Icstation DC-DC Adjustable Voltage Regulator DC Buck Converter 5.3V-32V to 1.2V-32V 12A CVCC Step Down Power Supply Module LCD Display Digital Voltmeter Ammeter with Shell

#ad
Icstation Digital DC Step Down Voltage Regulator #ad - Parameters: Working Voltage: DC 5. 3v-32v output voltage: DC 1. 2v-32v output current: 12a 12a need heat sink; 8a is stable for long time output power: 160W 160W need heat sink; 120W is for 8A Voltage Display Range: 0~32V Voltage Display Precision: +/-05v voltage Display Resolution: 005v current display range: 0~12A Current Display Precision: +/-0

3a current Display Resolution: 001a conversion efficiency: about 96% working current: 25ma soft starter: yes failure at high power load anti-reverse protection: yes anti-backflow protection: yes Working Temperature range: -20℃~85℃ Working Humidity range: 0%-95%RH Package Including: 1pc 12A Step Down Power Supply Module; 1pcs Heat Sink; 2pcs Acrylic shell; 2pcs Blue button cap; 4pcs M3*15mm Copper column; 4pcs M3*8+6mm Copper column; 8pcs M3*5mm Screw.

Icstation DC-DC Adjustable Voltage Regulator DC Buck Converter 5.3V-32V to 1.2V-32V 12A CVCC Step Down Power Supply Module LCD Display Digital Voltmeter Ammeter with Shell #ad - Icstation buck converter input voltage range is dc 5. 3-32v; output voltage range is dc 1. 2-32v, if enhance dissipation, can be arbitrary adjustable; output current can be 8A for long term use, if enhance heat dissipation, it can reach 12A; max output power is 120W, it can reach 160W. Lcd screen hd display: the voltage regulator module is designed with LCD, can display input and output voltage, output current and output power; voltage display resolution is 0

05v, current display resolution is 0005a. Safe protection: support complete disability output; Anti-reverse protection; Short circuit protection; Anti-backflow protection;.

More information about Icstation Digital DC Step Down Voltage Regulator #ad

Icstation Voltage Capacity Tester Moudle 12V-48V Lithium-ion Lead-acid Battery Status Indicator LCD Digital Power Monitor for Balance Car Vehicle Skateboard Blue Backlight

#ad
Icstation #ad - Backlight on current: 40 mA, Max 50 mA ;7. Capacity accuracy: ±3. 0%;6. Then power on or turn on the switch, the red line to the positive, black line and red line. The tester will be work normally correspond code a below form. Attention: the tester cannot be exposed in the sun for a long time. Finally, fix the tester with tapping screws from the front of the panel.

Adjustment: press and hold the down key on the back when turn off, then power on. Then, power on or turn on the switch, it will be work. Install: first, open one rectangular orifice and two screw holes on the panel of the equipment. Working dissipation: 8 mA, Max 10 mA;3. Connect the black line to the negative, it will be work.

Icstation Voltage Capacity Tester Moudle 12V-48V Lithium-ion Lead-acid Battery Status Indicator LCD Digital Power Monitor for Balance Car Vehicle Skateboard Blue Backlight #ad - Voltage and capacity percent meter can be applied to mobile and portable equipment in addition to smartphones and PCs, skateboard, e-bike, balance car, such as universal auto, cleaning machine, vehicle, instrument and so on. Lithium iron phosphate battery does not suitable. Auto battery tester moudle owns a high quality and clear LCD display, super bright backlight, check the battery status accurately and timely; one key touch button control the backlight and switch the capacity or voltage display.

Easy connection: this tester module provides a connector consists of plug, the plug to the socket of tester. Sleep dissipation: 15 uA;4.

More information about Icstation #ad


Similar products



eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module

#ad
eBoot EXPSFD005794 #ad - Icstation battery voltage capacity tester can not only test the battery capacity percentage, but also the voltage value. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. This battery monitor can tolerate widest working voltage range DC 8-63V.

