WZRELB 3000w Pure Sine Wave Solar Power Inverter Home Power supply Car Inverter Generator

#ad
Yueqing Reliable Electric co.,ltd RBP300012VCRT #ad - 5. Please use the set of standard battery cables we sent, or a full output may not be guaranteed. About wzrelb: professional manufacturer for pure sine wave power inverter for 10 years, provide prompt reply, friendly customer service and 18-month warranty. 2. Please do not overload. Prolongs battery life. Much more convenient for being used as car and home power supply.

High quality pure copper inductance, ensure the true pure sine wave AC output, filter the wave form, safeguard your equipment.3. Please turn off the load first then turn off the inverter. Product details: dc input: 12v dc input range: 10v-15v efficiency:85%-90% AC output: 120v Frequency: 60Hz Socket: Dual US type Low Voltage Alarm:9.

WZRELB 3000w Pure Sine Wave Solar Power Inverter Home Power supply Car Inverter Generator #ad - 5v-105v low voltage shut down: 9v-10v over load: shut off, recover manually Over Voltage Shut Down:15. 5v cooling ways: cooling fan will run when the temp is over 50 degree Celsius Precautions: 1. Please do not connect the inverter with the grid power, and a reverse connection of positive and negative is also forbidden.

There are build-in fuse for safety concern, the fuse come with package are just spare parts. 6. Considering transportation safety, we took off the battery of remote controller, you can buy it in your local place.

More information about Yueqing Reliable Electric co.,ltd RBP300012VCRT #ad

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

#ad
TOOL-MC4 TOOL-MC4 #ad - 100% compatible with Renogy MC4 connectors. For breaking connections after they have already been locked together. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors.

Very handy for the assembly of custom Mc4 wires. Hard plastic.

More information about TOOL-MC4 TOOL-MC4 #ad


Similar products



WindyNation ANL Fuse Holder + ANL Fuse 2pcs 300A Fuse

#ad
WindyNation ANL-Fh-300-2 #ad - Anl fuse holder will accept up to a maximum of 2/0 gauge cable. The windynation anl fuse holder with fuses are used in electrical systems in which the fuse is designed to burn out when the current exceeds the safe limit for the device being protected by the fuse. Anl fuse holder mounting bolts are 8 mm in diameter.

For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse. It is the end user's responsibility to determine the appropriate fuse size for the electrical circuit. Hard plastic. In general, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse.

WindyNation ANL Fuse Holder + ANL Fuse 2pcs 300A Fuse #ad - See images for technical specifications and dimensional drawings. Very handy for the assembly of custom Mc4 wires. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 300A Fuses. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolts.

For breaking connections after they have already been locked together. 100% compatible with Renogy MC4 connectors.

More information about WindyNation ANL-Fh-300-2 #ad


Similar products



Battery Monitor, DROK 10-100V Digital Battery Capacity Tester, Percentage Level Voltage Temperature Switch Meter Gauge 12V 24V 36V 48V LCD Display Marine RV Battery Power Indicator Panel

#ad
DROK #ad - Hard plastic. 100% compatible with Renogy MC4 connectors. Anl fuse holder mounting bolts are 8 mm in diameter. Drok 10-100v 12v 24v 36v battery monitor meter parameters: working voltage: 10V Min; 100V Max Working consumption: 5mA Typical; 6mA Max Voltage accuracy:±01%typical; ±05% temperature accuracy:±0

5℃typical; ±1℃ max sleep consumption: 6ua Min; 10uA Typical; 12uA Max Buzzer voltage: adjustable 11. 5v-100v   buzzer volume: 70db min; 75db typical; 80db max working temperature:-10℃Min; 25℃Typical; 55℃Max Product size: 61. 5*33. 5*13. 5mm installation size: 58. 5*28. 5mm display size: 36*19. 5mm package includes: 1* programmable Battery Display Very handy for the assembly of custom Mc4 wires.

Battery Monitor, DROK 10-100V Digital Battery Capacity Tester, Percentage Level Voltage Temperature Switch Meter Gauge 12V 24V 36V 48V LCD Display Marine RV Battery Power Indicator Panel #ad - Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolts. Application - suitable for 10-100v 12v 24v 36v 48v 60v 72v 96v lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Default 12 volt lead acid battery.

Protection - with protective shell, dustproof waterproof surface; input reverse connection protection.

More information about DROK #ad


Similar products



Renogy MC4 Y Branch Connectors Solar MC4 Connectors Y connector Solar panel mounts in Pair MMF+FFM

#ad
Renogy CNCT-MC4Y #ad - One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. These connectors are solely compatible with MC4 connectors and come with one male MMF and one female FFM connector. Use these mc4 branch Connectors to make tight, waterproof connections. Sold as a pair, these "y-connectors" will maintain the voltage of the solar panel configuration to match the battery size.

Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. See images for technical specifications and dimensional drawings. For breaking connections after they have already been locked together. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse.

Renogy MC4 Y Branch Connectors Solar MC4 Connectors Y connector Solar panel mounts in Pair MMF+FFM #ad - Anl fuse holder mounting bolts are 8 mm in diameter. Anl fuse holder will accept up to a maximum of 2/0 gauge cable. Hard plastic. 100% compatible with Renogy MC4 connectors. Very handy for the assembly of custom Mc4 wires. Renogy mc4 branch connectors are used for parallel wiring solar panels PV modules. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolts.

