Victron BatteryProtect 12/24V-220A

#ad
Victron Energy BPR000220400 #ad - Disconnects the battery from non essential loads before it is completely discharged which would damage the battery or before it has insufficient power left to crank the engine. Use small on/off switch to switch heavy load. Note: the battery protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery.

Current 50 mA. Please see our Li-ion battery datasheet and the VE. Bus bms manual for more information. The seven segment display will indicate which setting has been chosen. Over voltage protection to prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

Victron BatteryProtect 12/24V-220A #ad - See connection diagram in the manual. 5 year warranty. The alarm output is typically used to activate a buzzer, LED or relay. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage. If the battery voltage increases again to the connect threshold within this time period after the engine has been started for example, the load will not be disconnected.

The batteryprotect disconnects the battery from non essential loads before it is completely discharged which would damage the battery or before it has insufficient power left to crank the engine.

More information about Victron Energy BPR000220400 #ad

Tenergy 5-in-1 Battery Meter, Intelligent Cell Meter Digital Battery Checker Battery Balancer for LiPo / LiFePO4 / Li-ion / NiCd / NiMH Battery Packs

#ad
Tenergy 01444 #ad - Battery balancer: optimize your battery's performance, and extend the overall lifespan, by ensuring the individual cells are balanced. Use this function to quickly check if your battery requires charging before use. By discharging your battery prior to charging will improve the runtime of your battery. Battery balancer - the battery tester with balancer function helps to optimize your batteries performance and extend the overall lifespan by ensuring the individual cells are balanced.

Internal resistance tester - for lithium-based battery packs, the battery internal resistance tester function will display the internal resistance of each individual cell. Battery discharger: Discharging your battery prior to changing can improve the runtime of your battery. For lipo/lifepo4/li-ion packs, it can also display the voltage of each cell, so you know when they need to be balanced.

Note: a y-harness and 4. 8v-6v nimh battery not included is needed to support ESC/Servo function. Esc/servo ppm tester: supply a reliable PPM signal to test and adjust your servo motors. Battery capacity checker tenergy 5-in-1 cell meter can display the estimated capacity and voltage for LiPo / NiCd / Li-ion / LiFePO4 / NiMH battery packs.

Tenergy 5-in-1 Battery Meter, Intelligent Cell Meter Digital Battery Checker Battery Balancer for LiPo / LiFePO4 / Li-ion / NiCd / NiMH Battery Packs #ad - Package includes 1 x 01444 tenergy 5-in-1 cell meter for lipo / li-ion / lifepo4 / nicd / nimh battery packs 1 x user manual multipurpose battery meter - the tenergy 5-in-1 cell meter has multiple functions as it can display the estimated voltages for LiPo/LiFePO4/Li-ion 2-7 cells packs and individual cells & NiCd / NiMH batteries for TX and RX 4-7 cells.

More information about Tenergy 01444 #ad


Similar products



ISDT BattGo BG-8S Battery Meter, LCD Display Digital Battery Capacity Checker Battery Balancer Battery Tester for LiPo/Life/Li-ion/NiMH/Nicd

#ad
Shenzhen ISD Technology Co., Ltd ISDT-BG-8S #ad - Support Qualcomm QC 2. 0/3. 0, compatible with BC1. 2 and Apple devices. Bg-8s also supports multiple protocol analysis including PWM, PPM&S. Bus and etc. With future firmware upgrades more Protocol analysis will be supported. After completion auto into low power mode. Powerful portable charging function: connecting to your battery, bg-8S can become your power bank for mobile devices.

Advanced auto balancing algorithm, make sure every cell is well balanced. Maximum output 12V/2A. Receiver signal test and protocol analysis: with standard 3 pin plug, bg-8S can detect BEC output voltage. Support lihv, lilon, lipo, life, NiMh/Cd battery and BEC output measurements. Xt60i meant for battgobg-8s uses xt60i connector which was jointly developed by ISDT and Amass, support BattGO technology, and highly compatible with original XT60 plugs.