Digital battery status indicator is suitable for 12v/24v/36V/48V lead acid battery and 3~15 cells lithium ion battery 8V-63V, meet your various application. Connect the black line to the negative, it will be work. Voltage and capacity percent meter can be applied to mobile and portable equipment in addition to smartphones and PCs, e-bike, balance car, such as universal auto, skateboard, vehicle, cleaning machine, instrument and so on.

eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module #ad - Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Lithium iron phosphate battery does not suitable. Auto battery tester moudle owns a high quality and clear LCD display, super bright backlight, check the battery status accurately and timely; one key touch button control the backlight and switch the capacity or voltage display.

Easy connection: this tester module provides a connector consists of plug, the plug to the socket of tester. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

Keep it under 2.

More information about eBoot EXPSFD005794 #ad


Similar products



AUSTOR 100 Pcs PCB Board Kit Including 30 Pcs Double Sided Prototype Boards and 30 Pcs 40 Pin 2.54mm Male and Female Header ConnectorBonus: 10 Pcs 2P&3P Screw Terminal Blocks and 30 Pcs Jumper Caps

#ad
AUSTOR #ad - Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

Jumper caps: 30 pieces standard 2. 54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color. Great tool for Arduino proto shield. Screw terminal Block Pitch: 5. 08mm, 5. 08-301-2p, 5. 08-301-3p rated voltage: 300v, rated current: 16A Jumper Caps Pitch: standard 2. 54mm pin spacing package include 2x8cm prototype pcb universal board * 10 3x7cm prototype pcb universal board * 10 4x6cm Prototype PCB universal board * 5 5x7cm Prototype PCB universal board * 5 40 Pin male header connector * 10 40 Pin pitch right angle male headers * 10 40 Pin female header connector * 10 5.

AUSTOR 100 Pcs PCB Board Kit Including 30 Pcs Double Sided Prototype Boards and 30 Pcs 40 Pin 2.54mm Male and Female Header ConnectorBonus: 10 Pcs 2P&3P Screw Terminal Blocks and 30 Pcs Jumper Caps #ad - 08-301-2p * 5 5. 08-301-3p * 5 jumper caps * 30 free plastic box * 1 product warranty austor Direct Customer Service Team is dedicated to offering our valued customers a great and professional services - Timely email reply, Helpful solutions, Refund & Return Warranty. Any questions you have, please don't hesitate to contact us.

More information about AUSTOR #ad


Similar products



12v Regulator, DROK Waterproof Synchronous DC-DC Converter Buck 5.5-32V to 1-27V Voltage Regulator 24V to 12 V to 5V 5A Adjustable VDC Solid Durable Power Supply Board

#ad
DROK 090011 #ad - Jumper caps: 30 pieces standard 2. 54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color. Connect the black line to the negative, it will be work. Voltage and capacity percent meter can be applied to mobile and portable equipment in addition to smartphones and PCs, e-bike, such as universal auto, cleaning machine, vehicle, skateboard, balance car, instrument and so on.

Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

12v Regulator, DROK Waterproof Synchronous DC-DC Converter Buck 5.5-32V to 1-27V Voltage Regulator 24V to 12 V to 5V 5A Adjustable VDC Solid Durable Power Supply Board #ad - This battery monitor can tolerate widest working voltage range DC 8-63V. Digital battery status indicator is suitable for 12v/24v/36V/48V lead acid battery and 3~15 cells lithium ion battery 8V-63V, meet your various application. 2. If use for battery, please install a separate output diode to stop the battery from feeding back and damaging the unit.

Then power on or turn on the switch, the red line to the positive, black line and red line. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Package include: 1x dc voltage converter Icstation battery voltage capacity tester can not only test the battery capacity percentage, but also the voltage value.

