Camco 47456 Red 3/8″ Stud 72″ Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47456 #ad - Heat resistant up to 105C dry. Camco's 72" 4awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. 4 awg wire, fits 3/8" stud. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about Camco 47456 #ad

Camco 47476 Black 5/16" Stud 72" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47476 #ad - 2 awg wire, fits 5/16" stud. Camco's 72" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Heat-resistant up to 105C dry and available in black, red, and yellow.

Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ul 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

More information about Camco 47476 #ad


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

#ad
Blue Sea Systems 53614311 #ad - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ul 1426 listed and manufactured to the highest ABYC standards. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

Heat resistant up to 105C dry. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Continuous rating: 130A AC/ 150A DC. Max voltage: 300v aC/ 48V DC. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. 2 awg wire, fits 5/16" stud. 150a common busbar with 10 screws and a cover.

Blue Sea Systems Common 150A 10-Gang BusBar with Cover #ad - 2 mounting holes accept #10 M5 screws.

More information about Blue Sea Systems 53614311 #ad


Similar products



Camco 47472 Black 5/16" Stud 48" Long 2-Gauge Marine Battery Cable and Tinned Lug Assembly

#ad
Camco 47472 #ad - Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ul 1426 listed and manufactured to the highest ABYC standards. 2 awg wire, fits 5/16" stud. 2 awg wire, fits 5/16" stud. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's 48" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Camco 47472 Black 5/16" Stud 48" Long 2-Gauge Marine Battery Cable and Tinned Lug Assembly #ad - . Tin plated 95% copper lugs for superior corrosion and oxidation resistance. 2 mounting holes accept #10 M5 screws. 150a common busbar with 10 screws and a cover. Continuous rating: 130A AC/ 150A DC. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

More information about Camco 47472 #ad


Similar products



Glarks 540pcs 22-16/16-14/12-10 Gauge Mixed Quick Disconnect Electrical Insulated Butt Bullet Spade Fork Ring Solderless Crimp Terminals Connectors Assortment Kit

#ad
Glarks G-B007 #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Max voltage: 300v aC/ 48V DC. 100% brand new high quality insulated crimp terminals connectors Package quantity: 540pcs Red Wire range: 05~1. 5mm², A. W. G.

22~16, max. Current = 19a blue Wire range: 1. 5~2. 5mm², A. W. G. 16~14, max. Current = 27a yellow wire range: 4~6mm², A. W. G. 12~10, max. Current = 48a package includes: ring m4---------------45pcsred: 20pcs, please use profession crimping tool 2 awg wire, blue: 15pcs yellow: 10pcs spade 250 female fully-insulated--45pcsred: 20pcs, blue: 15pcs yellow: 10pcs piggy back-------------45pcsred: 20pcs, blue: 15pcs yellow: 10pcs bullet male-------------45pcsred: 20pcs, blue: 15pcs yellow: 10pcs bullet female ------------45pcsred: 20pcs, blue: 15pcs yellow: 10pcs spade 250 female semi-insulated--45pcsred: 20pcs, blue: 15pcs Yellow: 10pcs Ring M6---------------45pcsRed: 20pcs, Blue: 15pcs Yellow: 10pcs Fork Spade M5-----------45pcsRed: 20pcs, Blue: 15pcs Yellow: 10pcs Spade 250 Male Semi-insulated---45pcsRed: 20pcs, Blue: 15pcs Yellow: 10pcs Fork Spade M4-----------45pcsRed: 20pcs, Blue: 15pcs Yellow: 10pcs Butt Splice-------------45pcsRed: 20pcs, Blue: 15pcs Yellow: 10pcs NOTE: For best results, Blue: 15pcs Yellow: 10pcs Ring M5---------------45pcsRed: 20pcs, fits 5/16" stud.

Glarks 540pcs 22-16/16-14/12-10 Gauge Mixed Quick Disconnect Electrical Insulated Butt Bullet Spade Fork Ring Solderless Crimp Terminals Connectors Assortment Kit #ad - 2 mounting holes accept #10 M5 screws. Heat resistant up to 105C dry.

More information about Glarks G-B007 #ad


Similar products



Fastronix Red and Black Top Post Style Flexible Battery Terminal Cover

#ad
404-100 #ad - 2 awg wire, fits 5/16" stud. Package quantity: 540pcs. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat resistant up to 105C dry.