ISDT BattGo BG-8S Battery Meter, LCD Display Digital Battery Capacity Checker Battery Balancer Battery Tester for LiPo/Life/Li-ion/NiMH/Nicd #ad - SpecificationInput voltage 1s: 08v-15vinput voltage 2-8S: 08v-4. 8vbattery cells: 1-8SVoltage measurement accuracy: ±0005v @ 4. 2vbalancing cells accuracy: < 0

More information about Shenzhen ISD Technology Co., Ltd ISDT-BG-8S #ad


Similar products



ANJOSHI Circuit Breaker 50amp 50A-300A with Manual Reset Home Solar System Fuse Holder for Car Audio and Amps Protection 12V-24V DC Reset Fuse Inverter Replace Fuses

#ad
ANJOSHI #ad - Please order and use the Circuit Breaker with right work temperature, to avoid it is too heat and stop work. Specification: 1. Multipurpose battery meter - the tenergy 5-in-1 cell meter has multiple functions as it can display the estimated voltages for LiPo/LiFePO4/Li-ion 2-7 cells packs and individual cells & NiCd / NiMH batteries for TX and RX 4-7 cells.

Any quality issue, simple contact us by eMAIL To Get Full Money Back, only order from ANJOSHI store. Material: Plastic and metal 2. Support liHv, XH2. 54 1-8s balance lead, XH 2. 54 3pin, life, lilon, nimh/Cd battery and BEC output measurements. Make battery smarter: cooperating with battgo technology, battery cycles, only with XT60i connected and you can get full knowledge on detail parameters on your battery.

ANJOSHI Circuit Breaker 50amp 50A-300A with Manual Reset Home Solar System Fuse Holder for Car Audio and Amps Protection 12V-24V DC Reset Fuse Inverter Replace Fuses #ad - Maximum output 12V/2A. Receiver signal test and protocol analysis: with standard 3 pin plug, bg-8S can detect BEC output voltage. 6. With future firmware upgrades more Protocol analysis will be supported. Manual reset circuit breaker 50A-300A for choose and Compatible with all 12-24 Volt Systems. Connection way: any side for positive, another is negativefeatures: mount on panel or firewall stops power surges from damaging Your Amps Rubber Boots for water protection Save Your Money to Replacing Fuses Protects Your Trolling Motor From Electrical Damage Unique Push Button Reset can also be used as a Kill Switch Application: Suitable for car audio/video system, buses, RV's, trucks, Boat, ATV Winches and marine and DC sound amplifier system overload protection.

More information about ANJOSHI #ad


Similar products



uxcell New BIG-Size Voltage Converter Regulator DC/DC DC 24V Step-Down to DC 13.8V 40A 552W Buck Transformer Waterproof

#ad
uxcell a16080800ux0427 #ad - If you use solar panel to supply directly, please note that the open circuit voltage of the solar panel cannot exceed the maximum withstand voltage of the converter. Unique push button Reset and Save Your Money to Replacing Fuses. The supply voltage should be within the rated voltage and always leave a certain margin.

Any quality issue, simple contact us by eMAIL To Get Full Money Back, only order from ANJOSHI store. Easy to read cells voltage, working parameters and fast set to your preferred settings. Stops power surges from damaging Your Amps, Protects Your Trolling Motor From Electrical Damage. Support Qualcomm QC 2.

uxcell New BIG-Size Voltage Converter Regulator DC/DC DC 24V Step-Down to DC 13.8V 40A 552W Buck Transformer Waterproof #ad - 0/3. 0, compatible with BC1. 2 and Apple devices. Maximum output 12V/2A. Receiver signal test and protocol analysis: with standard 3 pin plug, bg-8S can detect BEC output voltage. Product name: waterproof voltage Converter Regulator DC 24V to DC 13. 8v 40a 552wfeatures:1. Protections: over-current, over-load and Short-circuit, Over-temperature, Over-voltage, auto-recovery when device is back to normal operating.

