Camco 47484 Red 3/8″ Stud 24″ Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47484 #ad - Ul 1426 listed and manufactured to the highest ABYC standards. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Heat resistant up to 105C dry. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. 2 awg wire, fits 3/8" stud. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's 24" 2 awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Camco 47484 Red 3/8" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Camco 47484 #ad

Camco 47474 Black 5/16" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47474 #ad - 2 awg wire, fits 5/16" stud. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Camco's 24" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Camco 47474 Black 5/16" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Ul 1426 listed and manufactured to the highest ABYC standards.

More information about Camco 47474 #ad


Similar products



Camco 47473 Black 5/16" Stud 12" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47473 #ad - Heat resistant up to 105C dry. 2 awg wire, fits 5/16" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ul 1426 listed and manufactured to the highest ABYC standards. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

Heat resistant up to 105C dry. 2 awg wire, fits 5/16" stud. Camco's 12" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Camco 47473 Black 5/16" Stud 12" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Heat-resistant up to 105C dry and available in black, red, and yellow. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Camco 47473 #ad


Similar products



Seachoice Seachoice Battery Selector Switch

#ad
Seachoice 11501 #ad - For systems under 50V. Ignition protected. The product is manufactured in United States. For use with two or more batteries and systems under 50V. 250a continuous/360A intermittent. Ul 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Height: 2-5/8". Diameter: 5-1/4". Ul 1426 listed and manufactured to the highest ABYC standards. 2 awg wire, fits 5/16" stud. Permits selection between batteries for starting, charging or operation in parallel. Permits selection between batteries for starting and charging or operation of both in parallel. Size: 5-1/4 inch x 2-5/8 inch.

Seachoice Seachoice Battery Selector Switch #ad - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat resistant up to 105C dry. Capacity: 250a continuous, 360A intermittent. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ul listed, ignition protected and CE approved. For use with 2 or more batteries.

More information about Seachoice 11501 #ad


Similar products



Perko 8501DP Battery Selector Switches

#ad
Perko 8501DP #ad - For use with two or more batteries and single or dual engine systems. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Built with quality materials. 2 awg wire, fits 5/16" stud. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Size: 5-1/4 inch x 2-5/8 inch.

Capacity - 250 amps continuous, 360 AMPS Intermittent. 2 awg wire, fits 5/16" stud. Heat resistant up to 105C dry. Use two switches for dual engine systems. When used with non-unitized alternators, these models will interrupt the field current reducing the possibility of damage if turned "OFF" with the engine running.

Perko 8501DP Battery Selector Switches #ad - Ignition Protected. They permit selection between batteries for starting and charging or operation of both batteries in parallel. Ul 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry. Capacity: 250 amps continuous, 360 Amps Intermittent. Capacity: 250a continuous, 360A intermittent.

2-5/8" depth.

More information about Perko 8501DP #ad


Similar products



Perko 9601DP Battery Disconnect Switch

#ad
Perko 9601DP #ad - Size: 5-1/4 inch x 2-5/8 inch. 2 awg wire, fits 5/16" stud. Ul 1426 listed and manufactured to the highest ABYC standards. Easy Installation. Ignition Protected. Capacity: 250a continuous, 360A intermittent. Ignition Protected. Heat resistant up to 105C dry. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Capacity - 250 amps continuous, 360 AMPS Intermittent. For use with 12, 24 and 32 Volt Marine Electrical Systems. Their traditional Perko bolt circle makes for easy installation. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Built with quality materials. Ul 1426 listed and manufactured to the highest ABYC standards.

Perko 9601DP Battery Disconnect Switch #ad - These switches can be mounted in numerous locations. For use with two or more batteries and systems under 50V. 2 awg wire, fits 5/16" stud. Ul listed, ignition protected and CE approved. Perko's 9601 series battery On-Off switches are among the most popular battery switches ever produced. Permits selection between batteries for starting, charging or operation in parallel.

More information about Perko 9601DP #ad


Similar products



Blue Sea 9001E E-Series Battery Switch

#ad
Acr Electronics 9001E-BSS #ad - Capacity: 250a continuous, 360A intermittent. Accepts up to 4/0 AWG battery cables. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ip66 waterproof, iso 8846 and meets ABYC requirements. Up to 350 amperes continuous Rating Ignition protected - safe for installation aboard gasoline powered boats.

