Camco 47450 Red 3/8″ Stud 18″ Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47450 - Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Camco's 18" 4awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Heat resistant up to 105C dry. Ul 1426 listed and manufactured to the highest ABYC standards. Heat-resistant up to 105C dry and available in black, red, and yellow.

Camco 47450 Red 3/8" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned - 4 awg wire, fits 3/8" stud.

More information about Camco 47450

Camco 47440 Black 5/16" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47440 - Heat-resistant up to 105C dry and available in black, red, and yellow. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat resistant up to 105C dry. Ul 1426 listed and manufactured to the highest ABYC standards.

4 awg wire, fits 5/16" stud. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Camco's 18" 4awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Camco 47440 Black 5/16" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Camco 47440


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

Blue Sea Systems 53614311 - The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact. Max voltage: 300v aC/ 48V DC. 2 mounting holes accept #10 M5 screws.

4 awg wire, fits 5/16" stud. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Heat resistant up to 105C dry. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. 150a common busbar with 10 screws and a cover.

Blue Sea Systems Common 150A 10-Gang BusBar with Cover - Continuous rating: 130A AC/ 150A DC. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about Blue Sea Systems 53614311


Similar products



BEP 701 Battery Switches - On-Off

Marinco 701 - Tin-plated copper studs and nuts. This switch offers a number of unique features, allowing it to be a stand alone unit, the highlight being the patented Contour Locking System, or locked together with other switches. This ensures the switch meets ABYC requirements. The rear cover insulating the rear terminals against any short circuits.

The control knob can be removed by switching to an counterclockwise 45 degree position. The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature. Ignition protected. 150a common busbar with 10 screws and a cover.

BEP 701 Battery Switches - On-Off - Tin plated 95% copper lugs for superior corrosion and oxidation resistance. All bep switches are tested Independently to this specification by a 3rd party laboratory. This ensures that the switch meets ABYC requirements. Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds.

Heat resistant up to 105C dry. Three removable side plates provide access of up to 1/0 cables.

More information about Marinco 701


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG

Ancor 104010 - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Ancor marine grade wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing.

4 awg wire, fits 5/16" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. This ensures the switch meets ABYC requirements. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin-plated copper studs and nuts. 150a common busbar with 10 screws and a cover.

Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG - Operation: on/off, 455a dc intermittent 5 min, 1250a dc cranking 10 sec, voltage: 48V DC, Rating: 275A DC Continuous 1hr, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. They are constructed with premium vinyl insulation that is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, heat, gasoline, 105 deg C dry and 75 deg C wet, oil, abrasion and ultra-violet radiation.

. Ul 1426 listed and manufactured to the highest ABYC standards.

More information about Ancor 104010


Similar products



Cllena Battery Disconnect Switch for Marine Boat Car Rv ATV Vehicles

Cllena - Heat resistant up to 105C dry. Can be used with 8v up to 60V DC systems to isolate and secure the electrical system. Control knob can be removed by switching to counter-clockwise 45° position. Ul 1426 listed and manufactured to the highest ABYC standards. They are constructed with premium vinyl insulation that is rated at 600 volts, oil, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, gasoline, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation.

Extra heavy duty - rated: 1250 amps intermittent, 275 Amps continuous at 12V DC. Disconnects the battery safely, sleek modern appearance, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sturdy and durable. Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position.

Cllena Battery Disconnect Switch for Marine Boat Car Rv ATV Vehicles - 2 mounting holes accept #10 M5 screws. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Max voltage: 300v aC/ 48V DC. Continuous rating: 130A AC/ 150A DC. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards.

2-position: oN and OFF positions.

More information about Cllena


Similar products



Camco 47443 Black 5/16" Stud 12" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

Camco 47443 - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Instructions included: one Battery Switch 4 x bolts/hardware. Max voltage: 300v aC/ 48V DC. Tin-plated copper studs and nuts. 4 awg wire, fits 5/16" stud. Operation: on/off, voltage: 48v dc, 455a dc intermittent 5 min, 1250a dc cranking 10 sec, Rating: 275A DC Continuous 1hr, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Heat-resistant up to 105C dry and available in black, red, and yellow. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ul 1426 listed and manufactured to the highest ABYC standards.

Camco 47443 Black 5/16" Stud 12" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned - Control knob can be removed by switching to counter-clockwise 45° position. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, heat, oil, gasoline, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

Extra heavy duty - rated: 1250 amps intermittent, 275 Amps continuous at 12V DC. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. 2 mounting holes accept #10 M5 screws.

More information about Camco 47443


Similar products



Blue Sea 9001E E-Series Battery Switch

Acr Electronics 9001E-BSS - Ignition protected. Heat resistant up to 105C dry. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable.

Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position. Continuous rating: 130A AC/ 150A DC. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Blue Sea 9001E E-Series Battery Switch - Tactile indicator conveys knob position by feel only. Meets american boat and Yacht Council ABYC requirements for battery switches. Ul 1426 listed and manufactured to the highest ABYC standards. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Heat resistant up to 105C dry. They are constructed with premium vinyl insulation that is rated at 600 volts, oil, battery acid, heat, 105 deg C dry and 75 deg C wet, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation. Extra heavy duty - rated: 1250 amps intermittent, 275 Amps continuous at 12V DC.

More information about Acr Electronics 9001E-BSS


Similar products



1 X Marine Boat Battery Power Disconnect Switch, Heavy Duty Battery Isolator Switch

seaflo SG_B00EBQOKEQ_US - Max voltage: 300v aC/ 48V DC. This ensures the switch meets ABYC requirements. Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable. Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position.

2-position: oN and OFF positions. 4 awg wire, fits 5/16" stud. 2-position: oN and OFF positions. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

1 X Marine Boat Battery Power Disconnect Switch, Heavy Duty Battery Isolator Switch - Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Ignition protected-safe for installation aboard gasoline powered boats. Extra heavy duty - rated at 1250 amps momentary, 275 Amps continuous @ 12V DC. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

150a common busbar with 10 screws and a cover. 2 mounting holes accept #10 M5 screws.

More information about seaflo SG_B00EBQOKEQ_US


Similar products



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

Blue Seas 5026 - Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Can be used with 8v up to 60V DC systems to isolate and secure the electrical system. 2 mounting holes accept #10 M5 screws. 2-position: oN and OFF positions.

2-position: oN and OFF positions. Ul 1426 listed and manufactured to the highest ABYC standards. Ignition protected-safe for installation aboard gasoline powered boats. St blade fuse block - 12 circuits with negative bus and cover. Operation: on/off, 455a dc intermittent 5 min, rating: 275a dc continuous 1hr, voltage: 48V DC, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover - Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Max voltage: 300v aC/ 48V DC. Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable.

Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position. Fuses sold separately. Terminal stud size: 3/8" - 16.

More information about Blue Seas 5026


Similar products



Perko 9601DP Battery Disconnect Switch

Perko 9601DP - Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Can be used with 8v up to 60V DC systems to isolate and secure the electrical system. This ensures the switch meets ABYC requirements. Ul 1426 listed and manufactured to the highest ABYC standards.

Extra heavy duty - rated at 1250 amps momentary, 275 Amps continuous @ 12V DC. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Positive distribution bus with #10-32 stud. Ignition Protected. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Perko 9601DP Battery Disconnect Switch - These switches can be mounted in numerous locations. Heat resistant up to 105C dry. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. 2-position: oN and OFF positions. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Heat resistant up to 105C dry.

More information about Perko 9601DP


Similar products