Camco 47471 Black 5/16″ Stud 32″ Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47471 - Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Heat resistant up to 105C dry. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Camco's 32" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. 2 awg wire, fits 5/16" stud.

Camco 47471 Black 5/16" Stud 32" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned - Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about Camco 47471

Camco 47483 Red 3/8" Stud 12" Long 2-Gauge Marine Battery Cable and Tinned Lug Assembly

Camco 47483 - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Heat resistant up to 105C dry. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

Ul 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Camco's 12" 2 awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. 2 awg wire, fits 3/8" stud.

More information about Camco 47483


Similar products



Camco 47484 Red 3/8" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47484 - Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Heat resistant up to 105C dry. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. 2 awg wire, fits 3/8" stud. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ul 1426 listed and manufactured to the highest ABYC standards. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

Camco 47484 Red 3/8" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned - . 2 awg wire, fits 3/8" stud. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's 24" 2 awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry.

More information about Camco 47484


Similar products



Perko 8501DP Battery Selector Switches

Perko 8501DP - Ul 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry. Capacity: 250 amps continuous, 360 Amps Intermittent. For use with 12, 24 and 32 Volt Marine Electrical Systems. They permit selection between batteries for starting and charging or operation of both batteries in parallel.

2 awg wire, fits 3/8" stud. When used with non-unitized alternators, these models will interrupt the field current reducing the possibility of damage if turned "OFF" with the engine running. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ignition Protected. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Perko 8501DP Battery Selector Switches - 2 awg wire, fits 3/8" stud. For use with two or more batteries and single or dual engine systems. Built with quality materials. Heat resistant up to 105C dry. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. For use with systems under 50 volts. Use two switches for dual engine systems.

Capacity - 250 amps continuous, 360 AMPS Intermittent.

More information about Perko 8501DP


Similar products



Camco 47482 Red 3/8" Stud 48" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47482 - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Built with quality materials. 2 awg wire, fits 3/8" stud. Heat-resistant up to 105C dry and available in black, red, and yellow. Ul 1426 listed and manufactured to the highest ABYC standards. 2 awg wire, fits 3/8" stud. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

For use with 12, 24 and 32 Volt Marine Electrical Systems. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat resistant up to 105C dry. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Heat resistant up to 105C dry. Heat resistant up to 105C dry.

Camco 47482 Red 3/8" Stud 48" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned - Ignition Protected. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Camco's 48" 2 awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

More information about Camco 47482


Similar products



ABN Marine Battery Cable & Tinned Lug 2’ Foot in Red, 3/8" Inch Stud, 2-Gauge – for Cars, Trucks, Boats, Golf Carts

ABN - Capacity - 250 amps continuous, 360 AMPS Intermittent. Ul 1426 listed and manufactured to the highest ABYC standards. Replace your positive battery line: the abn 2-foot battery cables 2 gauge battery wire is a positive battery cable replacement that can be used as a jumper cable between 2 golf cart batteries, starter cable on your boat motor, to install a dual battery system in your pickup truck, to connect 2 golf cart batteries for a camping trailer, or to install a battery disconnect switch on your RV.

Fits your application: this car battery cable is primarily used for cars and pickup trucks but is also compatible with campers, boats, RV battery cable, and golf carts; Use as a car battery wire, lawn mowers, marine battery cable, lawn mower battery cable, and more. Built to last: constructed from pvc insulated copper with zinc-plated steel lug that is tinned to resist corrosion from grease, and gasoline while the mechanical precision crimp ensures a solid connection; Waterproof adhesive-lined shrink wrap on the connections offer secure fit; 2-gauge thickness that will not easily melt like thin, unreliable cords To prevent prolonged contact, oil, we recommend further protecting the inverter cable with loom covering - not included.

ABN Marine Battery Cable & Tinned Lug 2’ Foot in Red, 3/8" Inch Stud, 2-Gauge – for Cars, Trucks, Boats, Golf Carts - Get more flexibility: battery terminal cable remains easy to bend in any environment and stretches to a 2-foot 06m maximum length without causing damage to the battery terminal wire or your application. Heat resistant up to 105C dry. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm.

When you need to replace the positive battery line on your vehicle, use the ABN 2-Foot Power Inverter Cables 2 Gauge Battery Cable Wire.

More information about ABN


Similar products



BEP 701 Battery Switches - On-Off

BEP 701 - Perfect size: 2 gauge battery cable has a 17/64-inch 6. 7mm thickness, 24-inch 61cm length, and 3/8-inch 10mm zinc-plated lug stud; 760W rating; UL 1426 listed; Club car 7295 EZ Go 11888-G2 14610-G1. Ignition Protected. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Capacity - 250 amps continuous, 360 AMPS Intermittent. Three removable side plates provide access of up to 1/0 cables. Heat resistant up to 105C dry. The continuous and intermittent ratings are tested at 110% of specified ratings. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Tin-plated copper studs and nuts.

BEP 701 Battery Switches - On-Off - Heat resistant up to 105C dry. All bep switches are tested Independently to this specification by a 3rd party laboratory. Ul 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. 2 awg wire, fits 3/8" stud. Built with quality materials.

