Camco 47451 Red 3/8″ Stud 32″ Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47451 #ad - Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Camco's 32" 4awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Heat-resistant up to 105C dry and available in black, red, and yellow. Ul 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat resistant up to 105C dry. 4 awg wire, fits 3/8" stud. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Camco 47451 Red 3/8" Stud 32" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Camco 47451 #ad

Camco 47441 Black 5/16" Stud 32" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47441 #ad - 4 awg wire, fits 5/16" stud. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Heat-resistant up to 105C dry and available in black, red, and yellow. Heat resistant up to 105C dry. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Camco's 32" 4awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Camco 47441 Black 5/16" Stud 32" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Ul 1426 listed and manufactured to the highest ABYC standards.

More information about Camco 47441 #ad


Similar products



BEP 701 Battery Switches - On-Off

#ad
Marinco 701 #ad - Operation: on/off, 1250a dc cranking 10 sec, voltage: 48v dc, rating: 275a dc continuous 1hr, 455A DC Intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Tin-plated copper studs and nuts. The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature.

Control knob can be removed by switching to counter-clockwise 45° position. Ignition protected. All bep switches are tested Independently to this specification by a 3rd party laboratory. Three removable side plates provide access of up to 1/0 cables. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

BEP 701 Battery Switches - On-Off #ad - This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715. Ul 1426 listed and manufactured to the highest ABYC standards. Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds.

The continuous and intermittent ratings are tested at 110% of specified ratings. Heat resistant up to 105C dry.

More information about Marinco 701 #ad


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG

#ad
Ancor 104010 #ad - Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Operation: on/off, voltage: 48v dc, rating: 275a dc continuous 1hr, 455A DC Intermittent 5 min, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Heat resistant up to 105C dry. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion.

Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG #ad - Ancor's proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, oil, battery acid, gasoline and ultra-violet radiation. Exceeds all ul 1426, us coast guard Charterboat CFR Title 46 and ABYC standards. Ancor marine grade wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis.

They are constructed with premium vinyl insulation that is rated at 600 volts, heat, battery acid, gasoline, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation. Tin-plated copper studs and nuts. Ul 1426 listed and manufactured to the highest ABYC standards.

More information about Ancor 104010 #ad


Similar products



Camco 47473 Black 5/16" Stud 12" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47473 #ad - Heat resistant up to 105C dry. Control knob can be removed by switching to counter-clockwise 45° position. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. 4 awg wire, fits 5/16" stud. Heat resistant up to 105C dry. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Ul 1426 listed and manufactured to the highest ABYC standards. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Camco 47473 Black 5/16" Stud 12" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Ignition protected. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin-plated copper studs and nuts.

Camco's 12" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Heat-resistant up to 105C dry and available in black, red, and yellow.

More information about Camco 47473 #ad


Similar products



Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red

#ad
Acr Electronics 6006 #ad - Switches a single battery to a single load group. Ignition protected. With removable knob. This ensures the switch meets ABYC requirements. 2. 83"w x 2. 83"h x 3. 1"d. Operation: on/off, 455a dc intermittent 5 min, rating: 275a dc continuous 1hr, voltage: 48v dc, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

4 awg wire, fits 5/16" stud. Ignition protected-safe for installation aboard gasoline powered boats. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Single circuit on-off. Ul 1426 listed and manufactured to the highest ABYC standards. Heat resistant up to 105C dry.

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red #ad - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ip66 waterproof, iso 8846 and meets ABYC requirements. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Heat resistant up to 105C dry. Continuous rating: 300A, Maximum Voltage: 48V DC.

More information about Acr Electronics 6006 #ad


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

#ad
Blue Sea Systems 53614311 #ad - Ul 1426 listed and manufactured to the highest ABYC standards. Ignition protected. Heat resistant up to 105C dry. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Ip66 waterproof, iso 8846 and meets ABYC requirements. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

Blue Sea Systems Common 150A 10-Gang BusBar with Cover #ad - Heat resistant up to 105C dry. This ensures the switch meets ABYC requirements. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Continuous rating: 130A AC/ 150A DC. Ignition protected-safe for installation aboard gasoline powered boats. Continuous rating: 300A, Maximum Voltage: 48V DC.

