9002 factory Easy installtion, 3M tape is attached at the back，Only need Stick by self.

No drilling, no wiring, no damage to your Car. Volt: dc12v;led type: high power for cree chip. Easy to install: no need to drill hole, no wires. Play& plug, just replace your car door light. Laser logo light works as car courtesy light, the car logo will be projected on the ground. Fit for 2014-2018 toyota tundra, but can't fit for 1794 and all 6 Seats model!!

Include : 1pcs in one set. Easy installtion, 3m tape is attached at the back，Only need Stick by self. When the door is closed, when you open the door, the light will be off automatically. Package including :2pcs logo door lights for Toyota 2PCS FOR 2 DOORS. Material : Made Of Stainless Steel. Fit for 2014-2018 toyota tundra condition: 100% brand new in Box Material : Made Of Stainless Steel Include : 1pcs in one set.

1 mat will not work with cars that have wireless charging! glovebox liner may be slightly to big for some trims BUT WILL STILL FIT 1 EXTRA MAT IS INCLUDED FOR CARS WITHOUT BACK SEAT AIR VENTS.


Similar products

---

Toyota Logo Lights Ghost Lamp Accessories Door Lights Projector Easy Installation Welcome Emblem for Camry/Prius/Sequoia/Sienna/Tundra/Venza

1. Easy to install-Direct Replacement. No modifications required. No wire cutting. Notes: if you cannot confirm whether these lights are compatible with your car model or some installation problems, Installation is simple, you can contact us at first! Dedicated to the toyota car, Directly replace the original car door lights.

Condition: 100% Brand new in Box. Suitable for: for crown 2005-2013 ; for reiz 2006-2014 ;for camry 2006-2014; for highlander 2009-2013; for verso/ez 2011-2012; for corolla 2007-2011; for prius 2006-2012 For Previa 2006-2012; For Tundra 2011; For Alphard 2011-2014; For Sienna 2011-2014. 4 runner 2010 to 2018  avalon 2005 to 2018  camry 2007 to 2018  highlander 2001 to 2018  land cruiser 2008 to 2018  prius 2010 to 2018  sequoia 2013 to 2018  sienna 2011 to 2018  tundra 2007 to 2010  venza 2009 to 2018  Specification: Input Power: 5w each LED bulb Voltage:DC 12/24v Working Temperature:-40℃-105℃ Lower Power Consumption How to replace car door lightInstallation Instructions: 1.

Volt: dc12v;led type: high power for cree chip. Easy to install: no need to drill hole, no wires. Play& plug, just replace your car door light. Laser logo light works as car courtesy light, the car logo will be projected on the ground. Include : 1pcs in one set. Easy installtion, 3m tape is attached at the back，Only need Stick by self.




Similar products

---

2 LED Door Step Courtesy Light Welcome Light Shadow Logo Projector Lamp F/Toyota Avalon Avanza Camry Corolla Crown Highlander Land Cruiser Prius Previa Sequoia Sienna Reiz Prado Tundra CNAutoLicht

Eta approx 7-20 days to US. 1 mat will not work with cars that have wireless charging! glovebox liner may be slightly to big for some trims BUT WILL STILL FIT 1 EXTRA MAT IS INCLUDED FOR CARS WITHOUT BACK SEAT AIR VENTS. Patent pending design is simple to install, easy to clean, and provides a soft surface to prevent items from rattling in your cars compartments.

Includes a hassle free lifetime guarantee so that you will be protected for the lifetime of your car. Just replace your car door Item Specifics: 1. Voltage: 12V 2. Led type: cree chip 3. Power consumption:5w 4. Material: Aluminum alloy 5. Installed simply, Good looking and Utility 6. Lower power consumption fit toyota: avalon 2006-2016 avanza 2007-2016 camry 2006-2016 corolla 2006-2016 crown 2006-2016 highlander 2009-2016 land cruiser 2006-2016 prius 2006-2016 previa 2006-2016 sequoia 2006-2016 Sienna 2006-2016 Reiz 06-16 Prado 09-16 Tundra 09-16 Package includes: 2pcs logo door lights for Toyota Dedicated to the toyota car, Installation is simple, Directly replace the original car door lights.

Volt: dc12v;led type: high power for cree chip. Easy to install: no need to drill hole, no wires. Play& plug, just replace your car door light. Laser logo light works as car courtesy light, the car logo will be projected on the ground.


Similar products

---

Envelope Style Trunk Cargo Net For Toyota Camry 2012 2013 2014 2015 2016 2017 2018 New

Pretty handy-envelope style with elastic polypropylene fabric pocket net, stretchy for easy loading and keep heavy items, make your life so much easier. Fit for 2014-2018 toyota tundra, but can't fit for 1794 and all 6 Seats model!! Direct fit- attach to mounting points in the rear cargo area with 4 self-locking hooks, all the mounting hardware is included for easy installation.

