for 24V 36V 48V Lead-Acid AGM Gel Flood Battery Battery Extend Battery Life 1 Year and More HA01 – PowMr Battery Equalizer Voltage Balancer

#ad
PowMr #ad - It can be connected for long periods for automatically battery state of equilibrium. This equalizing battery charger is suitable forLead-acid BatteriesVRLA It starts work when the voltage higher than 2. 4v, it means that this equalier can be used in a single cell battery range from 2. 4v to 12V. This 24v battery equalizer extend battery life + 1 year or morespecialized for keep up the voltage balance of batteries connected in series during the Charging and Discharging process, due to differences in the chemical composition and temperature of the battery cell that connected in series, it could make a battery excessive charge or discharge, because there are differences, It causes two battery charge and discharge differences even the battery is idle, also due to the different levels of self-discharge could lead to an imbalance between serially connected battery at charging process, and the other one insufficient charging or discharging.

This battery equalizer can compensate both parties when the battery are connected in series as voltage difference exceeds 10 mV, then the battery equalization starts to work, Final achieved balance of the batteries set. The equalizer is not affected with battery connection way,  no matter in series or in parallel, both can work.

for 24V 36V 48V Lead-Acid AGM Gel Flood Battery Battery Extend Battery Life 1 Year and More HA01 - PowMr Battery Equalizer Voltage Balancer #ad - Specificattion: battery nominal voltage / 2×12VOptimizing current / 0-5A Quiescent current. One equalizer can connect 4 batteries once a time, the extra cable can be vacant positive and negative terminal should be avoided, if battery less than the 4, does not affect the equilibrium effects.

More information about PowMr #ad

BougeRV MC4 Connectors Y Branch 1 to 4 Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel(1, M/FFFF and F/MMMM)

#ad
BougeRV ISE030 #ad - With excellent aging resistance and UV endurance. Load capability with big current and high voltage. Bougerv promise 18 months warranty and lifetime warmhearted service to assure your long term enjoyment why bougerv? far longer than others, more convenient to connect in multiple panels Double seal rings for better waterproof effect It can be used in harsh environment With excellent aging resistance and UV endurance Created seal, design of dust proof Load capability with big current and high voltage Strong pulling force capability Resistance of extra high & low temperature and fireproof Lower contact resistance Specification: Insulation material:TPE PPO Rated Current: 30A Rated voltage: 1000VDC Contact resistance: ≤0

2mmΩ waterproof degree:ip67 flame class: ul94-vo safety class: Ⅱ withdrawal force: ≥50N Insertion force: ≤50N Connecting system: crimping connection Temperature range: -40 ℃ ~ +90 ℃ Wire Size:1. 5-6mm² weight: 0385kg / 13. 6 oz package size: 40 x 21 x 4 cm / 15. 75 x 8. 27 x 1. 57 inch package includes: 1 pair of y type 1 to 4 mc4 connectorsmale & Female Y branch mc4 parallel connector 1 male to 4 femaleM/FFFF and 1 female to 4 maleF/MMMM.

BougeRV MC4 Connectors Y Branch 1 to 4 Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel(1, M/FFFF and F/MMMM) #ad - Double seal rings for better waterproof effect. It can be used in harsh environment, it will survived rain, high force winds and snow.

More information about BougeRV ISE030 #ad


Similar products



MakerFocus 5pcs Mini Digital DC Voltmeter 0.28 Inch Two-Wire 2.5V-30V Mini Digital DC Voltmeter Voltage Tester Meter 5 Colours

#ad
MakerFocus #ad - 5pcs mini digital DC Voltmeter 028 inch two-Wire 2. 5v-30v mini digital dc voltmeter voltage Tester Meter 5 ColoursFeatures:Detection voltage: DC 2. 4v ~ 30vworking current:.

More information about MakerFocus #ad


Similar products



Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

#ad
TOOL-MC4 TOOL-MC4 #ad - Compatible with PV cables with different insulation diameters. Detecting voltage: dc 2. 4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. Load capability with big current and high voltage. Y branch mc4 parallel connector 1 male to 4 femaleM/FFFF and 1 female to 4 maleF/MMMM. Created seal, design of dust proof.

With excellent aging resistance and UV endurance. It can be used in harsh environment, it will survived rain, high force winds and snow. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors.

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors #ad - Double seal rings for better waterproof effect. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Resistance of extra high & low temperature and fireproof.

