Camco 47473 Black 5/16″ Stud 12″ Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47473 #ad - Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. 2 awg wire, fits 5/16" stud. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Heat resistant up to 105C dry. Ul 1426 listed and manufactured to the highest ABYC standards. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's 12" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about Camco 47473 #ad

Camco 47483 Red 3/8" Stud 12" Long 2-Gauge Marine Battery Cable and Tinned Lug Assembly

#ad
Camco 47483 #ad - Heat resistant up to 105C dry. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. 2 awg wire, fits 3/8" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ul 1426 listed and manufactured to the highest ABYC standards. Camco's 12" 2 awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

More information about Camco 47483 #ad


Similar products



NOCO HM426 Dual 6-Volt Commercial Grade Battery Box for Automotive, Marine and RV Batteries

#ad
NOCO HM426 #ad - The noco commercial Battery Box is designed for 6 volt batteries. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. 2 awg wire, fits 3/8" stud. Commercial grade battery box for Automotive, Marine, RV and more; Designed for dual 6-volt batteries. Ul 1426 listed and manufactured to the highest ABYC standards.

Certified and tested; meets united states coast guard uscG Code of Federal Regulations 183. 420 and american boat and Yacht Council ABYC E-107 specifications. Resistant to UV exposure. Maintain their tough impact properties in climates down to -40 degrees Fahrenheit. Heat resistant up to 105C dry. Meets uscg code of Federal Regulations 183.

NOCO HM426 Dual 6-Volt Commercial Grade Battery Box for Automotive, Marine and RV Batteries #ad - 420 and abyc e-107 specification. These commercial battery boxes are rotationally molded from the highest quality, low density polyethylene plastic. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Rugged design for commercial applications; Four corner fastening system and captive lid for easy installations, full flow ventilation for releasing battery gases, large cable entry holes for large gauge cables, and large battery acid reservoir.

Designed for rugged environments; impact resistant down to minus 40 degrees Fahrenheit, oil and other contaminants, withstands acid, gas, and immune to UV exposure.

More information about NOCO HM426 #ad


Similar products



Cllena Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat Rv ATV Vehicles

#ad
Cllena #ad - Commercial grade battery box for Automotive, Marine, RV and more; Designed for dual 6-volt batteries. Rugged design for commercial applications; Four corner fastening system and captive lid for easy installations, full flow ventilation for releasing battery gases, large cable entry holes for large gauge cables, and large battery acid reservoir.

Designed for rugged environments; impact resistant down to minus 40 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure. Keeps your battery safe; limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals.

Cllena Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat Rv ATV Vehicles #ad - Ships in certified Frustration-Free Packaging. Specification: voltage: 12v rated current: 200A Max Current: 500A for 5 seconds Round disk diameter: 2. 36'' 60mm feet Spacing: 1. 35'' 34. 5mm height: 2. 99'' 76mm no key Overall height: 4. 25'' 108mm with key package included: 1 x battery switch 1 x Key 1 x Waterproof cover 2 awg wire, fits 3/8" stud.

Max. Ul 1426 listed and manufactured to the highest ABYC standards.

More information about Cllena #ad


Similar products



Camco 47484 Red 3/8" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47484 #ad - 2 awg wire, fits 3/8" stud. Certified and tested; meets united states coast guard uscG Code of Federal Regulations 183. 420 and american boat and Yacht Council ABYC E-107 specifications. 2 awg wire, fits 3/8" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Rugged design for commercial applications; Four corner fastening system and captive lid for easy installations, full flow ventilation for releasing battery gases, large cable entry holes for large gauge cables, and large battery acid reservoir.

Designed for rugged environments; impact resistant down to minus 40 degrees Fahrenheit, oil and other contaminants, gas, withstands acid, and immune to UV exposure. Keeps your battery safe; limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals.

Camco 47484 Red 3/8" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Ships in certified Frustration-Free Packaging. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

Ul 1426 listed and manufactured to the highest ABYC standards. Rust and corrosion resistant, Solid brass nuts and washers.

More information about Camco 47484 #ad


Similar products



Zoostliss Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat RV ATV Vehicles

#ad
PF #ad - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Rust and corrosion resistant, Solid brass nuts and washers. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ul 1426 listed and manufactured to the highest ABYC standards. Waterproof cover can better protect key hole.

Heat resistant up to 105C dry. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Waterproof cover can better protect key hole. Brand new and high-quality switch. Ul 1426 listed and manufactured to the highest ABYC standards. Rust and corrosion resistant, Solid brass nuts and washers.

Zoostliss Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat RV ATV Vehicles #ad - Easy to install & Simple To Use, 2 Keys. Rugged design for commercial applications; Four corner fastening system and captive lid for easy installations, full flow ventilation for releasing battery gases, large cable entry holes for large gauge cables, and large battery acid reservoir. Designed for rugged environments; impact resistant down to minus 40 degrees Fahrenheit, oil and other contaminants, withstands acid, gas, and immune to UV exposure.

Keeps your battery safe; limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals. Ships in certified Frustration-Free Packaging.

More information about PF #ad


Similar products



Battery Disconnect Switch with Key

#ad
Moeller Marine Products 042219-10 #ad - Max. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Conveniently places on/off switch on bulkhead 110 amp at 12 V for 10 seconds Key & cover have environment-proof boot to reduce corrosion Prevents battery discharge and unauthorized use 2 awg wire, fits 3/8" stud. Easy to install & Simple To Use.

