Indestructible Holder fits Mini and OLD size EZ Pass not the Flex or HOV switch models, I Pass, I Zoom, PalPass hard case and FasTrak transponders. Holder only. Made in USA – JL Safety EZ Pass-Port

JL Safety EZP300 - Easy to Install & Remove. Look for our ez pass-mateā„¢ holder for EZPass Flex with HOV switch. Lifetime Warranty. Fits old & new i-pass, palpass, ez-Pass not HOV switch models, quickpass, FasTrak & others in pics. Unbreakable. Will never melt, discolor, deform, break, or rattle. Compact design, easily tucked behind mirror, and will not block driving sight.

Made in USA. It has an industrial grade suction cup that is patented to diffuse sun light and allows you to easily attach it to windshield, and remove it when needed by pulling on the single suction cup tab that is easily accessible and conveniently located below the toll pass. Sale is for 1 holder only. Single industrial grade suction cup for extreme hot & cold condition.

Indestructible Holder fits Mini and OLD size EZ Pass not the Flex or HOV switch models, I Pass, I Zoom, PalPass hard case and FasTrak transponders. Holder only. Made in USA - JL Safety EZ Pass-Port - Your toll pass is gently held so it does not rattle or spin or fall. Easy to attach and remove, yet will never fall under any weather condition. Simply clip in your transponder and stick it to windshield. It is simply unbreakable, compact and easy to use. Also fits i pass, i Zoom, PalPass hard case and FasTrak.

Toll pass is not included, shown in photos for clarification. No adhesive strips to use, no glued parts and no plastic to melt, making it the best on the market against extreme hot and cold conditions.

More information about JL Safety EZP300

EZ Pass Toll Tag Holder,Fits New & Old Transponder,i-Pass,i-Zoom, Clear

USCAN 13 - The best way to attach your ez pass Toll Tag to the windshield of your Car, Truck, RV, or Motorcycle. No adhesive necessary. The e-z mount toll pass holder allows you to firmly mount your toll transponder to your windshield without the sticky mess of a permanent adhesive. Avoid risking a costly toll violation.

The e-z mount toll pass holder attaches to your windshield using dual suction cups making it easy to install, easy to remove and easy to switch between vehicles. The e-z mount toll pass holder is clear and made from lightweight UV resistant ABS plastic and comes with a lifetime guarantee. Suitable for the following states: nj ny pa de il in oh va wv md ma ri nh sc fl and i-pass c-pass palmetto pass.

Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups. Its large suction cups securely hold the tag in place. Without using permanent adhesive strips. Toll authorities require that toll passes be firmly affixed to your windshield, not hand held.

EZ Pass Toll Tag Holder,Fits New & Old Transponder,i-Pass,i-Zoom, Clear - For use with both the new smaller kapsch Model 801660A-TAB and the original Mark IV transponder See back of unit Please check compatibility. E-z mount easily removes for cleaning the windshield, or when you are switching to another vehicle or when you just don't need it. Not for use with EZ Pass Flex, FasTrak.

More information about USCAN 13


Similar products



The Silicone Skin for EZ Pass! Make Your EZ Pass More Discreet in Your Car with This Silicone Holder Suitable for EZ Pass Mini, Most Recent Version of Transponder for Tolls - EZ SKIN

IoT Slash E-Z SKIN - Said no one ever! make your ez pass more discreet with this high-quality Silicone Skin. Suitable for the following states: nj ny pa de il in oh va wv md ma ri nh sc fl and i-pass c-pass palmetto pass. Does not increase the size of your EZ Pass. Not for use with EZ Pass Flex, FasTrak. Made of high-quality flexible silicone.

Your car will thank you! the best way to attach your ez pass Toll Tag to the windshield of your Car, Truck, RV, or Motorcycle. No adhesive necessary. For use with both the new smaller kapsch Model 801660A-TAB and the original Mark IV transponder See back of unit Please check compatibility. Does not interfere with the standard adhesive strips.

