Anmbest 10 Pack 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply Buck Module 800mA

Anmbest - Anmbest 10pcs 3 pins AMS1117-3. 3 dc 4. 75v-12v to 3. 3v voltage regulator step down power supply Buck Module 800mA Features: Output current: 1A Line adjustment rate: 02% maximum Load regulation: 04% max. Package type: sot-223 operating junction temperature range: -40 to 125°C Welding temperature 25 seconds: 265°C Storage temperature: - 65~150°C Output voltage: 3.

267 to 3. 333v iout: 0 to 1a, VIN :4. 75v to 12v line adjustment maximum: 10mV VIN :4. 75v to 12v load regulation maximum: 15mv vin = 5V, IOUT: 0 to 1A Voltage difference maximum: 1. 3v current limit: 900 ~ 1500ma quiescent current Max: 10mA Ripple suppression minimum: 60dB Size:8. 6mm x 12. 33mm note: 1. Please do not exceed operating voltage, or it will be damaged easily! 2.

Anmbest 10 Pack 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply Buck Module 800mA - Exceeding the maximum allowable power consumption will result in excessive chip temperature 3. Can not reverse polarity, or it will result in short circuit! Package included: 10 x AMS1117-3. 3 module ams1117-3. 3 is a positive voltage regulator step down power Supply Module, support DC 4. 75-12v input and 3.

More information about Anmbest

Makerfocus 4pcs ESP8266 Esp-01 Serial Wireless Wifi Transceiver Module Compatible with Arduino

Makerfocus SE154 - There is the way to guide you to use the new version in the pictures, pls refer to the pictures carefully. Version ii to test this module youtube tutorial: https://youtu. Be/hdt8fs9t6li ; version I youtube tutorial: https://www. Youtube. Com/watch?v=qU76yWHeQuw. Support 3 modes: ap, stA, AP + STA. Pls feel free to email us if you have any question about how to use the new vertion module.

It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Specifications:serial/uaRT baud rate: 115200 bpsInput power: 3. 3vi/o voltage tolerance: 3. 6v maxflash memory size: 1mb 8mbitwifi security modes: wpa, wpa2package Including4 * ESP8266 Wifi Transceiver Module Note:there are a batch of this esp01 modules are the new grade version.

Makerfocus 4pcs ESP8266 Esp-01 Serial Wireless Wifi Transceiver Module Compatible with Arduino - Link to view the technical details, https://nurdspace. Nl/esp8266, introduction: https://github. Com/sleemanj/ESP8266_Simple. Model: esp-01. Compatible with arduino. Maybe there are some different between the new one and old one in the aspect of usage.

More information about Makerfocus SE154


Similar products



ESP8266 NodeMcu ESP8266 Module 4pcs,ESP-12E NodeMcu LUA CP2102 Internet WiFi Development Board Works with Arduino IDE/Micropython

ETMall - Download and run the 32 bit flasher exe at GithubSearch for nodemcu/nodemcu-flasher/tree/master/ at Github github. Com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at: github. Com/nodemcu/nodemcu-flasher/tree/master/Win64/Release 7. How to email us? click "MakerFocus" and click "Ask a question".

Model: esp-01. Compatible with arduino. 5. Package including: 4 * esp8266 esp-12e nodemcu development Board Note:there are a batch of this esp01 modules are the new grade version. More information about it, DOUT, refer to: https://github. Com/espressif/esptool/wiki/SPI-Flash-Modes. Feature: esp8266 nodemcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs.

ESP8266 NodeMcu ESP8266 Module 4pcs,ESP-12E NodeMcu LUA CP2102 Internet WiFi Development Board Works with Arduino IDE/Micropython - High quality & guaranteed:60 days money back guarantee for any quality reasons, and 24-hour customer service. There is the way to guide you to use the new version in the pictures, pls refer to the pictures carefully. Version ii to test this module youtube tutorial: https://youtu. Be/hdt8fs9t6li ; version I youtube tutorial: https://www.

More information about ETMall


Similar products



Makerfocus 4pcs ESP8266 Esp-01 Serial Wireless WiFi Transceiver Module Compatible with Arduino nRF24L01+ and ESP8266 ESP-01 Adapter

Makerfocus - Maybe there are some different between the new one and old one in the aspect of usage. How to email us? click "MakerFocus" and click "Ask a question". Pls feel free to email us if you have any question about how to use the new vertion module. Link to view the technical details, https://nurdspace. Nl/esp8266, introduction: https://github.