More information about uxcell a16080800ux0427 #ad


Similar products



Giandel 2000W Pure Sine Wave Power Inverter DC 24V to AC120V with Dual AC Outlets with Remote Control 2.4A USB and LED Display

#ad
GIANDEL PS-2000KAR #ad - Usb output: 1xDC 5V/2. 4amax output wave: pure sine wave THD. Specifications: power 2 ac outlets:24vdc 2000W Rated, 4000W peak Don't use 12V battery. A must-have for your road trips, outdoors, vacations, emergency kits and more. About giandel a leading inverter brand in Australia, professional devoted to providing quality products with a better price for consumers.

More information about GIANDEL PS-2000KAR #ad


Similar products



ELECFUN 56pcs 8-4 AWG Assorted Heavy Duty Lugs Battery Cable Tinned Copper Ring Terminal Connectors with Spy Hole

#ad
ELECFUN #ad - Use the battery checker tester to evaluate the health of your battery pack and decide when to discard or replace it. Esc/servo ppm tester - the Servo tester supplies a reliable PPM signal to test and adjust your servo motors. Multiple measurement connections: support xt60/xt60i, lipo, jst etc to measure voltage.

After completion auto into low power mode. Powerful portable charging function: connecting to your battery, bg-8S can become your power bank for mobile devices. Ul approved. The battery capacity checker can quickly check the estimated capacities for Lithium based battery pack and indicate if it requires charging before use.

ELECFUN 56pcs 8-4 AWG Assorted Heavy Duty Lugs Battery Cable Tinned Copper Ring Terminal Connectors with Spy Hole #ad - Battery discharger - at the discharge rate of 180mA, the battery balancer discharger can discharge lithium-based battery packs to an adjustable threshold. Thank you for choosing ELECFUN. Advanced auto balancing algorithm, make sure every cell is well balanced. This is a 24v dc 2000w pure sine wave power and 4000w peak power, with LED display, DC 24V, 120V AC Dual Outlets and 1x2.

4a usb port. Wide applications with remote: the remote control is more convenient to control the inverter ON/Off while applied to RV, Boat, Truck, Car and Solar System. Fully safety protections:over voltage, Low voltage, Overload, Over heat, Short circuit, polarity reverse protectionfuse.

More information about ELECFUN #ad


Similar products



SmartSolar MPPT 100/50 Charge Controller

#ad
Victron Energy SCC110050210 #ad - Stops power surges from damaging Your Amps, Protects Your Trolling Motor From Electrical Damage. Waterproof ip68 voltage converter regulator DC 24V to DC 13. 8v 40a 552w. Protections: over-load, Over-current, Over-temperature, Short-circuit, Over-voltage. Auto-recovery when device is back to normal operating; high transfer efficiency of 95% max.

Die-cast aluminum shell, display screen of bus and taxi, and moisture-proof and has stronger durability. Widely used in bus, cmb, large trucks, anti-shock, solar generate electricity, motor, car audio device. Note: it is recommended to use stable dc power for the input power supply if you use the pulsed DC power provided by the generator, please filter it with capacitor before connecting it to the converter.

SmartSolar MPPT 100/50 Charge Controller #ad - The supply voltage should be within the rated voltage and always leave a certain margin. Don't connect to 12v battery. Easy to read cells voltage, working parameters and fast set to your preferred settings. Advanced auto balancing algorithm, make sure every cell is well balanced. If you use solar panel to supply directly, please note that the open circuit voltage of the solar panel cannot exceed the maximum withstand voltage of the converter.

Any quality issue, simple contact us by eMAIL To Get Full Money Back, only order from ANJOSHI store. Smatsolar mppt charge controller, mfG# SCC110050210, 50 Amp.