The Silicone Skin for EZ Pass! Make Your EZ Pass More Discreet in Your Car with This Silicone Holder Suitable for EZ Pass Mini, Most Recent Version of Transponder for Tolls - EZ SKIN - Wraps your eZ Pass in a neutral black color. That white piece of plastic with text, a logo and a barcode looks so nice in my car". Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups. Its large suction cups securely hold the tag in place.

More information about IoT Slash E-Z SKIN


Similar products



Allinko Holder for EZ, Zoom, PalPass, FasTrak, Quick, Elite, PrePass, Fast Lane, Pass Windshield Fits All New Toll Transponders, Mounting Strips Included

Allino Toll Pass Holder - Fits all i-pass, palpass and i-zoom transponders 4. Easily tucked behind rearview mirror for safe driving> 8. E-z mount easily removes for cleaning the windshield, or when you are switching to another vehicle or when you just don't need it. Color:transparent allinko toll pall holder for all EZPass models features: 1.

Fits all new toll transponders: our pass holder offers compatibility with a wide range of toll transponders including: the old and new EZ Pass, Elite Pass, I Pass, I Zoom, FasTrak, PalPass, Quick Pass, PrePass, Fast Lane HOV Switch model. Easy to install and remove: the toll pass Holder attaches to your windshield using dual suction cups making it easy to install, easy to remove and easy to switch between vehicles.

Allinko Holder for EZ, Zoom, PalPass, FasTrak, Quick, Elite, PrePass, Fast Lane, Pass Windshield Fits All New Toll Transponders, Mounting Strips Included - Long lasting: dual industrial grade suction cups allow you to firmly mount your toll transponder to your windshield without the sticky mess of a permanent adhesive. Four strips included: won't shake, rattle, or fall of. Mount it anywhere on your windshield specifications: holer material: transparent plastic suction cup material: pvc strips size: 1.

18'' x 05'' holder length: 3. 94'' 10cm holder width: 2. 19'' 5. 55cm weight: 1oz the best way to attach your ez pass Toll Tag to the windshield of your Car, Truck, RV, or Motorcycle.

More information about Allino Toll Pass Holder


Similar products



Heat & Cold Resistant! Fits Mini and Old EZ Pass, I Pass, I Zoom, PalPass hard case and FasTrak Transponders - EZ Pass Toll Tag Holder

Toolfetch 8542113463 - Does not increase the size of your EZ Pass. Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups. Its large suction cups securely hold the tag in place. Without using permanent adhesive strips. Fits all new toll transponders: our pass holder offers compatibility with a wide range of toll transponders including: the old and new EZ Pass, I Zoom, Elite Pass, Quick Pass, FasTrak, PalPass, I Pass, PrePass, Fast Lane HOV Switch model.

Easy to install and remove: the toll pass Holder attaches to your windshield using dual suction cups making it easy to install, easy to remove and easy to switch between vehicles. Long lasting: dual industrial grade suction cups allow you to firmly mount your toll transponder to your windshield without the sticky mess of a permanent adhesive.

Heat & Cold Resistant! Fits Mini and Old EZ Pass, I Pass, I Zoom, PalPass hard case and FasTrak Transponders - EZ Pass Toll Tag Holder - Four strips included: won't shake, rattle, or fall of. High temperature performance will withstand up to 200 degrees. Compact and durable design: compact design that hides behind the smallest tall tag and your toll pass including the holder can easily be hidden behind your rearview mirror. Universal fit. Throw away those annoying velcro stickers and connect your EZ Pass to your windshield within seconds and if you don't like where you put it simply remove it off and connect it in your desired location.

The ez pass toll tag holder is the easiest solution to connecting your EZ Pass to your windshield.

More information about Toolfetch 8542113463


Similar products



CANOPUS EZ Pass Mounting Strips: 3M Dual Lock Tape Ezpass Tag Holder, Peel-and-Stick Strips 6 Set with Alcohol Prep Pad 3 Pieces - Pack of 3

CANOPUS - Highly weather resistant and can resist heat and cold. Ez pass mounting kit - 3m dual lock tape - peel-and-stick strips with Alcohol Prep Pad, 3 Sets Pack of 3 Includes twelve 3M Dual Lock strips 6 Set 1. 5 x. 5 inches, rv, truck, three concentrated canopus adhesive Remover Pads for cleaning old residue The best way to attach your ez pass Toll Tag to the windshield of your Car, or Motorcycle.