More information about Renogy CNCT-MC4Y #ad


Similar products



SELTERM UL Listed Heavy Duty Wire Lugs Battery Cable Ends Bare Copper Eyelets Tubular Ring Terminal Connectors

#ad
SELTERM #ad - See images for technical specifications and dimensional drawings. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. Very handy for the assembly of custom Mc4 wires. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. The copper lugs also meet S.

A. E conductivity standards and are RoHS compliant. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Lugs are suitable for use with Welding Cables and Battery Cables. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.

SELTERM UL Listed Heavy Duty Wire Lugs Battery Cable Ends Bare Copper Eyelets Tubular Ring Terminal Connectors #ad - 100% compatible with Renogy MC4 connectors. Default 12 volt lead acid battery. Protection - with protective shell, dustproof waterproof surface; input reverse connection protection. Lcd display - clear lcd color screen, voltage, battery capacity, temperature switched by the key. Installation - red wire for the positive, black wire for the negative.

Alarm - if low voltage, red indicator flashes and buzzer alarm. Compatible with mc4 connectors Also known as MC4 T connectors.

More information about SELTERM #ad


Similar products



Oxygenics White Standard 26781 Hand Held Sprayer Kit

#ad
Oxygenics 26781 #ad - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. For breaking connections after they have already been locked together. Hard plastic. Anl fuse holder mounting bolts are 8 mm in diameter. Oxygenic 26781 Hand Held Sprayer Kit. See images for technical specifications and dimensional drawings.

Can be Crimped or Soldered. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. Ul tested & Approved. Multiple available finishes will complement existing décor. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse.

Oxygenics White Standard 26781 Hand Held Sprayer Kit #ad - Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolts. Easily control the flow of water with the push of a button. Designed to achieve maximum performance with tank size and pressure limits. Application - suitable for 10-100v 12v 24v 36v 48v 60v 72v 96v lithium battery, lithium iron phosphate battery, lead-acid battery, Ni MH battery.

Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. Non-stick internal parts prevent mineral buildup and clogging, even in hard water conditions.

More information about Oxygenics 26781 #ad


Similar products



RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect

#ad
Renogy 5MC4 #ad - Renogy mc4 male/female solar panel cable connectors five pairs of mc4 solar panel cable connectors ten silver plated copper rated current: 30A Wiring size range: 10, 12 AWG contact resistance: contact material: silver plated copper insulation material: PA/pc warranty information 1-year material warranty.

This is to ensure the long term durability. Description renogy cable connectors are made with highest quality materials. You can feel that they are heavier & sturdier than other similar products in the market.

More information about Renogy 5MC4 #ad


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

#ad
Link Solar #201809213LS #ad - Heavy duty construction for Enhanced High Temperature Durability. Hard plastic. Anl fuse holder will accept up to a maximum of 2/0 gauge cable. These connectors are designed to complete a solar panel PV array, typically in parallel applications. Easily control the flow of water with the push of a button. For most applications, the fuse should be sized at approximately 1.

30 times the rated power of the device being protected by the fuse. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. These connectors are also waterproof and resist dust build up. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 300A Fuses. It can also be used for other installations and structures such as buildings, garages, sheds and other roofs Manufactured by Link Solar Very handy for the assembly of custom Mc4 wires.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat #ad - One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. Multiple available finishes will complement existing décor. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. For breaking connections after they have already been locked together.

100% compatible with Renogy MC4 connectors.

More information about Link Solar #201809213LS #ad


Similar products



WirthCo 20092 Battery Doctor 125 Amp/150 Amp Battery Isolator

#ad
WirthCo 1213.1241 #ad - Wirthco battery doctor battery isolator - 125/150 peak amperes is a state-of-the-art, fully automatic, dual battery controller that is suitable for any vehicle with an auxiliary battery. 100% compatible with Renogy MC4 connectors. See images for technical specifications and dimensional drawings. These connectors are also waterproof and resist dust build up.

High-performance electronic isolator allows you to charge two batteries from a single alternator, and keeps the starting battery isolated from the second battery. Very handy for the assembly of custom Mc4 wires. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 300A Fuses. Anl fuse holder will accept up to a maximum of 2/0 gauge cable.

WirthCo 20092 Battery Doctor 125 Amp/150 Amp Battery Isolator #ad - Non-stick internal parts prevent mineral buildup and clogging, even in hard water conditions. Also, with a single push of the override/reset button, you can change the batteries to parallel mode for jump-starting. An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc.

Water resistant IP62 - suitable for marine use. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. Designed to achieve maximum performance with tank size and pressure limits.

More information about WirthCo 1213.1241 #ad


Similar products



Dicor 501LSW-1 Epdm Self-Leveling Lap Sealant-10.3 Oz. Tube, White, 10.3 Fluid_Ounces

#ad
Dicor 501LSW-1 #ad - Very handy for the assembly of custom Mc4 wires. Application - suitable for 10-100v 12v 24v 36v 48v 60v 72v 96v lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Hard plastic. Anl fuse holder will accept up to a maximum of 2/0 gauge cable.

Easily control the flow of water with the push of a button. Anl fuse holder mounting bolts are 8 mm in diameter. Heavy duty construction for Enhanced High Temperature Durability. Suitable for most round cables for Solar Panel, DC power, satellite, Aerial, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

Dicor 501LSW-1 Epdm Self-Leveling Lap Sealant-10.3 Oz. Tube, White, 10.3 Fluid_Ounces #ad - The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. Designed to achieve maximum performance with tank size and pressure limits. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc.

Water resistant IP62 - suitable for marine use. Color: White.

More information about Dicor 501LSW-1 #ad


Similar products