Tin-plated copper studs and nuts.

More information about Blue Sea Systems 53614311 #ad


Similar products



Camco 47474 Black 5/16" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47474 #ad - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Switches a single battery to a single load group. Ignition protected-safe for installation aboard gasoline powered boats. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Make before break contact design allows switching between battery banks without power interruption. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Camco 47474 Black 5/16" Stud 24" Long 2-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Heat resistant up to 105C dry. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. 4 awg wire, fits 5/16" stud. Camco's 24" 2 awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Single circuit on-off.

More information about Camco 47474 #ad


Similar products



1 X Marine Boat Battery Power Disconnect Switch, Heavy Duty Battery Isolator Switch

#ad
seaflo SG_B00EBQOKEQ_US #ad - Make before break contact design allows switching between battery banks without power interruption. 4 awg wire, fits 5/16" stud. 150a common busbar with 10 screws and a cover. Ignition protected. Ignition protected-safe for installation aboard gasoline powered boats. This ensures the switch meets ABYC requirements.

Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable. Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position.

1 X Marine Boat Battery Power Disconnect Switch, Heavy Duty Battery Isolator Switch #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. 2 mounting holes accept #10 M5 screws. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

2-position: oN and OFF positions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about seaflo SG_B00EBQOKEQ_US #ad


Similar products



RGBSIGHT 40FT 18 Gauge Single Color LED Strip Extension Cable 18AWG 2pin 2 Color Red Black Stand Wire Conductor for LED Ribbon Lamp Tape Lighting 40 Feet per Spool

#ad
RGBSIGHT INC RGBSIGHT-1032 #ad - Ignition protected-safe for installation aboard gasoline powered boats. Heat resistant up to 105C dry. Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable. Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position.

Heat resistant up to 105C dry. Control knob can be removed by switching to counter-clockwise 45° position. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. They are constructed with premium vinyl insulation that is rated at 600 volts, oil, heat, battery acid, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, abrasion and ultra-violet radiation.

RGBSIGHT 40FT 18 Gauge Single Color LED Strip Extension Cable 18AWG 2pin 2 Color Red Black Stand Wire Conductor for LED Ribbon Lamp Tape Lighting 40 Feet per Spool #ad - 2 awg wire, fits 5/16" stud. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. 18 awg 2pin extension cable line red black stand wire for single color led strip lighting product: 2pin cable cord type: 18awg stranded wire jacket Material: PVC Flexible Color: Red & Black Rated Temperature: 80°c Condition: 100% brand new never used Voltage: 5V 12V 24V 48V DC Package included: 1pc * 40 feet 18 awg red black cable 4 awg wire, fits 5/16" stud.

Ul 1426 listed and manufactured to the highest ABYC standards. 40 feet / spool.

More information about RGBSIGHT INC RGBSIGHT-1032 #ad


Similar products



Cartman 4AWG 18-Inch Battery Inverter Cables Set, 4Gauge x 18" 1 Black & 1 Red

#ad
Cartman #ad - Cartman boat cable wire stays ultra flexible even in the most extreme conditions. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ul 1426 listed and manufactured to the highest ABYC standards. Boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Heat-resistant up to 105C. Control knob can be removed by switching to counter-clockwise 45° position. Can be used with 8v up to 50V DC systems to isolate and secure the electrical system. For all single color LED strip light. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Cartman 4AWG 18-Inch Battery Inverter Cables Set, 4Gauge x 18" 1 Black & 1 Red #ad - Heat resistant up to 105C dry. 18awg 2pin cable. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Max voltage: 300v aC/ 48V DC. They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, oil, heat, gasoline, abrasion and ultra-violet radiation.

2 awg wire, fits 5/16" stud.

More information about Cartman #ad


Similar products