Camco 47440 Black 5/16″ Stud 18″ Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47440 #ad - Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Camco's 18" 4awg, 5/16" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards.

Ul 1426 listed and manufactured to the highest ABYC standards. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Heat-resistant up to 105C dry and available in black, red, and yellow. 4 awg wire, fits 5/16" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Camco 47440 Black 5/16" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Heat resistant up to 105C dry.

More information about Camco 47440 #ad

Camco 47450 Red 3/8" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47450 #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Pre-assembled with premium marine quality tin0plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available. Camco's type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

4 awg wire, fits 3/8" stud. Camco's 18" 4awg, 3/8" stud premium marine quality battery cable wire is UL 1426 listed and manufactured to the highest ABYC standards. Ul 1426 listed and manufactured to the highest ABYC standards. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat resistant up to 105C dry.

Camco 47450 Red 3/8" Stud 18" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Heat-resistant up to 105C dry and available in black, red, and yellow.

More information about Camco 47450 #ad


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

#ad
Blue Sea Systems 53614311 #ad - 4 awg wire, fits 3/8" stud. Ul 1426 listed and manufactured to the highest ABYC standards. 2 mounting holes accept #10 M5 screws. Max voltage: 300v aC/ 48V DC. Continuous rating: 130A AC/ 150A DC. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Heat resistant up to 105C dry. 150a common busbar with 10 screws and a cover. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about Blue Sea Systems 53614311 #ad


Similar products



BEP 701 Battery Switches - On-Off

#ad
Marinco 701 #ad - The continuous and intermittent ratings are tested at 110% of specified ratings. Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds. Control knob can be removed by switching to counter-clockwise 45° position. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions.

Continuous rating: 130A AC/ 150A DC. Three removable side plates provide access of up to 1/0 cables. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. This switch offers a number of unique features, allowing it to be a stand alone unit, the highlight being the patented Contour Locking System, or locked together with other switches.

BEP 701 Battery Switches - On-Off #ad - The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature. 2 mounting holes accept #10 M5 screws. 4 awg wire, fits 3/8" stud. This ensures the switch meets ABYC requirements. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

The control knob can be removed by switching to an counterclockwise 45 degree position. This ensures that the switch meets ABYC requirements.

More information about Marinco 701 #ad


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Red, 100 Feet, 14 AWG

#ad
Ancor 104810 #ad - Operation: on/off, voltage: 48v dc, 455a dc intermittent 5 min, rating: 275a dc Continuous 1hr, 1250A DC Cranking 10 sec, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Ancor marine grade wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis.

Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Tin-plated copper studs and nuts. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Ancor Marine Grade Primary Wire and Battery Cable Red, 100 Feet, 14 AWG #ad - Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. 4 awg wire, fits 3/8" stud. Heat resistant up to 105C dry. They are constructed with premium vinyl insulation that is rated at 600 volts, oil, 105 deg C dry and 75 deg C wet, gasoline, battery acid, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

Control knob can be removed by switching to counter-clockwise 45° position. Max voltage: 300v aC/ 48V DC. Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing.

More information about Ancor 104810 #ad


Similar products



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

#ad
Blue Sea Systems 5026 #ad - 3. 32"w x 6. 5"h x 1. 52"d. Can be used for 24-hour circuits. 150a common busbar with 10 screws and a cover. Control knob can be removed by switching to counter-clockwise 45° position. Continuous rating: 130A AC/ 150A DC. Ignition protected. Heat resistant up to 105C dry. This ensures the switch meets ABYC requirements.

Fuses sold separately. Max voltage: 300v aC/ 48V DC. Positive distribution bus with #10-32 stud. Accepts ato and ATC fast acting blade fuses. Fuse block, 12 circuit, w/negative bus and cover, atc/ato, Mfg# 5026, 32VDC max W/30Amp max per circuit & 100Amp per block. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover #ad - Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Tin-plated copper studs and nuts. Ul 1426 listed and manufactured to the highest ABYC standards.

4 awg wire, fits 3/8" stud. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

More information about Blue Sea Systems 5026 #ad


Similar products



NOCO Black HM306BKS Single 6V Snap-Top Box for Automotive, Marine, and RV Batteries

#ad
NOCO HM306BK #ad - Its designed to limit battery movement and protect against accidental shorting of battery terminals, as well as, collect battery acid and allow adequate ventilation. 4 awg wire, fits 3/8" stud. This ensures the switch meets ABYC requirements. And it's certified and tested to meet United States Coast Guard USCG Code of Federal Regulations 183.