Ul 1426 listed and manufactured to the highest ABYC standards. Wire range: 22-16 red / 16-14 blue / 12-10 yellow A. W. G. Includes 1 red and 1 Black Terminal Cover. Use with fastronix 405-003 and 405-004 for a Complete Installation. Ul 1426 listed and manufactured to the highest ABYC standards. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

Fastronix Red and Black Top Post Style Flexible Battery Terminal Cover #ad - Package includes: fully / semi female / male insulated spade fork ring butt bullet Piggy back quick disconnect insulated crimp terminals connectors. Continuous rating: 130A AC/ 150A DC. 150a common busbar with 10 screws and a cover. Use for a professional looking installation and to protect battery terminal ends from corrosion and shorting.

Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about 404-100 #ad


Similar products



BEP 701 Battery Switches - On-Off

#ad
Marinco 701 #ad - 2 mounting holes accept #10 M5 screws. Wire range: 22-16 red / 16-14 blue / 12-10 yellow A. W. G. Ignition protected. Operation: on/off, 1250a dc cranking 10 sec, voltage: 48v dc, rating: 275A DC Continuous 1hr, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Three removable side plates provide access of up to 1/0 cables. Max voltage: 300v aC/ 48V DC. The control knob can be removed by switching to an counterclockwise 45 degree position. Selection of - quality copper and pvc materials processing, Comply with UL and RoHS standards. This ensures the switch meets ABYC requirements.

BEP 701 Battery Switches - On-Off #ad - Continuous rating: 130A AC/ 150A DC. 2 awg wire, fits 5/16" stud. The rear cover insulating the rear terminals against any short circuits. All bep switches are tested Independently to this specification by a 3rd party laboratory. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Marinco 701 #ad


Similar products



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

#ad
Blue Seas 5026 #ad - 2 mounting holes accept #10 M5 screws. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. 3. 32"w x 6. 5"h x 1. 52"d. 2 awg wire, fits 5/16" stud. Slides on up to 2/0 gauge Cable Prior to Installing Battery Terminal. Ul 1426 listed and manufactured to the highest ABYC standards.

150a common busbar with 10 screws and a cover. Can be used for 24-hour circuits. Positive distribution bus with #10-32 stud. Heat resistant up to 105C dry. Accepts ato and ATC fast acting blade fuses. Use for a Professional looking Battery Installation. Fuses sold separately. Tin-plated copper studs and nuts. Control knob can be removed by switching to counter-clockwise 45° position.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Wire range: 22-16 red / 16-14 blue / 12-10 yellow A. W. G.

More information about Blue Seas 5026 #ad


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG

#ad
Ancor 104010 #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. 150a common busbar with 10 screws and a cover. Slides on up to 2/0 gauge Cable Prior to Installing Battery Terminal. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Package quantity: 540pcs.

Max voltage: 300v aC/ 48V DC. 2 mounting holes accept #10 M5 screws. Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion. 2 awg wire, fits 5/16" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ancor marine grade wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis.

Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG #ad - This ensures the switch meets ABYC requirements. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing. Exceeds all ul 1426, us coast guard Charterboat CFR Title 46 and ABYC standards.

Heat resistant up to 105C dry.

More information about Ancor 104010 #ad


Similar products



Camco 47474 Black 5/16" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47474 #ad - Positive distribution bus with #10-32 stud. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Heat-resistant up to 105C dry and available in black, red, and yellow. They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, oil, battery acid, abrasion and ultra-violet radiation.

2 awg wire, fits 5/16" stud. Heat resistant up to 105C dry. 2 mounting holes accept #10 M5 screws. Max voltage: 300v aC/ 48V DC. Selection of - quality copper and pvc materials processing, Comply with UL and RoHS standards. 2 awg wire, fits 5/16" stud. Control knob can be removed by switching to counter-clockwise 45° position.

Camco 47474 Black 5/16" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Camco's 24" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. 100% brand new high quality insulated crimp terminals connectors. Can be used for 24-hour circuits.

More information about Camco 47474 #ad


Similar products



Camco 47473 Black 5/16" Stud 12" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47473 #ad - Heat resistant up to 105C dry. Ul 1426 listed and manufactured to the highest ABYC standards. Ul 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry. Operation: on/off, rating: 275a dc continuous 1hr, 1250a dc cranking 10 sec, 455a dc intermittent 5 min, voltage: 48V DC, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Use with fastronix 405-003 and 405-004 for a Complete Installation. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Use for a Professional looking Battery Installation.

Camco 47473 Black 5/16" Stud 12" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Ul 1426 listed and manufactured to the highest ABYC standards. 2 mounting holes accept #10 M5 screws. 100% brand new high quality insulated crimp terminals connectors. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Package includes: fully / semi female / male insulated spade fork ring butt bullet Piggy back quick disconnect insulated crimp terminals connectors.

Package quantity: 540pcs. Ignition protected. Heat resistant up to 105C dry.

More information about Camco 47473 #ad


Similar products