More information about TOOL-MC4 TOOL-MC4 #ad


Similar products



Extech 480172 AC Line Splitter

#ad
Extech 480172 #ad - Load capability with big current and high voltage. This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter. Double seal rings for better waterproof effect. Extech 480172 ac line splitter, provides easy and safe measurements of current without the need to cut off the Plug and Separate the Conductors, Voltage Check Function This Extech 480172 Line Splitter provides a fast and easy way to "open" standard 120 Volt AC electrical lines, eliminating the need to cut off the plug and separate the conductors.

Created seal, design of dust proof. It can be used in harsh environment, it will survived rain, high force winds and snow. Resistance of extra high & low temperature and fireproof. Detecting voltage: dc 2. 4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. When connected between a 120 volt ac outlet and a device under test, this splitter separates the hot/live conductor from the neutral and ground, which enables users to measure AC current up to 15 Amp on a two-wire or three-wire lines using a clamp meter.

Extech 480172 AC Line Splitter #ad - With excellent aging resistance and UV endurance. Key features provides easy and safe measurements of current without the need to cut off the plug and separate the conductors Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral and ground Voltage check function Two clamp positions: x1 for direct readings, x10 for actual reading multiplied by 10 Specifications Dimensions: 5.

25"x2"x1" 133x51x25mm Weight: 5.

More information about Extech 480172 #ad


Similar products



Findyouled 20 Pairs MC4 Male/Female Solar Panel Cable Connectors

#ad
findyouled MC4-0116 #ad - Y branch mc4 parallel connector 1 male to 4 femaleM/FFFF and 1 female to 4 maleF/MMMM. Detecting voltage: dc 2. 4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. With excellent aging resistance and UV endurance. Compatible with PV cables with different insulation diameters. Resistance of extra high & low temperature and fireproof.

Created seal, design of dust proof. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. It can be used in harsh environment, it will survived rain, high force winds and snow. Load capability with big current and high voltage. Double seal rings for better waterproof effect.

More information about findyouled MC4-0116 #ad


Similar products



ScanTool OBDLink LX Bluetooth: Professional Grade OBD-II Automotive Scan Tool for Windows and Android – DIY Car and Truck Data and Diagnostics

#ad
ScanTool 427201 #ad - It also supports eobd, jobd, and all other international variants of OBD-II. The ergonomically designed device comes in frustration-free packaging, and takes an average of 3 minutes to install. Works on a wider range of vehicles - obdlink's advanced algorithm enables LX to connect to more OBD-II compliant makes & models than any other scan tool.

Created seal, design of dust proof. Hacker-proof - utilises a unique multi-layered link security mechanism, eliminating the risk of unauthorized access. Obdlink lx is an easy-to-use, laptop, inexpensive, lightning-fast Bluetooth OBD-II adapter that can turn your Android or Windows smart phone, or PC into a sophisticated diagnostic scan tool, tablet, trip computer, hacker-proof, and real-time performance monitor.

ScanTool OBDLink LX Bluetooth: Professional Grade OBD-II Automotive Scan Tool for Windows and Android – DIY Car and Truck Data and Diagnostics #ad - Load capability with big current and high voltage. Detecting voltage: dc 2. 4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. Read & clear check engine light - Check diagnostic codes yourself and make informed repair decisions. Key features: up to 4x faster than the closest competitor - LX accelerates apps and software up to 400%.

Resistance of extra high & low temperature and fireproof. With excellent aging resistance and UV endurance.

More information about ScanTool 427201 #ad


Similar products



Renogy 4 Sets of Solar Panel Mounting Z Brackets for RV, Boat, Wall and Other Off Gird Roof Installation, 4 Pack

#ad
Renogy 4 Sets of Renogy Solar Panel Mounting Z #ad - It is also suited as attachment to a user made structure such as a wooden frame. This system makes the installation of small solar systems easy, affordable and quick. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. Resistance of extra high & low temperature and fireproof.

Double seal rings for better waterproof effect. Load capability with big current and high voltage. With excellent aging resistance and UV endurance. Compatible with PV cables with different insulation diameters. Detecting voltage: dc 2. 4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument.

Renogy 4 Sets of Solar Panel Mounting Z Brackets for RV, Boat, Wall and Other Off Gird Roof Installation, 4 Pack #ad - The renogy z-bracket mount system is designed to support the installation of single solar panel units, generally in off-grid installations. It can be used in harsh environment, it will survived rain, high force winds and snow. The system comes complete with all fasteners to secure the system to the installation surface.

Created seal, design of dust proof. Y branch mc4 parallel connector 1 male to 4 femaleM/FFFF and 1 female to 4 maleF/MMMM.

More information about Renogy 4 Sets of Renogy Solar Panel Mounting Z #ad


Similar products