TOPAC 12 Volt 2/10/20A, 24 Volt 2/10A Smart Car Battery Charger

Smart and intelligent: Micro processor monitors the battery charger to provide the best condition to prolong battery life. Short circuit, reverse polarity, overload, and over heat protection. Etl certified. This part can't be shipped to Oregon or California. Multiple applications: choosing 12v the current is 2/10/20 amp, while choosing 24V the current is 2/10 Amp, for use on any 12V & 24V lead-acid batteries AGM, gel, or WET automotive or marine battery systems.

Fully automatic: automatic 7-stage high frequency charging technology delivers a faster and more efficient charge. Intuitive information: LED display provides visual state-of-charge feedback. Safe and full protection: 1 year warranty.

Ampper Battery Switch, 12-48 V Battery Power Cut Master Switch Disconnect Isolator for Car, Vehicle, RV and Boat On/Off

Order it now! heavy duty: abs plastic housing, rear cover insulates terminals against any short of circuits, durable made for safety use, equiped with 4 sets of bolts. Operation: on/off 2 positions, 275 a continuous at dc 12V, 455 a intermittent at dc 12v, 1250 A momentary at DC 12V. Compatible: used for dc 12 - 48 v systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.

Purpose: eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. Copper terminal stud size: 3/8" 10 mm x 2, Rv and boat, very easy to install, universal used for car, vehicle, also electrical equipment's switch.4, copper terminal studs with nuts and washers.

7, used for dc 12 - 48v systems to isolate and secure the electrical system. 5, 4 mounting screw holes. Complete kits includes: 1 x battery switch. 4 sets of mounting bolts. 10, disconnects the battery safely. 6, 275 a continuous at dc 12v, 455 a intermittent at DC 12V, 1250 A momentary at DC 12V.11, universal used for Car, Vehicle, RV and Boat.

8, can stand alone or be locked together with other switch.


Similar products

Cartman 4AWG 18-Inch Battery Inverter Cables Set, 4Gauge x 18" (1 Black & 1 Red)
Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover
CARTMAN 4AWG 24-Inch Battery Inverter Cables Set, 4Gauge x 24" (1 Black & 1 Red)
SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug [B35]
12V 4 Gang Rocket Switch Panel Blue LED Indicator, Waterproof with 15A Fuse 5V Dual 2.1A USB Charger Socket for DC 24V Marine Boat Car Rv Vehicles Truck
InstallGear 5 AWG Gauge 2ft Battery Power Inverter Cables for Solar, Auto, RV & Marine - 99.9% Oxygen-Free Copper (Set)
NOCO HM318BKS Group 24-31 Snap-Top Battery Box
Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar (4 x 10-32 Stud Terminal with Cover)
Kohree 5 Gang Rocker Switch Panel 12V Waterproof for RV Boat Car Vehicles Truck Marine, Toggle Led Switch Panel Digital Voltmeter Display Dual USB Charger Port DC 12/24 Volt Socket 12/24V Blue Lighted
Maxdot 10 Pack UL Wire Lugs 8 Gauge 8 AWG 3/8 Inch Stud Ring terminals Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug with Heat Shrink Black, Red (8 AWG 3/8 Ring)


10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

The vinyl-dipped grip is very comfortable and easy to use and won’t slip. It is much easier than using a pair of hand crimpers. Heavy duty: abs plastic housing, rear cover insulates terminals against any short of circuits, durable made for safety use, equiped with 4 sets of bolts. Operation: on/off 2 positions, 275 a continuous at dc 12V, 455 a intermittent at dc 12v, 1250 A momentary at DC 12V.

Compatible: used for dc 12 - 48 v systems to isolate and secure the electrical system, can stand alone or be locked together with other switch. Purpose: eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. Copper terminal stud size: 3/8" 10 mm x 2, very easy to install, Rv and boat, universal used for car, vehicle, also electrical equipment's switch.

Durability & safety: made of durable materials with high strength and good toughness. The c-style head makes side entry easier to change the dies. It includes 9 pairs of dies which can crimp cable cross section area from 4mm2 to 70mm2. Attention: do not assemble or operate when tired or when under the influence of drugs or medication.