420, american boat and Yacht Council ABYC E-107 specifications, and Frustration-Free Packaging. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Ignition protected. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

NOCO Black HM306BKS Single 6V Snap-Top Box for Automotive, Marine, and RV Batteries #ad - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Continuous rating: 130A AC/ 150A DC. Can be used for 24-hour circuits. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. It maintains it impact properties down to minus 20 degrees Fahrenheit, and unaffected by acid, oil, gas, as well as, UV exposure.

Tin-plated copper studs and nuts.

More information about NOCO HM306BK #ad


Similar products



Camco 37420-A Flexible Camper Drain 37420

#ad
Camco 37420-A #ad - This ensures the switch meets ABYC requirements. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. The drain tap is made of durable, chemical resistant polypropylene which provides resistance to rust. Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

Max voltage: 300v aC/ 48V DC. 2 mounting holes accept #10 M5 screws. Camco rv flexible camper Drain is designed especially for campers and RVs. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Ul 1426 listed and manufactured to the highest ABYC standards.

Camco 37420-A Flexible Camper Drain 37420 #ad - The evacuation flange is made of durable ABS construction with UV stabilizers which provide resistance to rust. Control knob can be removed by switching to counter-clockwise 45° position. Can be used for 24-hour circuits. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Positive distribution bus with #10-32 stud. Continuous rating: 130A AC/ 150A DC.

More information about Camco 37420-A #ad


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

#ad
Link Solar #201809213LS #ad - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Heat resistant up to 105C dry. Rust-proof material. Type 3 boat cable wire stays ultra flexible even in the most extreme conditions. They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, 105 deg C dry and 75 deg C wet, battery acid, oil, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

St blade fuse block - 12 circuits with negative bus and cover. Positive distribution bus with #10-32 stud. This ensures the switch meets ABYC requirements. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. It can also be used for other installations and structures such as buildings, sheds and other roofs Manufactured by Link Solar 4 awg wire, garages, fits 3/8" stud.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. 2 mounting holes accept #10 M5 screws. Ul 1426 listed and manufactured to the highest ABYC standards. Tin-plated copper studs and nuts. Can be used for 24-hour circuits.

More information about Link Solar #201809213LS #ad


Similar products



Camco 47453 Red 3/8" Stud 12" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned

#ad
Camco 47453 #ad - Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries. Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, gas, and unaffected by acid, oil, as well as, UV exposure.

Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation. Certified and tested to meet united states coast guard uscg code of Federal Regulations 183. 420, american boat and Yacht Council ABYC E-107 specifications, and Frustration-Free Packaging.

Camco 47453 Red 3/8" Stud 12" Long 4-Gauge Marine Battery Cable and Lug Assembly Tinned #ad - Color: Black. Operation: on/off, rating: 275a dc continuous 1hr, voltage: 48v dc, 1250A DC Cranking 10 sec, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc.

4 awg wire, fits 3/8" stud. Control knob can be removed by switching to counter-clockwise 45° position. Accepts ato and ATC fast acting blade fuses.

More information about Camco 47453 #ad


Similar products



MICTUNING LED Illuminated Automotive Blade Fuse Holder Box 10-Circuit Fuse Block with Cover

#ad
MICTUNING #ad - Simply quick setup: dc 32v voltage, 100a max. Corrosion-resistant: tin-plating copper components, non-toxic and tasteless layer, good hardness and conductivity. Fantastic means of power distribution this is a 10-way blade fuse block that a common bus supplying power for 10 circuits at the same time, suitable for auto, such as the installation for trailer brake controller, old motor, headlights, off road cars, ship and others, GPS, car alarm, auxiliary lamp, etc.

Heavy-duty grade battery box for Automotive, Marine, and RV batteries for 6-volt batteries. Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, gas, and unaffected by acid, oil, as well as, UV exposure.

MICTUNING LED Illuminated Automotive Blade Fuse Holder Box 10-Circuit Fuse Block with Cover #ad - Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation. Certified and tested to meet united states coast guard uscg code of Federal Regulations 183. 420, american boat and Yacht Council ABYC E-107 specifications, and Frustration-Free Packaging.

Color: Black. Heat resistant up to 105C dry. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

More information about MICTUNING #ad


Similar products