More information about BEP 701


Similar products



Fastronix Top Post Military Spec Battery Terminal and Cover Kit

Fastronix Solutions - Tin-plated copper studs and nuts. Simply replace the worn out terminal with the new one and attach the battery cables to the new terminals with a 3/8" bolt. This ensures the switch meets ABYC requirements. Heat resistant up to 105C dry. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Replace your positive battery line: the abn 2-foot battery cables 2 gauge battery wire is a positive battery cable replacement that can be used as a jumper cable between 2 golf cart batteries, to connect 2 golf cart batteries for a camping trailer, starter cable on your boat motor, to install a dual battery system in your pickup truck, or to install a battery disconnect switch on your RV.

Fastronix Top Post Military Spec Battery Terminal and Cover Kit - Fits your application: this car battery cable is primarily used for cars and pickup trucks but is also compatible with campers, and golf carts; Use as a car battery wire, lawn mowers, marine battery cable, lawn mower battery cable, boats, RV battery cable, and more. Built to last: constructed from pvc insulated copper with zinc-plated steel lug that is tinned to resist corrosion from grease, unreliable cords To prevent prolonged contact, oil, and gasoline while the mechanical precision crimp ensures a solid connection; Waterproof adhesive-lined shrink wrap on the connections offer secure fit; 2-gauge thickness that will not easily melt like thin, we recommend further protecting the inverter cable with loom covering - not included.

Get more flexibility: battery terminal cable remains easy to bend in any environment and stretches to a 2-foot 06m maximum length without causing damage to the battery terminal wire or your application. Perfect size: 2 gauge battery cable has a 17/64-inch 6.

More information about Fastronix Solutions


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

Blue Sea Systems 2300 - Use to replace worn Out or Corroded Battery Terminals and Covers. 1 positive and 1 negative lead Battery Terminals and 1 Set of Durable Military Battery Terminal Covers. 150a common busbar with 10 screws and a cover. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Perfect size: 2 gauge battery cable has a 17/64-inch 6.

7mm thickness, 24-inch 61cm length, and 3/8-inch 10mm zinc-plated lug stud; 760W rating; UL 1426 listed; Club car 7295 EZ Go 11888-G2 14610-G1. Ul 1426 listed and manufactured to the highest ABYC standards. For use with 12, 24 and 32 Volt Marine Electrical Systems. Ignition protected. Max voltage: 300v aC/ 48V DC.

Blue Sea Systems Common 150A 10-Gang BusBar with Cover - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Control knob can be removed by switching to counter-clockwise 45° position. Operation: on/off, voltage: 48v dc, 1250a dc cranking 10 sec, rating: 275A DC Continuous 1hr, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact. Heat resistant up to 105C dry.

More information about Blue Sea Systems 2300


Similar products



Camco 47485 Red 3/8" Stud 36" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47485 - This ensures the switch meets ABYC requirements. Ignition Protected. 150a common busbar with 10 screws and a cover. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ul 1426 listed and manufactured to the highest ABYC standards.

Camco 47485 Red 3/8" Stud 36" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned - 2 awg wire, fits 3/8" stud. 2 awg wire, fits 3/8" stud. Capacity - 250 amps continuous, 360 AMPS Intermittent. Heat resistant up to 105C dry. Each terminal can Hold Multiple Battery Cable Leads. Ul 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry. Max voltage: 300v aC/ 48V DC.

Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

More information about Camco 47485


Similar products



Camco 47450 Red 3/8" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47450 - Use to replace worn Out or Corroded Battery Terminals and Covers. Ul 1426 listed and manufactured to the highest ABYC standards. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. For use with 12, 24 and 32 Volt Marine Electrical Systems. Built with quality materials. Heat resistant up to 105C dry.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin-plated copper studs and nuts. 2 awg wire, fits 3/8" stud. 150a common busbar with 10 screws and a cover. Replace your positive battery line: the abn 2-foot battery cables 2 gauge battery wire is a positive battery cable replacement that can be used as a jumper cable between 2 golf cart batteries, to install a dual battery system in your pickup truck, to connect 2 golf cart batteries for a camping trailer, starter cable on your boat motor, or to install a battery disconnect switch on your RV.

Camco 47450 Red 3/8" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned - Fits your application: this car battery cable is primarily used for cars and pickup trucks but is also compatible with campers, RV battery cable, lawn mowers, marine battery cable, boats, lawn mower battery cable, and golf carts; Use as a car battery wire, and more. Built to last: constructed from pvc insulated copper with zinc-plated steel lug that is tinned to resist corrosion from grease, and gasoline while the mechanical precision crimp ensures a solid connection; Waterproof adhesive-lined shrink wrap on the connections offer secure fit; 2-gauge thickness that will not easily melt like thin, oil, unreliable cords To prevent prolonged contact, we recommend further protecting the inverter cable with loom covering - not included.

Get more flexibility: battery terminal cable remains easy to bend in any environment and stretches to a 2-foot 06m maximum length without causing damage to the battery terminal wire or your application.

More information about Camco 47450


Similar products