1 mat will not work with cars that have wireless charging! glovebox liner may be slightly to big for some trims BUT WILL STILL FIT 1 EXTRA MAT IS INCLUDED FOR CARS WITHOUT BACK SEAT AIR VENTS. Patent pending design is simple to install, easy to clean, and provides a soft surface to prevent items from rattling in your cars compartments.

Includes a hassle free lifetime guarantee so that you will be protected for the lifetime of your car. Material : Made Of Stainless Steel. Large capacity-it stretches around your stuff and you can cram even more things in it than ever before, make all the items secured in place without damaging them. The custom fit set is like floor mats for your door pockets, water rings, and center console areas providing unmatched protection from hard to clean spills, cup holders, glovebox, and scratches.

Guaranteed fit for your 2018+ toyota camry in any of the following trims: l, xle, le, and xse in regular, se, hybrid or v6 engine configurations. No drilling, no wiring Needed, Direct Plug & Play. Fit toyota avalon 2006-2016, avanza 2007-2016, corolla 2006-2016, crown 2006-2016, Camry 2006-2016, Highlander 2009-2016.




Similar products

---

Stainless Steel Interior Armrest cover bowl Cover trim for 2014 2015 2016 2017 Toyota Tundra

Material : Made Of Stainless Steel. 2014 2015 2016 2017 toyota Tundra Accessories. Fit for 2014-2017 toyota tundra condition: 100% brand new in Box Material : Made Of Stainless Steel Include : 1pcs in one set. Eta approx 7-20 days to US. When you open the car door will automatically turn on the high-definition projection and automatically turn off.

Fit for 2014-2018 toyota tundra, but can't fit for 1794 and all 6 Seats model!! Large capacity-it stretches around your stuff and you can cram even more things in it than ever before, make all the items secured in place without damaging them. Easy to install, no disassemblying, It will only take you about 5 minutes.

When the door is opened, the toyota logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle. High definition and bright projection. Using high brightness LED chip, Very bright lighting output, Very low power consumption. Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.

Four color options allow you to add a cool splash of color to your new Camry, while a double raised edge design keeps spills and crumbs contained within the liner. Suitable for: for crown 2005-2013 ; for reiz 2006-2014 ;for camry 2006-2014; for highlander 2009-2013; for verso/ez 2011-2012; for corolla 2007-2011; for prius 2006-2012 For Previa 2006-2012; For Tundra 2011; For Alphard 2011-2014; For Sienna 2011-2014.

No drilling, no wiring, no damage to your Car.


Similar products

---

Steel Interior dashboard Cup panel cover trim for 2014-2017 Tundra Accessories

Volt: dc12v;led type: high power for cree chip. Easy to install: no need to drill hole, no wires. Play& plug, just replace your car door light. Laser logo light works as car courtesy light, the car logo will be projected on the ground. Ship from china. Material : Made Of Stainless Steel. Condition: 100% Brand new in Box.

No drilling, no wiring Needed, Direct Plug & Play. Fit toyota avalon 2006-2016, corolla 2006-2016, avanza 2007-2016, crown 2006-2016, Camry 2006-2016, Highlander 2009-2016. Fit toyota land cruiser 2006-2016, sequoia 06-16, previa 2006-2016, prius 2006-2016, Sienna 06-16. Fit toyota reiz 06-16, prado 09-16, Tundra 09-16.

Pretty handy-envelope style with elastic polypropylene fabric pocket net, stretchy for easy loading and keep heavy items, make your life so much easier. Include : 1pcs in one set. Easy installtion, 3m tape is attached at the back，Only need Stick by self. Easy to install-direct replacement. No modifications required.

No wire cutting. Please kindly make sure your car has original car door lights before placing order.


Similar products

---

T-KB Toyota Black Premium Leather Car Key Chain Coin Holder Zipper Case Remote Wallet Bag

The custom fit set is like floor mats for your door pockets, water rings, cup holders, glovebox, and center console areas providing unmatched protection from hard to clean spills, and scratches. Guaranteed fit for your 2018+ toyota camry in any of the following trims: l, se, xle, and xse in regular, le, hybrid or v6 engine configurations.

Include : 1pcs in one set. Easy installtion, 3m tape is attached at the back，Only need Stick by self. Easy to install-direct replacement. No modifications required. No wire cutting. Please kindly make sure your car has original car door lights before placing order. Free from pollution, noise and electronic interference.

Enviroment friendly material makes your car more safe. Lasting constant, luminous uniformity, full of light and color. More visual enjoyment. Toyota light is a new type of green light source for automobiles. Using high brightness LED chip, More bright and clear with High quality. Super cool led logo projection on the floor for TOYOTA.

Brand newcolor blackbest leather toyota key wallet for your carkeep your auto key will not be heartedEasy to carry on your belt and put it your PocketLight weight smooth zipperLength:3.


Similar products