Camco 47470 Black 5/16″ Stud 18″ Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47470 #ad - 2 awg wire, fits 5/16" stud. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ul 1426 listed and manufactured to the highest ABYC standards. Camco's 18" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Heat resistant up to 105C dry. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Camco 47470 #ad

NOCO Black HM306BKS Single 6V Snap-Top Box for Automotive, Marine, and RV Batteries

#ad
NOCO HM306BK #ad - It features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries. Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation.

Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, gas, and unaffected by acid, as well as, oil, UV exposure. Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation.

Certified and tested to meet united states coast guard uscg code of Federal Regulations 183. 420, american boat and Yacht Council ABYC E-107 specifications, and Frustration-Free Packaging. Other search terms include: battery box, battery box rv, battery box vent, battery box boat, boat battery box, battery box 6v, marine battery box, battery box with vent, battery box 6v, rv battery box, battery box for camper, battery box marine, battery box for boat, and battery box 6 volt.

NOCO Black HM306BKS Single 6V Snap-Top Box for Automotive, Marine, and RV Batteries #ad - Its designed to limit battery movement and protect against accidental shorting of battery terminals, as well as, collect battery acid and allow adequate ventilation. The noco hm306bks snap-top battery box is designed for Automotive, Marine, and RV batteries for 6-volt batteries. And it's certified and tested to meet United States Coast Guard USCG Code of Federal Regulations 183.

More information about NOCO HM306BK #ad


Similar products



Camco 47484 Red 3/8" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47484 #ad - Camco's 24" 2 awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries. Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, gas, oil, and unaffected by acid, as well as, UV exposure.

Camco 47484 Red 3/8" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation. Certified and tested to meet united states coast guard uscg code of Federal Regulations 183. 420, american boat and Yacht Council ABYC E-107 specifications, and Frustration-Free Packaging.

2 awg wire, fits 3/8" stud. Heat-resistant up to 105C dry and available in black, red, and yellow. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

More information about Camco 47484 #ad


Similar products



Attwood 9014A3 Battery Box Hold-Down Strap, Large 54-Inch

#ad
Attwood 9014A3 #ad - Fits on battery box 9084. Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries. Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, as well as, oil, gas, and unaffected by acid, UV exposure.

Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation. Certified and tested to meet united states coast guard uscg code of Federal Regulations 183. 420, american boat and Yacht Council ABYC E-107 specifications, and Frustration-Free Packaging.

Attwood 9014A3 Battery Box Hold-Down Strap, Large 54-Inch #ad - 2 awg wire, fits 3/8" stud. Long strap is 54 inches long. Made to deliver dependable long-term service. Strap is completely resistant to battery acid. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Made of sturdy woven polypropylene. The strap is completely resistant to battery acid so it will deliver dependable long-term service.

More information about Attwood 9014A3 #ad


Similar products



BEP 701 Battery Switches - On-Off

#ad
Marinco 701 #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Three removable side plates provide access of up to 1/0 cables. Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds. This ensures the switch meets ABYC requirements.

Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Tin-plated copper studs and nuts. Fits on battery box 9084. Operation: on/off, voltage: 48v dc, 1250a dc cranking 10 sec, rating: 275a dc continuous 1hr, 455A DC Intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

BEP 701 Battery Switches - On-Off #ad - Heat resistant up to 105C dry. Strap is completely resistant to battery acid. Ignition protected. Made to deliver dependable long-term service. All bep switches are tested Independently to this specification by a 3rd party laboratory. This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches.

Has firm-grip buckles.

More information about Marinco 701 #ad


Similar products



Blue Sea 9001E E-Series Battery Switch

#ad
Acr Electronics 9001E-BSS #ad - Ip66 waterproof, iso 8846 and meets ABYC requirements. Tin-plated copper studs and nuts. This ensures the switch meets ABYC requirements. Accepts up to 4/0 AWG battery cables. Case design allows surface or rear panel mounting. Operation: on/off, voltage: 48v dc, 455a dc intermittent 5 min, rating: 275a dc continuous 1hr, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Up to 350 amperes continuous Rating Ignition protected - safe for installation aboard gasoline powered boats. Selector 4 position. Terminal stud size: 3/8" - 16. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Blue Sea 9001E E-Series Battery Switch #ad - Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries. Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, gas, and unaffected by acid, oil, as well as, UV exposure.

Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation. Certified and tested to meet united states coast guard uscg code of Federal Regulations 183.

More information about Acr Electronics 9001E-BSS #ad


Similar products



Camco 47485 Red 3/8" Stud 36" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47485 #ad - Switches isolated battery banks to all loads or combines battery banks to all loads. This ensures the switch meets ABYC requirements. Control knob can be removed by switching to counter-clockwise 45° position. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Made of sturdy woven polypropylene.

Long strap is 54 inches long. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Camco's 36" 2 awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Camco 47485 Red 3/8" Stud 36" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Tin-plated copper studs and nuts. Has firm-grip buckles. Heat-resistant up to 105C dry and available in black, red, and yellow.

Terminal stud size: 3/8" - 16. Continuous rating: 350A, Maximum voltage: 32V DC. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Camco 47485 #ad


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG

#ad
Ancor 104010 #ad - Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion. Strap is completely resistant to battery acid. Made of sturdy woven polypropylene. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries.

Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, as well as, gas, oil, and unaffected by acid, UV exposure. Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation.

Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG #ad - Certified and tested to meet united states coast guard uscg code of Federal Regulations 183. 420, american boat and Yacht Council ABYC E-107 specifications, and Frustration-Free Packaging. 2 awg wire, fits 3/8" stud. Ul 1426 listed and manufactured to the highest ABYC standards. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Made to deliver dependable long-term service.

More information about Ancor 104010 #ad


Similar products



Zoostliss Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat RV ATV Vehicles

#ad
PF #ad - Tin-plated copper studs and nuts. Heat resistant up to 105C dry. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Made to deliver dependable long-term service. Operation: on/off, rating: 275a dc continuous 1hr, voltage: 48v dc, 1250a dc cranking 10 sec, 455A DC Intermittent 5 min, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Has firm-grip buckles. Withstanding current: 12V 500A. Fits on battery box 9084. Easy to install & Simple To Use, 2 Keys. Terminal stud size: 3/8" - 16. Dependable resource for holding a battery box securely in place.

Zoostliss Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat RV ATV Vehicles #ad - Switches isolated battery banks to all loads or combines battery banks to all loads. Waterproof cover can better protect key hole. Ignition protected-safe for installation aboard gasoline powered boats. Selector 4 position. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about PF #ad


Similar products



Camco 47453 Red 3/8" Stud 12" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47453 #ad - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Tin-plated copper studs and nuts. Camco's 12" 4awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Ul 1426 listed and manufactured to the highest ABYC standards. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Long strap is 54 inches long. Operation: on/off, 1250a dc cranking 10 sec, voltage: 48v dc, 455A DC Intermittent 5 min, rating: 275a dc continuous 1hr, Stud Size: 2x3/8" 10mm.

Camco 47453 Red 3/8" Stud 12" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. 4 awg wire, fits 3/8" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat resistant up to 105C dry. Heat-resistant up to 105C dry and available in black, red, and yellow.

Control knob can be removed by switching to counter-clockwise 45° position. Ignition protected.

More information about Camco 47453 #ad


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

#ad
Blue Sea Systems 53614311 #ad - Heat resistant up to 105C dry. Rust and corrosion resistant, Solid brass nuts and washers. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

Easy to install & Simple To Use, 2 Keys. Max voltage: 300v aC/ 48V DC. Continuous rating: 130A AC/ 150A DC. Heat resistant up to 105C dry. Made of sturdy woven polypropylene. Terminal stud size: 3/8" - 16. Ul 1426 listed and manufactured to the highest ABYC standards. Ul 1426 listed and manufactured to the highest ABYC standards.

Blue Sea Systems Common 150A 10-Gang BusBar with Cover #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Strap is completely resistant to battery acid. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries.

Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, as well as, and unaffected by acid, oil, gas, UV exposure.

More information about Blue Sea Systems 53614311 #ad


Similar products