More information about DROK 090011 #ad


Similar products



Onyehn 2Pcs 1.8v 3v 5v 6v 7.2v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch 2 Pack

#ad
Onyehn #ad - This battery monitor can tolerate widest working voltage range DC 8-63V. Digital battery status indicator is suitable for 12v/24v/36V/48V lead acid battery and 3~15 cells lithium ion battery 8V-63V, meet your various application. Double check all connections before applying power and always turn off the power supply before making any wiring changesDue to different batches of products, backplane style and cap color are shipped randomly Icstation battery voltage capacity tester can not only test the battery capacity percentage, but also the voltage value.

Lithium iron phosphate battery does not suitable. Auto battery tester moudle owns a high quality and clear LCD display, super bright backlight, check the battery status accurately and timely; one key touch button control the backlight and switch the capacity or voltage display. Easy connection: this tester module provides a connector consists of plug, the plug to the socket of tester.

Onyehn 2Pcs 1.8v 3v 5v 6v 7.2v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch 2 Pack #ad - Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Please allow 1-3mm differs due to manual measurement. Important notes: an appropriately rated fuse rated a little higher than the maximum current you expect to draw is recommended to ensure safe operation.

14g note: dc motor speed regulator DC power supply, do not be directly connected to household 220V AC. 32*32*15mm/1.

More information about Onyehn #ad


Similar products



ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
ELEGOO EL-CP-004 #ad - Connect the black line to the negative, it will be work. Voltage and capacity percent meter can be applied to mobile and portable equipment in addition to smartphones and PCs, cleaning machine, such as universal auto, vehicle, balance car, skateboard, e-bike, instrument and so on. Input: dc 3 v to 40 v input voltage must be 1.

5 v higher than the output voltage, no boost. Lithium iron phosphate battery does not suitable. Auto battery tester moudle owns a high quality and clear LCD display, super bright backlight, check the battery status accurately and timely; one key touch button control the backlight and switch the capacity or voltage display.

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - Easy connection: this tester module provides a connector consists of plug, the plug to the socket of tester. Pcb board: 30 pieces double sided pcb prototype boards in 4 different sizes, 10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards. Header connector: 10 pieces 40 pin male header, 10 pieces 40 pin female header; pitch: 2.

54mm, 10 pieces 40 pin pitch right angle male headers, single row and straight connector. Screw terminal block: 5 pieces 5. 08-301-2p and 5 pieces 5. 08-301-3p ; pitch: 5. 08mm, rated voltage: 300V, rated current: 16A.

More information about ELEGOO EL-CP-004 #ad


Similar products



uxcell 8mm OD 20mm Long Light Load Compression Mould Die Spring Yellow 10pcs

#ad
uxcell a15061600ux0355 #ad - Die springs are primarily used in die machinery. For die springs, yellow color here represents that the loading grade is light load. Additionally, brown die springs, green, blue, red, we want to tell you: in the yellow, YELLOW ones are the lightest load ones. However, because die springs are well suited for high stress applications, they are also suitable for a variety of other applications as well.

Faq: what is hole dia? what is rod dia?Hole Dia: The Diameter of the Hole on the Mold, i. E. The outer Diameter of the spring. Rod dia: the diameter of the Rod that is to be inserted into this spring, i. E. The inner Diameter of the spring. Jumper caps: 30 pieces standard 2. 54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color.

uxcell 8mm OD 20mm Long Light Load Compression Mould Die Spring Yellow 10pcs #ad - Free length : 20mm/08";material : Metal. Pcb board: 30 pieces double sided pcb prototype boards in 4 different sizes, 10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards. Header connector: 10 pieces 40 pin male header, 10 pieces 40 pin female header; pitch: 2. 54mm, 10 pieces 40 pin pitch right angle male headers, single row and straight connector.

More information about uxcell a15061600ux0355 #ad


Similar products



Elegoo MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino RoHS Compliant

#ad
ELEGOO AU-EL-CB-003 #ad - Net weight : 22g;package Content : 10 x Die Spring. This battery monitor can tolerate widest working voltage range DC 8-63V. Digital battery status indicator is suitable for 12v/24v/36V/48V lead acid battery and 3~15 cells lithium ion battery 8V-63V, meet your various application. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A.

