Victron BatteryProtect 48V-100A

#ad
Victron Energy BPR048100400 #ad - Maximum continuous load current 100A. Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. 12/24v auto ranging the batteryprotect automatically detects system voltage Programming made easy The BatteryProtect can be set to engage/disengage at several different voltages.

The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage. If the battery voltage increases again to the connect threshold within this time period after the engine has been started for example, the load will not be disconnected. Delayed alarm output the alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds.

Victron BatteryProtect 48V-100A #ad - When using bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. A special setting for li-ion batteries In this mode the Battery Protect can be controlled by the VE. Bus bMS. Ignition proof: no relays but MOSFET switches, and therefore no sparks. Automatically detects system voltage.

The batteryprotect disconnects the battery from non essential loads before it is completely discharged which would damage the battery or before it has insufficient power left to crank the engine. Can be set to engage / disengage at several different voltages.

More information about Victron Energy BPR048100400 #ad

bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

#ad
bayite 8542110669 #ad - 4 in 1 meter; large-screen LCD displays voltage, current, active power, energy at the same time. Note: only display and shunt are included. 3. This module is only suitable for 6. 5~100v dc power. The blue backlight can be turned on/off manually Test Range and Display format: 1. Active power test range: 0~10kW 2.

Energy test range: 0~9999kWh 3. Voltage test range: DC 6. 5~100v 4. Current test range: 0~ 100A Precautions 1. Applied load should not exceed the rated power. Packing including: 1x DC 6. 5-100v 100a power multimeter Test range: voltage: dc 6. 5~100v; current: 0~100a; power: 0~10kW; Energy: 0~9999kWh. Store energy data when power offcan be reset to 0

bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt #ad - The blue backlight can be turned on/off manually. This module is suitable for indoor, please do not use outdoor. 2. 4.

More information about bayite 8542110669 #ad


Similar products