3000Watt Pure Sine Wave Power Inverter 12V DC to 120V AC with 4 AC Outlets Dual 2.4A USB Ports Remote Control & LCD Display by VOLTWORKS

#ad
VOLTWORKS #ad - 3000watt pure sine wave power inverter 12v DC to 120V AC with 4 AC Outlets Dual 2. 4a usb ports remote control & lcd display by voltworks 3000w pure sine wave inverter】true rated continuous 3000watts pure sine wave output power and 6000Watts peak power, 2 USB port, featuring 4 AC outlets, LCD display and remote control.

More widely used】widely applications for indoor and outdoor uses- ideal for RVs, and power failure emergencies with this 3000W heavy duty inverter, etcquipped with 4 AC outlets and 2 USB port, Boats, convenient for you to use multiple appliances at the same time. Lcd display and remote control】featured with a lcd display, which can let you know the input and output voltage so that you can know the using status of your battery.

3000Watt Pure Sine Wave Power Inverter 12V DC to 120V AC with 4 AC Outlets Dual 2.4A USB Ports Remote Control & LCD Display by VOLTWORKS #ad - And the remote controller is also more convenience for you to control inverter on/off. Advance protection】including short circuit protection, over-load, over-current, Outputshort-circuit, Input over-voltage/ under-voltageprotection, over-temperature protection. What you get】 a 3000w pure sine wave inverter, 2 pairs of Battery Cables, a 15ft remote controller, a instruction manual, a friendly and patient customer after-service.

More information about VOLTWORKS #ad

SELTERM 5 Pack 2/0 Gauge 2/0 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Lugs are suitable for use with Welding Cables and Battery Cables.

Close end pad seals Out Moisture Keeping Cables Dry. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. Heavy duty construction for Enhanced High Temperature Durability. Ul tested & Approved. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.

SELTERM 5 Pack 2/0 Gauge 2/0 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Can be Crimped or Soldered. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

More information about SELTERM #ad


Similar products



BougeRV MC4 Connectors Y Branch Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel

#ad
BougeRV ISE002FBM #ad - Ul tested & Approved. Heavy duty construction for Enhanced High Temperature Durability. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V. The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Can be Crimped or Soldered.

Close end pad seals Out Moisture Keeping Cables Dry. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male. Specifications: insulation material: ppo rated current: 20a4mm²) rated voltage: dc1000v contact resistance: ≤5mΩ insulation resistance: >500mΩ Operating Temperature range: -40℃ until+90℃ Degree of Protection: IP67 Flame Class: UL94-V0 Safety Degree: Ⅱ Suitable Single Core Cable Section: 1.

BougeRV MC4 Connectors Y Branch Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel #ad - 5mm² -- 6mm² include awg14, awg11, awg12, awg13, awg10 package included: 1 pair of y branch MC4 Solar Panel Cable Connectors Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

More information about BougeRV ISE002FBM #ad


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

#ad
Link Solar #201809213LS #ad - Link solar abs solar cable entry gland is used for the passing of cables into the Motorhome, from the Solar panel, or for use on yachts /boats for cable entry from the mast. Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. Can be Crimped or Soldered. It can also be used for other installations and structures such as buildings, garages, sheds and other roofs Manufactured by Link Solar Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat #ad - Suitable for most round cables for Solar Panel, Air conditioning, Aerial, satellite, DC power, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc. The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals.

An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V.

More information about Link Solar #201809213LS #ad


Similar products



12 Circuits with Negative Bus & Cover - Blue Sea Systems ST Blade Fuse Block

#ad
Blue Sea Systems 5026 #ad - Close end pad seals Out Moisture Keeping Cables Dry. Can be Crimped or Soldered. Ul tested & Approved. Suitable for most round cables for Solar Panel, Aerial, DC power, satellite, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

12 Circuits with Negative Bus & Cover - Blue Sea Systems ST Blade Fuse Block #ad - Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc. St blade fuse block - 12 circuits with negative bus and cover. Heavy duty construction for Enhanced High Temperature Durability.

Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

More information about Blue Sea Systems 5026 #ad


Similar products



Ampper Battery Switch, 12-48 V Battery Power Cut Master Switch Disconnect Isolator for Car, Vehicle, RV and Boat On/Off

#ad
Ampper #ad - No reason for return or change. Can be used for 24-hour circuits. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Order it now! made from 100% annealed Electrolytic Grade Copper for Max Conductivity. 2, rear cover insulates terminals against any short of circuits.

Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male. Heavy duty: abs plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits, equiped with 4 sets of bolts. Operation: on/off 2 positions, 455 a intermittent at dc 12v, 275 A continuous at DC 12V, 1250 A momentary at DC 12V.