Connect the black line to the negative, it will be work. Voltage and capacity percent meter can be applied to mobile and portable equipment in addition to smartphones and PCs, balance car, cleaning machine, such as universal auto, vehicle, skateboard, e-bike, instrument and so on. Input: dc 3 v to 40 v input voltage must be 1.

Elegoo MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino RoHS Compliant #ad - 5 v higher than the output voltage, no boost. Dc buck converter: input of 5. 5 to 32v dc and output of 1 to 27v dc,  such as step down 12v to 5v dc converter,  24v to 3. 7v/4. 2v/5v/6v/9v/12v dc voltage drop,  convert 18v solar panel output to 12 Volt input for a pond air pump.

Adjustable dc to dc converter: using a mini screwdriver to increase or decrease output voltage by adjusting the potentiometer screw,  clockwise to step up voltage and counterclockwise to step down voltage. Enclosed waterproof dc power converter: this unit is sealed,  anti-shock,  dust-proof,  all wires were solder connected and sealed in heatshrink tubing,  anti-humidity,  without any extra worries.

More information about ELEGOO AU-EL-CB-003 #ad


Similar products



ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino RoHS Compliant

#ad
ELEGOO AU-EL-CB-001 #ad - Rohs Compliant. Icstation battery voltage capacity tester can not only test the battery capacity percentage, but also the voltage value. Pcb board: 30 pieces double sided pcb prototype boards in 4 different sizes, 10 pieces 3*7cm, 10 pieces 2*8cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards. Header connector: 10 pieces 40 pin male header, 10 pieces 40 pin female header; pitch: 2.

54mm, 10 pieces 40 pin pitch right angle male headers, single row and straight connector. Screw terminal block: 5 pieces 5. 08-301-2p and 5 pieces 5. 08-301-3p ; pitch: 5. 08mm, rated voltage: 300V, rated current: 16A. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Faster transfer rates and more memory.

ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino RoHS Compliant #ad - Control using atmel ATMEGA328P chip. 100% compatible with the official version, for arduino uno R3. Lithium iron phosphate battery does not suitable. Auto battery tester moudle owns a high quality and clear LCD display, super bright backlight, check the battery status accurately and timely; one key touch button control the backlight and switch the capacity or voltage display.

Easy connection: this tester module provides a connector consists of plug, the plug to the socket of tester.

More information about ELEGOO AU-EL-CB-001 #ad


Similar products



Element14 Raspberry Pi 3 B+ Motherboard

#ad
Element14 Raspberry Pi 3 Model B+ #ad - Faster transfer rates and more memory. Control using atmel ATMEGA328P chip. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. The second one is a not connected pin, the IOREF that allow the shields to adapt to the voltage provided from the board. Dc buck converter: input of 5. 5 to 32v dc and output of 1 to 27v dc,  such as step down 12v to 5v dc converter,  24v to 3.

7v/4. 2v/5v/6v/9v/12v dc voltage drop,  convert 18v solar panel output to 12 Volt input for a pond air pump. Adjustable dc to dc converter: using a mini screwdriver to increase or decrease output voltage by adjusting the potentiometer screw,  clockwise to step up voltage and counterclockwise to step down voltage.

Element14 Raspberry Pi 3 B+ Motherboard #ad - Enclosed waterproof dc power converter: this unit is sealed,  all wires were solder connected and sealed in heatshrink tubing,  dust-proof,  anti-humidity,  anti-shock,  without any extra worries. Synchronous buck converter: SR synchronous rectification volt regulator, high conversion efficiency and low heating.

With over-current protection,  with over-heating protection. This brand new 1803bk dc motor speed controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated PWM DC voltage with a Duty Cycle fully the product adjust from 0%-100%. With a self-recovery fuse 2A and a Power-On LED light.

Enable to provide a continuous current of 2A to your DC motor or other DC load.

More information about Element14 Raspberry Pi 3 Model B+ #ad


Similar products