Com/sleemanj/ESP8266_Simple. Model: esp-01. Compatible with arduino. Pls note: "nrf24l01+" is a model type, doesn't mean "+" anything; arduino NRF24L01+ module may be purchased from: https://www. Amazon. Com/dp/b00o9o868g, and esp8266 esp-01 may be purchased from: https://www. Amazon. Com/dp/b01ea3UJJ4. The bb-adtr breadboard adapter makes it easy to connect any 2*4 pin device or module, such as an "nRF24L01+" or ESP8266 ESP-01 module, to a standard breadboard.

The adapter has a wide enough footprint to secure the board and a connected module firmly to a breadboard, but is small enough to conserve breadboard real estate. Made of a quality 1. 6mm thick fr4 industrial-quality pcb board with the pads pre-tinned with a lead free HASL finish; Adapter comes unassembled, soldering required, we made sure this little board would be durable and easy to solder.

Makerfocus 4pcs ESP8266 Esp-01 Serial Wireless WiFi Transceiver Module Compatible with Arduino nRF24L01+ and ESP8266 ESP-01 Adapter - We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking for your consultation!

More information about Makerfocus


Similar products



Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New

Allwish BC22523 - Brand new, 90 Days Warranty. Link to view the technical details, https://nurdspace. Nl/esp8266, introduction: https://github. Com/sleemanj/ESP8266_Simple. If you receive different versions module, please carefully follow the pictures and youtube video to test. Why esp8266:esp8266 is a highly integrated chip designed for the needs of a new connected world.

It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Firmware link: https://github. Com/nodemcu/nodemcu-firmware;The Data download access to the website: http://www. Nodemcu.

Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New - Com; test Video:https://www. Youtube. Com/watch?v=Gh_pgqjfeQc. Four spi flash access modes:the esp8266 support four different spi flash access modes: dio, qio & qOUT. The transceiver consists of a fully integrated frequency synthesizer, a crystal oscillator, a demodulator, a power amplifier, modulator and Enhanced ShockBurst? protocol engine.

Note:there are a batch of this esp01 modules are the new grade version. How to email us? click "MakerFocus" and click "Ask a question".

More information about Allwish BC22523


Similar products



ESP-01S USB to ESP8266 ESP-01S Wireless Wifi Adapter Module Wi-Fi CH340G 4.5-5.5V, 115200 Baud Rate

Stemedu - Model: esp-01. Compatible with arduino. Warranty: life time warranty, any question please contact freely. Maybe there are some different between the new one and old one in the aspect of usage. Support 3 modes: ap, stA, AP + STA. Pls feel free to email us if you have any question about how to use the new vertion module.

These can be set via the --flash_mode option of esptool. Py write_flash. Uart side for serial ttl debugging by at commands, PROG for firmware programming USB to serial TTL chip: CH340G Logic level: 3. 3v applications: home automation, sensor networks, industrial wireless control package included: 1 X ESP8266 ESP-01S 1 X USB to ESP8266 ESP-01 Wireless Wifi Adapter Module Note:there are a batch of this esp01 modules are the new grade version.

ESP-01S USB to ESP8266 ESP-01S Wireless Wifi Adapter Module Wi-Fi CH340G 4.5-5.5V, 115200 Baud Rate - Usb to serial ttl chip: cH340G, please install driver before use it. Model: nrf24L01. Baud rate: 115200, selectable working mode: on-board toggle switch. Brand new, 90 Days Warranty. Description: baud rate: 115200usb to esp-01 adapter module has ch340g usb to ttl driver ic onboard, so you can easily use your computer to do ESP-01 functional debugging ESP-01 serial wifi module can be directly plugged into the yellow pin header without any connection wires Features: Working voltage: 4.

5v - 5. 5v on-board 3.

More information about Stemedu


Similar products



HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE

HiLetgo® 3-01-1287 - Warranty: life time warranty, any question please contact freely. What you will get: 1pcs esP-01S and 1PCS Adapter. 2. 4ghz dual mode wifi + Bluetooth Development Board. More information about it, DOUT, refer to: https://github. Com/espressif/esptool/wiki/SPI-Flash-Modes. Feature: esp8266 nodemcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs.

High quality & guaranteed:60 days money back guarantee for any quality reasons, and 24-hour customer service. This breadboard adapter common to "nrf24l01+" or esp8266 esp-01 module. Hiletgo esp-wroom-32 esp32 esp-32s Development Board 2. 4ghz dual-mode wifi + bluetooth dual cores microcontroller the esp32 integrated with Antenna switches, and management modules, RF Balun, low-noise amplifiers, filters, power amplifiers, and the entire solution occupies the least area of PCB.

HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE - Support 3 modes: ap, stA, AP + STA. Esp32 is a safe, reliable, and scalable to a variety of applications. Note:there are a batch of this esp01 modules are the new grade version. Ultra-low power consumption, works perfectly with the Arduino IDE. If you receive different versions module, please carefully follow the pictures and youtube video to test.