Ampper Battery Switch, 12-48 V Battery Power Cut Master Switch Disconnect Isolator for Car, Vehicle, RV and Boat On/Off #ad - Compatible: used for dc 12 - 48 v systems to isolate and secure the electrical system, can stand alone or be locked together with other switch. Purpose: eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. Copper terminal stud size: 3/8" 10 mm x 2, vehicle, Rv and boat, very easy to install, universal used for car, also electrical equipment's switch.

11, vehicle, universal used for Car, RV and Boat.13, size: 2. 68" x 2. 68" x 3.

More information about Ampper #ad


Similar products



Dicor 501LSW-1 Epdm Self-Leveling Lap Sealant-10.3 Oz. Tube, White, 10.3 Fluid_Ounces Packaging May Vary

#ad
Dicor 501LSW-1 #ad - The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Ideally suited for aftermarket use, the lap sealant is one of the highest volume products sold in RV stores today. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ul tested & Approved. Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. Suitable for most round cables for Solar Panel, Aerial, satellite, DC power, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

Dicor 501LSW-1 Epdm Self-Leveling Lap Sealant-10.3 Oz. Tube, White, 10.3 Fluid_Ounces Packaging May Vary #ad - The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. Compatible with epdm and tpo sheeting, wood, vinyl, galvanized metal, it adheres firmly to aluminum, mortar, fiberglass and concrete. Color: White. Close end pad seals Out Moisture Keeping Cables Dry. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument.

More information about Dicor 501LSW-1 #ad


Similar products



Dicor BT-1834-1 1/8" x 3/4" x 30' Butyl Seal Tape

#ad
Dicor BT-1834-1 #ad - Butyl tape only, 1/8 inch x 3/4 Inch x 30 Feet, Each. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Heavy duty construction for Enhanced High Temperature Durability. Close end pad seals Out Moisture Keeping Cables Dry. Because the sealant is on a continuous roll, installer can work fast and be virtually assured that there are no skips or runs in the seal.

1/8 inch x 3/4 inch x 30 Feet. Can be used for 24-hour circuits. Positive distribution bus with #10-32 stud. Dicor butyl tape - Ideal for sealing uniquely shaped joints. Color: White. Accepts ato and ATC fast acting blade fuses. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc.

Dicor BT-1834-1 1/8" x 3/4" x 30' Butyl Seal Tape #ad - St blade fuse block - 12 circuits with negative bus and cover. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion.

More information about Dicor BT-1834-1 #ad


Similar products



Kuman Electricity Usage Monitor Plug Power Meter Energy Watt Voltage Amps Meter with Digital LCD Display,Overload Protection and 7 Display Modes for Energy Saving NO-Backlight

#ad
kuman #ad - Color: White. Apply along unusual patterns. Because the sealant is on a continuous roll, installer can work fast and be virtually assured that there are no skips or runs in the seal. Positive distribution bus with #10-32 stud. Specifications wattage display: 0w-9999w voltage display range: 0V-9999V Frequency display: 0Hz-9999Hz Current display: 0

0a-15. 0a price display range: 000cost/kWh-99. 99cost/kwh timing display range: 0 second-9999 days Total kWh and cost display: 0000kwh-999kwh, 000cost-9999cost operating voltage: ac 120v operating frequency: 60hz wide voltage range: 110v-130v operating current: 15a max 7 different display modes: mode 1: time/watt/cost display mode 2: time/cumulative electrical Quantity Display Mode 3: Time/Voltage/Frequency Display Mode 4: Time/Current/Power Factor Display Mode 5: Time/Minimum Power Display Mode 6: Time/Maximal Power Display Mode 7: Time/Price DisplayPackage listing Power meter *1 US plug User manual*1 Notice: ● Mode 7 can directly occur while press down the button "cost" ● If an abnormal display appears or the buttons produce no response, the instrument must be reset.

Kuman Electricity Usage Monitor Plug Power Meter Energy Watt Voltage Amps Meter with Digital LCD Display,Overload Protection and 7 Display Modes for Energy Saving NO-Backlight #ad - Electricity usage monitor: Monitor is the killer of the high-cost energy appliance, helping you lower power consumption and save money. Digital lcd display: large clear LCD display for easy reading, the screen size is 47cm*60cm. Various parameters: powerw, cost and Minimum & Maximum Power, energy kWh, Voltage, Power Factor, amps, ideal for energy consumption monitor.

Overload protection: once the whole power exceeds the rated power of monitor, LCD will display "OVERLOAD" with booming noise to remind the user.

More information about kuman #ad


Similar products