No adhesive necessary. Does not increase the size of your EZ Pass. Indoor/outdor use; high temperature performance up to 200 degrees; Industrial Strength. All instructions can be Found below and Use the Images Provided as a Guide! . Water, dirt, buzz, block signals, and UV resistant. Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups.

CANOPUS EZ Pass Mounting Strips: 3M Dual Lock Tape Ezpass Tag Holder, Peel-and-Stick Strips 6 Set with Alcohol Prep Pad 3 Pieces - Pack of 3 - Its large suction cups securely hold the tag in place. Without using permanent adhesive strips. Excellent for mounting your EZPass / Ipass / Sunpass to the windshield. Easy peel and stick application. High temperature performance will withstand up to 200 degrees.

More information about CANOPUS


Similar products



8pcs 4sets Reclosable Fastener with Alcohol Prep Pad - AutoBoxClub - EZ Pass/IPass/Fastlane Mounting Kit

AUTOBOXCLUB - Reclosable fastener that are same as most Toll Pass mounting strips. Highly weather resistant and can resist heat and cold. Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups. Its large suction cups securely hold the tag in place. Without using permanent adhesive strips.

Works with most toll passes including: EZ Pass, IPass, FastLane, and other toll passes.100% money-back guarantee - all of our autoboxclUB products are backed by 100% guarantee that you are fully satisfied with your product or receive your money back. High temperature performance will withstand up to 200 degrees.

8pcs 4sets Reclosable Fastener with Alcohol Prep Pad - AutoBoxClub - EZ Pass/IPass/Fastlane Mounting Kit - Compact and durable design: compact design that hides behind the smallest tall tag and your toll pass including the holder can easily be hidden behind your rearview mirror. Universal fit. Fits old & new i-pass, palpass, ez-pass not hov switch models, QuickPass, FasTrak Not for Latest Fastrak Transponders.

Easy to open - frustration Free Plastic Packaging! Just open and use! Suitable for the following states: nj ny pa de il in oh va wv md ma ri nh sc fl and i-pass c-pass palmetto pass. Fits all new toll transponders: our pass holder offers compatibility with a wide range of toll transponders including: the old and new EZ Pass, PrePass, FasTrak, Quick Pass, Elite Pass, PalPass, I Pass, I Zoom, Fast Lane HOV Switch model.

Easy to install and remove: the toll pass Holder attaches to your windshield using dual suction cups making it easy to install, easy to remove and easy to switch between vehicles.

More information about AUTOBOXCLUB


Similar products



eZpassClip New EZ Pass Holder for New, Small Toll Tag Transponder Black

NuCorp17 Inc. 13 - Reclosable fastener that are same as most Toll Pass mounting strips. Not for use with EZ Pass Flex, FasTrak. Made of high-quality flexible silicone. Clear fastener backed Ezpass strips with a clear acrylic pressure sensitive adhesive. Ezpassclip is proudly made in the USA of high density UV resilient plastic.

All instructions can be Found below and Use the Images Provided as a Guide! Suction cup attachment for easy installation! Installs within Seconds! Does not increase the size of your EZ Pass. Ezpassclip allows you to safely mount your toll tag without Velcro, making it easier to switch between vehicles or totally remove it.

eZpassClip New EZ Pass Holder for New, Small Toll Tag Transponder Black - Includes twelve 3m dual lock strips 6 set 1. 5 x. 5 inches, three concentrated Canopus Adhesive Remover Pads for cleaning old residue. Ezpassclip is proudly made in the USA of high density, UV resilient plastic. Your ezpassclip is ready to use. Ezpassclip is your mounting solution for the new-style transponder.

Ezpassclip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft. Ezpassclip mounts with two suction cups to your windshield.

More information about NuCorp17 Inc. 13


Similar products



Allison 54-0109 Black Toll Pass Holder

Allison 54-0109 - Highly weather resistant and can resist heat and cold. Available in either black or white. Makes it easy to use your electronic toll tag in multiple vehicles. Indoor/outdor use; high temperature performance up to 200 degrees; Industrial Strength. Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups.