2 awg wire, fits 3/8" stud. Commercial grade battery box for Automotive, Marine, RV and more; Designed for dual 6-volt batteries. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Withstanding current: 12V 500A. Waterproof cover can better protect key hole. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Battery Disconnect Switch with Key #ad - Rust and corrosion resistant, Solid brass nuts and washers. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Certified and tested; meets united states coast guard uscG Code of Federal Regulations 183. 420 and american boat and Yacht Council ABYC E-107 specifications. Max.

More information about Moeller Marine Products 042219-10 #ad


Similar products



Cllena Battery Isolator Disconnect Cut Off Power Kill Switch for Car Boat Rv ATV

#ad
Cllena #ad - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Specification: material: plastic + Copper Color:Red + Black Base:43 x 37 x 64mm/1. 69 x 1. 46 x 2. 52"l x w x h stud: 6mm rated current: 300arated voltage: 60v dc electrical life: 9999 Weight:50g Package Include: 1 x Battery Disconnect Switch Feature: Small size, sturdy and durable.

Brand new and high-quality switch. Withstanding current: 12V 500A. Rust and corrosion resistant, Solid brass nuts and washers. Waterproof cover can better protect key hole. Waterproof cover can better protect key hole. Heat resistant up to 105C dry. Package included: 1 x battery switch + 2 x Key + 1 x Waterproof cover.

Cllena Battery Isolator Disconnect Cut Off Power Kill Switch for Car Boat Rv ATV #ad - Ul 1426 listed and manufactured to the highest ABYC standards. Easy to install & Simple To Use. Moeller 04221910, moe042219102 awg wire, fits 3/8" stud. Rust and corrosion resistant, Solid brass nuts and washers. Note: please check the picture and size carefully before purchase! 2 awg wire, fits 3/8" stud.

More information about Cllena #ad


Similar products



BEP 701 Battery Switches - On-Off

#ad
BEP 701 #ad - 2 awg wire, fits 3/8" stud. Withstanding current: 12V 500A. The rear cover insulating the rear terminals against any short circuits. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Commercial grade battery box for Automotive, Marine, RV and more; Designed for dual 6-volt batteries.

The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature. This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715. Rust and corrosion resistant, Solid brass nuts and washers.

Max. Operation: on/off, 1250a dc cranking 10 sec, voltage: 48v dc, 455a dC Intermittent 5 min, rating: 275a dc continuous 1hr, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Rugged design for commercial applications; Four corner fastening system and captive lid for easy installations, large cable entry holes for large gauge cables, full flow ventilation for releasing battery gases, and large battery acid reservoir.

BEP 701 Battery Switches - On-Off #ad - Designed for rugged environments; impact resistant down to minus 40 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure. Keeps your battery safe; limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals.

Ships in certified Frustration-Free Packaging.

More information about BEP 701 #ad


Similar products



NOCO Black HM306BKS Single 6V Snap-Top Box for Automotive, Marine, and RV Batteries

#ad
NOCO HM306BK #ad - Control knob can be removed by switching to counter-clockwise 45° position. Easy to install & Simple To Use, 2 Keys. Its designed to limit battery movement and protect against accidental shorting of battery terminals, as well as, collect battery acid and allow adequate ventilation. It features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation.

Waterproof cover can better protect key hole. Moeller 04221910, moe04221910 Ul 1426 listed and manufactured to the highest ABYC standards. Withstanding current: 12V 500A. 2 awg wire, fits 3/8" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Certified and tested; meets united states coast guard uscG Code of Federal Regulations 183.

NOCO Black HM306BKS Single 6V Snap-Top Box for Automotive, Marine, and RV Batteries #ad - 420 and american boat and Yacht Council ABYC E-107 specifications. Package included: 1 x battery switch + 2 x Key + 1 x Waterproof cover. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. This ensures the switch meets ABYC requirements.

More information about NOCO HM306BK #ad


Similar products



1 X Marine Boat Battery Power Disconnect Switch, Heavy Duty Battery Isolator Switch

#ad
seaflo #ad - Commercial grade battery box for Automotive, Marine, RV and more; Designed for dual 6-volt batteries. Can be used with 8v up to 50V DC systems to isolate and secure the electrical system. 2 awg wire, fits 3/8" stud. Package included: 1 x battery switch + 2 x Key + 1 x Waterproof cover. Max. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Rust and corrosion resistant, Solid brass nuts and washers. Rugged design for commercial applications; Four corner fastening system and captive lid for easy installations, large cable entry holes for large gauge cables, full flow ventilation for releasing battery gases, and large battery acid reservoir.

Designed for rugged environments; impact resistant down to minus 40 degrees Fahrenheit, withstands acid, oil and other contaminants, gas, and immune to UV exposure. Keeps your battery safe; limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals.

1 X Marine Boat Battery Power Disconnect Switch, Heavy Duty Battery Isolator Switch #ad - Ships in certified Frustration-Free Packaging. Rust and corrosion resistant, Solid brass nuts and washers. Ul 1426 listed and manufactured to the highest ABYC standards. Brand new and high-quality switch, Easy To Install & Simple To Use. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about seaflo #ad


Similar products