Heat resistant up to 105C dry. For use with two or more batteries and systems under 50V. Selector 4 position. Permits selection between batteries for starting, charging or operation in parallel. Ul 1426 listed and manufactured to the highest ABYC standards. Switches battery bank 1 or battery bank 2 or battery banks 1 and 2 to all loads using one switch.

Blue Sea 9001E E-Series Battery Switch #ad - Terminal stud size: 3/8" - 16. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Blue sea systems E-Series Battery Switches. Ul listed, ignition protected and CE approved. Switches isolated battery banks to all loads or combines battery banks to all loads. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about Acr Electronics 9001E-BSS #ad


Similar products



SEAFLO 12V/24V/48V Battery Disconnect Switch Isolator Switch for Marine, Boat, Car, RV, and ATV Vehicles On/Off

#ad
SEAFLO SG_B00EBQOKEQ_US #ad - Ip66 waterproof, iso 8846 and meets ABYC requirements. Polycarbonate Body with Brass Terminals. Size: 5-1/4 inch x 2-5/8 inch. Our brand new design adds 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance. Disconnects the battery safely, sleek modern appearance, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sturdy and durable.

Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position. 2 awg wire, fits 5/16" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Capacity - 250 amps continuous, 360 AMPS Intermittent.

SEAFLO 12V/24V/48V Battery Disconnect Switch Isolator Switch for Marine, Boat, Car, RV, and ATV Vehicles On/Off #ad - 2. 85" x 2. 85" x 2. 9"weight: 7 oz 02kg 2 awg wire, fits 5/16" stud. Ignition Protected. Ul listed, ignition protected and CE approved.

More information about SEAFLO SG_B00EBQOKEQ_US #ad


Similar products



Blue Sea Systems 7650 Add-A-Battery Kit

#ad
Blue Sea Systems 7650-BSS #ad - Ignition Protected. The add-a-battery offers a simple way to control the charging and battery switching of two battery banks. Switches isolated battery banks to all loads or combines battery banks to all loads. Ignition Protected. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Capacity: 250a continuous, 360A intermittent.

Blue sea systems popular add-A-Battery kit was primarily designed for boats with alternator output of 120A or less. Heat resistant up to 105C dry. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Simplifies switching. Capacity - 250 amps continuous, 360 AMPS Intermittent. Size: 5-1/4 inch x 2-5/8 inch.

Blue Sea Systems 7650 Add-A-Battery Kit #ad - Ul 1426 listed and manufactured to the highest ABYC standards. Ignition protected-safe for installation aboard gasoline powered boats. Adding a second battery to the electrical system prevents the unintended discharge of the engine start battery. 2-position: oN and OFF positions. Permits selection between batteries for starting, charging or operation in parallel.

More information about Blue Sea Systems 7650-BSS #ad


Similar products



Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red

#ad
Acr Electronics 6006 #ad - Permits selection between batteries for starting, charging or operation in parallel. Continuous rating: 300A, Maximum Voltage: 48V DC. Can be used with 8v up to 50V DC systems to isolate and secure the electrical system. Extra heavy duty - rated at 1250 amps momentary, 275 Amps continuous @ 12V DC. Switches a single battery to a single load group.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Single circuit on-off. Built with quality materials. Capacity: 250a continuous, 360A intermittent. Isolates batteries during engine cranking and when not charging. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red #ad - Ignition Protected. For use with 12, 24 and 32 Volt Marine Electrical Systems. Includes e-series dual circuit plus battery switch PN 5511E. Heat resistant up to 105C dry. Easy Installation. For use with two or more batteries and systems under 50V. Ul 1426 listed and manufactured to the highest ABYC standards.

More information about Acr Electronics 6006 #ad


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Red, 100 Feet, 14 AWG

#ad
Ancor 104810 #ad - 12/24 volt dc 120 amp automatic charging relay PN 7610 automatically combines batteries during charging. Isolates batteries during engine cranking and when not charging. Single circuit on-off. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Continuous rating: 300A, Maximum Voltage: 48V DC.

Ignition Protected. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Capacity: 250a continuous, 360A intermittent. Size: 5-1/4 inch x 2-5/8 inch. Isolates engine and house circuits. Combines batteries for emergency starting. Heat resistant up to 105C dry. Ignition protected-safe for installation aboard gasoline powered boats.

Ancor Marine Grade Primary Wire and Battery Cable Red, 100 Feet, 14 AWG #ad - Heat resistant up to 105C dry. Switches isolated battery banks to all loads or combines battery banks to all loads. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Polycarbonate Body with Brass Terminals.

Built with quality materials.

More information about Ancor 104810 #ad


Similar products