More information about HiLetgo® 3-01-1287


Similar products



Cylewet 10Pcs 3.3V-5V 4 Channels Logic Level Converter Bi-Directional Shifter Module for Arduino Pack of 10 CYT1076

Qianxin - These can be set via the --flash_mode option of esptool. Py write_flash. If you receive different versions module, please carefully follow the pictures and youtube video to test. Why esp8266:esp8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

Firmware link: https://github. Com/nodemcu/nodemcu-firmware;The Data download access to the website: http://www. Nodemcu. Com; test Video:https://www. Youtube. Com/watch?v=Gh_pgqjfeQc. Four spi flash access modes:the esp8266 support four different spi flash access modes: dio, qio & qOUT. 5v connects to HV pin; 3. 3v connects to lv pin; Ground from the system connects to GND pin.

Cylewet 10Pcs 3.3V-5V 4 Channels Logic Level Converter Bi-Directional Shifter Module for Arduino Pack of 10 CYT1076 - Brand new, 90 Days Warranty. Warranty: life time warranty, any question please contact freely. Baud rate: 115200, selectable working mode: on-board toggle switch.

More information about Qianxin


Similar products



4Pcs ESP8266 Serial WiFi Module ESP-01 Updated Wireless Transceiver Board 3.3V for Arduino

Deegoo - Esp-01 serial wifi module can be directly plugged into the yellow pin header without any connection wires. How to email us? click "MakerFocus" and click "Ask a question". Model: esp-01. Compatible with arduino. Uart side for serial ttl debugging by AT commands, PROG for firmware programming. Brand new, 90 Days Warranty.

Model: esp-01. Compatible with arduino. 2. 4ghz dual mode wifi + Bluetooth Development Board. Baud rate: 115200, selectable working mode: on-board toggle switch. Maybe there are some different between the new one and old one in the aspect of usage. If you receive different versions module, please carefully follow the pictures and youtube video to test.

4Pcs ESP8266 Serial WiFi Module ESP-01 Updated Wireless Transceiver Board 3.3V for Arduino - Why esp8266:esp8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Firmware link: https://github.

Com/nodemcu/nodemcu-firmware;The Data download access to the website: http://www. Nodemcu.

More information about Deegoo


Similar products



HiLetgo 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 2PCS

HiLetgo 3-01-0268 - Esp-01 serial wifi module can be directly plugged into the yellow pin header without any connection wires. Package included: 2* new version esp8266 nodemcu lua cp2102 WiFi Wireless Development Board Note:there are a batch of this esp01 modules are the new grade version. Support 3 modes: ap, stA, AP + STA.

What you will get: 1pcs esP-01S and 1PCS Adapter. Set up your chip as: tools -> Board -> NodeMCU 1. 0 esp-12e module tools -> flash size -> 4m 3m spiffs tools -> cpu frequency -> 80 mhz tools -> Upload Speed -> 921600 Tools-->Port--> whatever it is 6. Support 3 modes: ap, stA, AP + STA. Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.

HiLetgo 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 2PCS - Maybe there are some different between the new one and old one in the aspect of usage. 8. 5. Warranty: life time warranty, any question please contact freely. Full i/o port and wireless 802. 11 supported, direct download no need to reset. Brand new, 90 Days Warranty.

More information about HiLetgo 3-01-0268


Similar products



MagiDeal 10pcs Female MICRO USB to DIP 5-Pin Pinboard 2.54mm micro USB type

MagiDeal STK0114017570 - Full i/o port and wireless 802. 11 supported, direct download no need to reset. Ultra-low power consumption, works perfectly with the Arduino IDE. There is the way to guide you to use the new version in the pictures, pls refer to the pictures carefully. Version ii to test this module youtube tutorial: https://youtu.

Be/hdt8fs9t6li ; version I youtube tutorial: https://www. Youtube. Com/watch?v=qU76yWHeQuw. Data download access to the website: http://www. Nodemcu. Com. Support 3 modes: ap, stA, AP + STA. 2. 4ghz dual mode wifi + Bluetooth Development Board. Model: esp-01. Compatible with arduino. Pls feel free to email us if you have any question about how to use the new vertion module.

MagiDeal 10pcs Female MICRO USB to DIP 5-Pin Pinboard 2.54mm micro USB type - Complete and self-contained Wi-Fi networking solution. Esp8266 is a wifi enabled Microcontroller - Arduino ready. Note: the item only supports 3. 3v, please don't use 5V!

More information about MagiDeal STK0114017570


Similar products