Package includes: 1x hydraulic crimper 9pairs of hexagon crimping dies4, 8, 16, 70 1x Instruction 1X Carrying case HYCLAT Hydraulic crimping tool is an efficient tool for crimping lugs, terminals, 35, 10, 5, 50, 25, or conductors on a cable or wire. The maximum power is 10 tons.


Similar products

SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug [B35]
SELTERM 5 Pack 2/0 Gauge 2/0 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets [B80]
Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft
50pcs Copper Wire Lugs,10 Types UL Listed Heavy Duty Wire Lugs Battery Cable Closed Ends Bare Copper Eyelets Tubular Ring Terminal Connectors Assortment Kit
Glarks 125Pcs Marine Grade Heavy Duty Tinned Copper Wire Lugs Battery Cable Ends Eyelets SC Ring Terminal Connectors Assortment Kit
LuckIn 1/8 T316 Stainless Steel Cable with Cutter, Aircraft Cable for Deck Railing, 7 x 7 Strands Construction, 300FT
RockDIG 50 pcs AWG 8/6/4/2 Heavy Duty Bare Copper Lugs, Closed End Tubular Ring Terminals, Battery Electrical Cable Wire Connectors Assortment Kit(with 50 pcs Heat Shrink Tubings)
Muzata Stemball Swage Dead Ends Paired Threaded Stud Tension End Fitting Terminal for 1/8" Cable Railing,Hand Crimp Fixed Tensioner,Stainless Steel T316 20PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1
Glarks 100Pcs Copper Wire Lugs with Heat Shrink Set, 50Pcs UL Listed Battery Cable Closed Ends Bare Copper Eyelets Tubular Ring Terminal Connectors with 50Pcs Heat Shrink Tubing Black, Red
LuckIn 1/8 T316 Stainless Steel Cable with Cutter, Aircraft Cable for Deck Railing, 7 x 7 Strands Construction, 600FT


Dremel 290-05 120-Volt Industrial Engraver

Replaceable carbide point lets you engrave on most surfaces. Optional 9929 diamond point not included for heavy-duty use on hard surfaces. When the pressure reaches the maximum value, it will release automatically. Humanized design: with this professional crimper, you can crimp wires and butt connectors easily.

Heavy duty: abs plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits, equiped with 4 sets of bolts. Operation: on/off 2 positions, 455 a intermittent at dc 12v, 275 A continuous at DC 12V, 1250 A momentary at DC 12V. Compatible: used for dc 12 - 48 v systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.

Purpose: eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. Copper terminal stud size: 3/8" 10 mm x 2, universal used for car, Rv and boat, vehicle, very easy to install, also electrical equipment's switch. Durability & safety: made of durable materials with high strength and good toughness.

The c-style head makes side entry easier to change the dies. Stroke adjustment dial regulates engraving depth from fine lines to deep grooves. The 290-05 kit contains the 290-01 tool + additional accessories. Letter/number template helps etch words and numbers ; Soft grip adds extra comfort and control.


Similar products

Dremel 9929 Engraver Diamond Point Bit
1 x Letter and Number Stencil Sets - Sizes 8, 10, 20, 30mm - Assorted Colors
Westcott Letter Stenciling Guides (4 sizes)
Brady Blank Valve Tags - Round Brass Tags, 1-1/2" Diameter, B-907 (Pack Of 25) - 23210
Letter Number Metal Template Set, JoyTong Drawing Planner Stencil
Bazic Letter and Number Stencil Sets - Sizes 8, 10, 20, 30mm - Assorted Colors, 4 Per Pack, Sold as 6 Pack
Coilhose Pneumatics TYP-2500CS Typhoon High Volume Blow Gun, 1/4-Inch NPT with High Flow Tip
Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
Klein Tools 32561 Multi-Bit Screwdriver / Nut Driver, 6-in-1 Stubby Screwdriver with 2 Phillips, 2 Slotted Bits, 2 Nut Drivers
Bondhus 16937 Set of 13 Balldriver L-wrenches with BriteGuard Finish, Long Length, sizes .050-3/8-Inch