More information about Victron Energy SCC110050210 #ad


Similar products



bayite DC 5-120V 400A Mini Digital Current Voltage Amp Meter Gauge with Hall Effect Sensor Transformer

#ad
bayite #ad - Bg-8s also supports multiple protocol analysis including PWM, PPM&S. Bus and etc. The sensor doesn't get hot like the current shunt sense resistor which can have thermal temperature heat dissipation issues. If your signal is too weak or you are not getting the resolution you want, triple, you can coil the wire through the current sensor as many times as you want to double, or quadruple the sensitivity or resolution.

For example, if your current signal is only 2 Amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 20 Amps. Unique push button Reset and Save Your Money to Replacing Fuses. For example, if your current signal is only 2 Amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 20 Amps.

bayite DC 5-120V 400A Mini Digital Current Voltage Amp Meter Gauge with Hall Effect Sensor Transformer #ad - This is a 24v dc 2000w pure sine wave power and 4000w peak power, DC 24V, with LED display, 120V AC Dual Outlets and 1x2.4a usb port. Wide applications with remote: the remote control is more convenient to control the inverter ON/Off while applied to RV, Boat, Truck, Car and Solar System. Fully safety protections:over voltage, Low voltage, Overload, Over heat, Short circuit, polarity reverse protectionfuse.

Auto-restart function. Led display:easy to see battery input voltage, output power. Isolated input/Output Design and Soft start tech.

More information about bayite #ad


Similar products



Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover

#ad
BLW6A 2315 #ad - Inspection hole design is conveniently to check the cable conductor is fully inserted. 2 mounting holes accept #10 M5 screws. Any quality issue, simple contact us by eMAIL To Get Full Money Back, only order from ANJOSHI store. Support Qualcomm QC 2. 0/3. 0, compatible with BC1. 2 and Apple devices. Ul approved. After completion auto into low power mode.

Powerful portable charging function: connecting to your battery, bg-8S can become your power bank for mobile devices. 18-months Warranty. With future firmware upgrades more Protocol analysis will be supported. Manual reset circuit breaker 50A-300A for choose and Compatible with all 12-24 Volt Systems. Measure positive or negative current.

Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover #ad - By discharging your battery prior to charging will improve the runtime of your battery. Battery balancer - the battery tester with balancer function helps to optimize your batteries performance and extend the overall lifespan by ensuring the individual cells are balanced. Internal resistance tester - for lithium-based battery packs, the battery internal resistance tester function will display the internal resistance of each individual cell.

Smartsolar mppt 100/50 Charge Controller. Multipurpose battery meter - the tenergy 5-in-1 cell meter has multiple functions as it can display the estimated voltages for LiPo/LiFePO4/Li-ion 2-7 cells packs and individual cells & NiCd / NiMH batteries for TX and RX 4-7 cells.

More information about BLW6A 2315 #ad


Similar products



Victron BMV-712 Battery Monitor

#ad
Victron Energy MONITOR-VTBMV-S #ad - Max voltage: 300v aC/ 48V DC. The bmv-712 features an additional input which can be programmed to measure the voltage of a second battery, battery temperature or midpoint voltage. Multipurpose battery meter - the tenergy 5-in-1 cell meter has multiple functions as it can display the estimated voltages for LiPo/LiFePO4/Li-ion 2-7 cells packs and individual cells & NiCd / NiMH batteries for TX and RX 4-7 cells.

18-months Warranty. By discharging your battery prior to charging will improve the runtime of your battery. Battery balancer - the battery tester with balancer function helps to optimize your batteries performance and extend the overall lifespan by ensuring the individual cells are balanced. Internal resistance tester - for lithium-based battery packs, the battery internal resistance tester function will display the internal resistance of each individual cell.

Victron BMV-712 Battery Monitor #ad - Any quality issue, simple contact us by eMAIL To Get Full Money Back, only order from ANJOSHI store. Next to the basic display options, the bmv-700 series also displays the state of charge, current and ampere-hours consumed, time to go, such as voltage, and power consumption in Watts. Support Qualcomm QC 2.

0/3. 0, compatible with BC1. 2 and Apple devices.

More information about Victron Energy MONITOR-VTBMV-S #ad


Similar products