Its large suction cups securely hold the tag in place. Without using permanent adhesive strips. Easily remove it to prevent theft. Reclosable fastener that are same as most Toll Pass mounting strips. Ezpassclip is proudly made in the USA of high density, UV resilient plastic. Your ezpassclip is ready to use. Water, dirt, block signals, buzz, and UV resistant.

Allison 54-0109 Black Toll Pass Holder - Made in U. S. A. Designed to be used for the new size EZ pass transponders. Does not interfere with the standard adhesive strips. Color black.

More information about Allison 54-0109


Similar products



CAR DOCUMENTS HOLDER CASE 5" x 4.5" for Insurance, DMV, Registration, AAA, Auto Club, for Car Truck SUV, Motorcycle, touch fastener closure, safely store documents in glove box or visor flap

MacoodeCompany 13 - Reclosable fastener that are same as most Toll Pass mounting strips. Organization - have your insurance card and DMV vehicle registration safe and accessible, when you need it. Protection - your automotive documents are protected and kept neat for inspection. Ezpassclip is proudly made in the USA of high density, UV resilient plastic.

Your ezpassclip is ready to use. Fits old & new i-pass, quickpass, ez-pass not hov switch models, PalPass, FasTrak Not for Latest Fastrak Transponders. Easy to open - frustration Free Plastic Packaging! Just open and use! Clear fastener backed Ezpass strips with a clear acrylic pressure sensitive adhesive.

CAR DOCUMENTS HOLDER CASE 5" x 4.5" for Insurance, DMV, Registration, AAA, Auto Club, for Car Truck SUV, Motorcycle, touch fastener closure, safely store documents in glove box or visor flap - Especially important users are young drivers who may not know all of the names for the various documents the case contains but if stopped, they just pull the Car Documents holder out and are able to retrieve the correct card or receipt for review. Made in U. S. A. For use with both the new smaller kapsch Model 801660A-TAB and the original Mark IV transponder See back of unit Please check compatibility.

E-z mount easily removes for cleaning the windshield, or when you are switching to another vehicle or when you just don't need it. Fits all new toll transponders: our pass holder offers compatibility with a wide range of toll transponders including: the old and new EZ Pass, Quick Pass, I Zoom, PalPass, Elite Pass, PrePass, FasTrak, I Pass, Fast Lane HOV Switch model.

More information about MacoodeCompany 13


Similar products



AutoBoxClub Clear - New EZ Pass, IPass Tag Holder/Transponder Holder/Toll Pass Windshield Mount/Genuine Reclosable Mounting Strips Included/UV-Protective/Installs in Seconds

AUTOBOXCLUB 5 - Does not interfere with the standard adhesive strips. Suction cup attachment for easy installation! Installs within Seconds!8 pcs 4 sets that is enough up to 2-4 vehicles. Premium 2ply alcohol prep Pad Included to clean the area before applying. The best way to attach your ez pass Toll Tag to the windshield of your Car, RV, Truck, or Motorcycle.

No adhesive necessary. Color black. Mounts to the windshield of your vehicle with three suction cups. Fits old & new i-pass, quickpass, palPass, ez-pass not hov switch models, FasTrak Not for Latest Fastrak Transponders. Easy to open - frustration Free Plastic Packaging! Just open and use! Includes twelve 3m dual lock strips 6 set 1.

AutoBoxClub Clear - New EZ Pass, IPass Tag Holder/Transponder Holder/Toll Pass Windshield Mount/Genuine Reclosable Mounting Strips Included/UV-Protective/Installs in Seconds - 5 x. 5 inches, three concentrated Canopus Adhesive Remover Pads for cleaning old residue. Suitable for the following states: nj ny pa de il in oh va wv md ma ri nh sc fl and i-pass c-pass palmetto pass. Not for use with EZ Pass Flex, FasTrak. Made of high-quality flexible silicone. All instructions can be Found below and Use the Images Provided as a Guide!

Clear fastener backed Ezpass strips with a clear acrylic pressure sensitive adhesive.

More information about AUTOBOXCLUB 5


Similar products